TRENDnet TE-R4 User manual

The TE-R4 Ethernet repeater comply to IEEE 802.3 standard. It
enables you to join Ethernet cable segments to extend the length of
the network trunk line. It can also be used to connect more
computers to your network. Since there is a limit on the number of
computers allowed on each cable segment, you can cut the
segment into two, and then join them with an Ethernet Repeater.
This will allow more computers to be added to each network
segment.
The TE-R4 Ethernet repeater auto-partitions each port. If a problem
occurs to one of the segments, the TE-R4 will automatically isolate
the segment, therefore will not effect the operations of the other
segments.
TE-R4
4-Port Ethernet Repeater (4 BNC + 4 AUI)
Complies with IEEE 802.3 standards
Support BNC and AUI connections
Automatic partitioning
LEDs for easy troubleshooting
10Mbps transfer rate
5 Year Warranty
FEATURES PRODUCT INFORMATION
TE-R2
2-Port Ethernet Repeater
(2 BNC + 2 AUI)
TE-R4
4-Port Ethernet Repeater
(4 BNC +4 AUI)
To Order Please Call:
1-888-326-6061
ORDERING INFORMATIONORDERING INFORMATION
SPECIFICATIONS
Standards:
IEEE 802.3 10Base-2 and 10Base-5
Connectors:
4 BNC and 4 AUI
Dimensions:
441mm x 123mm x 45mm
•
•
•
TRENDnet
TRENDware, USA
What's Next in Networking
TRENDnet is a registered treademark of TRENDware International, Inc. Other Brands and product names are trademarks of their respective holders. Information provided in this
document pertain to TRENDware products and is subject to change at any time, without notice. For the most recent product information please visit ____________________
http://www.TRENDNET.com.
©
Copyright TRENDware International, Inc. 2004. All Rights Reserved.
TRENDware International, Inc.
3135 Kashiwa Street
Torrance, CA. 90505. USA
Tel: [phone]
Fax: [phone]
Web:
Email: [email protected]
www.TRENDNET.com