TREQ FORMULA User manual

TREQ
FORMULA
INSTRUCTION MANUAL
REQUIRED TOOLS:
5-6 mm

GENERAL INSTRUCTIONS
www.treq-sim.com
123
Click!
123
Break!
REQUIRED TOOL:
The easiest way to mount the click-in-nuts, is to slide them in from one side of the profile. But
don't worry if you need to put in a click-in-nut in a profile which has both ends already closed: it
is also possible to push them in the T-slot anywhere you like!
The corner brackets feature 4 little hooks to stop the bracket from rotating once it is mounted
on a profile. But on some places of the rig these corner brackets are placed on a 90° angle of
the T-slot. In these situations it is recommended to break off 2 of the hooks, which is easily
done with a screwdriver or a pincer.

1
2x 3x 2x
Profile 4080 L=985Profile 4040 L=478 Profile 4080 L=500
2x
Profile 4040 L=500
1x
Profile 4080 L=478
www.treq-sim.com
Profile 4080 L=600
2x
Pedal Bracket Left
1x
Profile 4080 L=420
2x
1x
Cover 4040
4x 10x
Cover 4080 Rubber Foot
4x
M8x20 (Black)
4x
Pedal Bracket Right
1x
Wheel Deck
2x
Side Plate
16x
M8x16

74x
Click-in Nut M8
www.treq-sim.com
Click-in Nut M5
9x
M8x20 (Black)
18x 48x
M8x16 M5x12
4x
Plain Washer M8
10x
Click-in Nut M6
4x
Additional parts
may be included.
24x
Corner 4040
Corner Cover 4040
24x

www.treq-sim.com
3
M8
(32x)
M5
(4x)
2Profile 8040 L=985 (2x)
Profile 8040 L=500 (2x)
Corner Brackets (8x)
Rubber Feet (4x)
M5x12
Profile 4040 L=500 (2x)
Corner Brackets (4x)
Cover Caps
For mounting of the F1 seat,
the distance inside the two
profiles must be 17 cm.

5
www.treq-sim.com
9
4
M8
(16x)
Profile 8040 L=600 (2x)
Profile 4040 L=500 (1x)
Corner Brackets (4x)
M8x16
(16x)

7
www.treq-sim.com
9
M8x20
(Black)
(2x)
M8
(2x)
Assembly of the Pedal Deck
M8x20
(Black)
(6x)
Profile 8040 L=478 (1x)
Profile 4040 L=478 (2x)
6
Profile 8040 L=420 (2x)
Corner Brackets (4x)

8
9
www.treq-sim.com
M8
(4x)
(4x)
M8x20
M8
(6x)
(6x)
M8x20
M8
(6x)
Assembly of Wheel Deck on the frame
Assembly of Pedal Deck on the frame

www.treq-sim.com
OPTIONAL: Some pedals, like Thrustmaster or Logitech, have threaded holes on the
bottom of the pedal base. To mount these type of pedals, please use the spare corner
brackets. Mount 1 side to a pedaldeck-profile and the other to the pedals.
For Fanatec or Heusinkveld pedals you can use click-in-nuts and mount them ‘from the
top’.

10
www.treq-sim.com
Add all missing corner bracket- and profile covers.
Your TREQ Formula Rig is done!