
SELECT, PLUG, AND PLAY
Getting started
Chameleon gives you 6 separate outlets for plugging your pedals into.
Here’s how they work:
• Outlets 1–3 can all be used to power either 9V or 12V pedals. For
each outlet, just use the VOLTAGE SELECTOR switches to choose the
voltage you need, plug in your pedal and go!
• Outlet 4 works the same way and gives you a similar choice – except
that it’s between 9V and 18V.
• Outlets 5 and 6 may only be used one at a time. If you use them
both at the same time, you might get some noise. Like outlets 1–3,
outlet 5 gives you a choice between 9V and 12V. Outlet 6 is a 12V AC
outlet for pedals that require AC power.
All the cables you need
Like all T-Rex Fuel Tank power supplies, your new Chameleon comes
with a full set of cables to help you keep your board clutter-free. Once
you’ve selected your voltage options, just plug in and play!
TECHNICAL SPECS
Size: Box cm 160 x 81 x 39 mm (in 6.29 x 3.18 x 1.53)
Weight: Gross weight kg 1.5 (lbs 3.3)
Connections: 6 isolated outputs delivering 300mA each (centre pin is
negative) AC output at connector 6. Will power all T-Rex
pedals.
Power supply: Internal, comes with country-appropriate IEC power cable
DC link cables:
2 x 20 cm
3 x 50 cm
2 x 75 cm
2 x 100 cm
1 x dc to mini jack (75cm)
1 x 5-pedal link cable (75cm)
1 x Red cable, AC voltage for the Replica
1 x Blue cable, AC voltage for Line6 pedals