TRI tool 765RVC2 User manual

Operation
Manual
92-1870 Rev. 201007
765RVC2 Hydraulic Power Supply

ABOUT TRI TOOL INC.
Tri Tool’s extensive experience in the design, development and
manufacture of portable machine tools and welding equipment
has resulted in machinery that is designed to meet the highest
standards of quality, safety, and performance. Our products are
backed by a company totally committed to service, integrity, and
customer satisfaction.
Tri Tool Services has developed a solid reputation as a trusted
provider of dependable and cost-e󰀨ective on-site service solutions
including turnkey project management, machining services, and
mechanized and manual code welding services using experienced
and well-trained machinists and welders.
In addition to developing industry leading machining and
welding equipment, Tri Tool’s engineering team provides custom
equipment design and manufacturing solutions to suit the most
rigorous requirements of our customers’ special applications.
Please contact us for more information on any of our products
or services. Company representatives are available for
demonstrations of most of our products at your facility.

765RVC2 Hydraulic Power Supply
92-1870 Rev. 201007 1
TABLE OF CONTENTS
Tri Tool Inc Warranty 2
Tool Bit Resharpening Policy 3
About the Manual 4
Safety 6
General Description 10
Specications13
Hydraulic Schematic 16
System Schematics 17
Transport 21
Installation 21
Operation 22
Maintenance 23
Conversion Procedure 29
Troubleshooting 31
Accessories 32
Illustrated Parts Breakdown 33
* Original Instructions
92-1870 Rev. 201007
765RVC2 Hydraulic Power Supply

TRI TOOL INC.
92-1870 Rev. 201007
2
TRI TOOL INC. Warranty
LIMITED WARRANTY: All products manufactured by Seller are warranted to be free from
defects in materials and workmanship under normal use. The period of this warranty shall
be three years from the date of shipment for all products, except for welding and Non-
Standard Products which shall be one year from the date of shipment. The Buyer shall bear
all shipping, packing and insurance costs and all other costs to and from a designated repair
service center. All return goods must be authorized in advance and communicated upon
issuance of a Return Material Authorization (RMA) by Seller. The product will be returned to
the Seller accompanied by a RMA number and associated paperwork, freight prepaid and
billed to the Buyer. This warranty is not transferable and will not apply to tool bits or other
consumables, or to any Goods to have been (i) mishandled, misused, abused or damaged
by Buyer or any third party; (ii) altered without the express permission in writing by Seller, (iii)
repaired by a party other than Seller without Seller’s prior written approval; or (iv) improperly
stored, installed, operated, or maintained in a manner inconsistent with Seller’s instructions.
This warranty does not apply to defects attributed to (i) normal wear and tear or (ii) failure to
comply with Seller’s safety warnings.
No warranty for any parts or other supplies provided to seller by buyer, whether or not they
are incorporated into goods. Goods supplied by seller which are designed or manufactured
by a third party are subject strictly to the third party’s warranty for those goods. Seller
makes no warranty and disclaims all statutory or implied warranties for these goods,
including the implied warranties of merchantability, freedom from patent infringement and
tnessforaparticularpurpose.
Neither this warranty nor any other warranty, expressed or implied, including implied
warrantiesofmechanicalability,tnessforaparticularuse,ormerchantability,shall
extend beyond the warranty period. No responsibility is assumed for any incidental or
consequential damages. Some states do not allow limitations on how long an implied
warranty lasts and some states do not allow the exclusion or limitations incidental or
consequential damages, so the above limitation of exclusion does not apply to all Buyers.
ThiswarrantygivestheBuyerspeciclegalrights.Otherrightsvaryfromstatetostate.
Warranty Claims and Remedies
Buyer must promptly notify Seller in writing during the applicable warranty period, of
any defective Goods covered by Seller’s warranties under the Limited Warranty section
herein,andnolaterthanfteen(15)calendardaysafterdiscoveryofthedefect.Seller
has no obligation to honor any warranty claim made after the expiration of the warranty
period. However, despite the expiration of the warranty period, Seller, at its reasonable
discretion,mayacceptwarrantyclaimssubmitteduptofteen(15)calendardaysafter
the expiration of the warranty period provided that Buyer provides Seller with credible and
persuasive documentary evidence that the defect was discovered during the warranty
period.Nowarrantyclaimssubmittedafterthisfteen(15)daycalendarperiodwillbe
considered by Seller.

765RVC2 Hydraulic Power Supply
92-1870 Rev. 201007 3
IfthedefectclaimedbyBuyercannotbereproducedorotherwiseveriedbySeller,the
GoodswillbereturnedtoBuyerunmodiedatBuyer’sexpense.
The warranty period for repaired or replaced Goods shall be (i) ninety (90) days or (ii)
the unexpired portion of the original warranty period. Under no circumstances is Seller
liable for recall, retrieval, removal, dismantling, re-installation, redeployment, or re-
commissioning of any defective Goods or any costs associated therewith.
Tool Bit Resharpening Policy
Buyer’snoticeofadefectiveGoodsmustidentifythespecicGoodsa󰀨ected,andthe
nature of the defect. It is required when returning the defective Goods, that it is suitably
packed, fully insured, and transportation and insurance prepaid in accordance with
instructions issued by Seller. Seller, at its sole option, will either repair or replace any
Goods authorized for return to Seller. Such repair, replacement, or credit shall be Buyer’s
sole remedy for defective Goods. Buyer must promptly provide Seller with all information
requestedregardingtheidentieddefect.
Buyer is required to check all tool bits prior to returning and ensure they are
packaged well for shipment. The price structure is available from the Seller’s sales
coordinator. Seller cannot resharpen badly gouged, chipped, or broken tool bits.
Seller will return tool bits that are not suitable for resharpening with the tool bits that
were resharpened, unless Seller is instructed otherwise. Buyer is responsible for all
shipping charges to and from Seller.

TRI TOOL INC.
92-1870 Rev. 201007
4
1. ABOUT THE MANUAL
1.1 Copyright
©Copyright Tri Tool Inc. Proprietary property of Tri Tool Inc. No reproduction, use, or
duplication of the information shown hereon is permitted without the express written
consent of Tri Tool Inc.
1.2 Disclaimer
The instructions and descriptions in this manual were accurate when the manual was
written. However, the information in the manual is subject to change without notice.
Check for updated information before you start any job. The Tri Tool Inc. web site has the
most current information.
Do not operate or work on this equipment unless you have read and understood
the instructions in this Manual. Failure to follow the instructions or follow the safety
instructions could result in serious injury or death. This manual describes conditions and
hazards that are common and anticipated during equipment operation. No manual can
address all conditions which may occur.
1.3 Safety Symbols
The manual may contain one or more safety symbols. These symbols and the
associated text warn you of potentially hazardous conditions. Examples of the safety
symbols and the associated text follow:
DANGER
DANGER: Indicates a hazardous situation that, if not avoided, will result
in serious injury or death.
WARNING
WARNING: Indicates a hazardous situation that, if not avoided, could result
in serious injury or death.
CAUTION
CAUTION: Indicates a hazardous situation that, if not avoided, could result
in minor or moderate injury, or cause property damage.

765RVC2 Hydraulic Power Supply
92-1870 Rev. 201007 5
GLASSES
SAFETY GLASSES: Indicates a hazardous situation that requires the use
of safety glasses.
HOT SURFACE
HOT SURFACE: Indicates a hazardous situation that hot
surfaces may be present.
Figure 1: Warning Label Locations
SHOCK HAZARD
ARC FLASH & SHOCK HAZARD: High voltage. Entry by authorized
personnel only. Appropriate PPE and tools required when working
on this equipment.
GLOVES
GLOVES: Indicates a hazardous situation that requires gloves.

TRI TOOL INC.
92-1870 Rev. 201007
6
2.2 Personal Protective Equipment
Use standard safety equipment such as: hard hats, safety shoes, safety harnesses,
protective clothes, and other safety devices when appropriate.
Wearing safety glasses is required.
Wearing safety gloves is required as surfaces may be hot.
Do not wear loose clothing or jewelry.
Wear nonskid footwear.
Put long hair in a cap or a net to make sure hair does not get tangled in equipment.
2.3 Personnel
Only personnel who are trained or are being trained may operate the equipment.
Keep the operation manual available where the equipment is used.
The operator must read the operation manual before using the equipment.
The equipment must be operated in accordance with the manual information.
The operator must follow the safety precautions in this manual and good engineering
practices to reduce the risk of injury.
Before using the equipment, the operator must ensure that all safety messages on the
equipment are legible.
2.4 Work Area
Keep the work area clean.
Keep the area well lit.
WARNING
WARNING: Do not install or place 765RVC2 over or near combustible materials.
WARNING: Do not overload the facility’s power or wiring supply.
2. SAFETY PRECAUTIONS
2.1 In General
Use standard safety equipment such as: hard hats, safety shoes, safety harnesses,
protective clothes, and other safety devices when appropriate.
Operatethistoolonlyinaccordancewithspecicoperatinginstructions.

765RVC2 Hydraulic Power Supply
92-1870 Rev. 201007 7
All four lifting points must be used to lift the hydraulic
unit. The lifting points are the four 15/16” lifting eyes.
WARNING
WARNING: Do not lift the hydraulic unit over personnel. This decreases the risk of
death and serious injury.
Figure 2: Lifting
Keep items such as electrical cords, rags, rigging straps, away from rotating equipment.
Donotusepower-cuttingtoolsinthepresenceofammableliquidsandgases.
Do not let visitors or untrained personnel near tools that are in use.
Ensure all observers wear eye protection.
Keep proper footing at all times.

TRI TOOL INC.
92-1870 Rev. 201007
8
2.5 Area Equipment
Secure the pipe with clamps, vises, chains or straps.
Ensure that both sides of the pipe at the cut site is fully supported so that the pipe will
not move after the cut is completed. Long lengths of pipe may be under load and the
separation of the pipe can release pressure. This pressure can cause both sides of the
pipe to move.
2.6 Tool Care
Keep tools in good operating condition.
Do not use damaged tools. Always check your tools for damage especially if a tool has
malfunctioned, been dropped or hit, check it for damage.
Before you start operating the equipment, do no-load tests and feed function checks.
2.7 Tool Use
Use the right tool and tool bit for the job. Contact Tri Tool to help with your application.
Keep the tool bits fully engaged in the tool bit holders. Loose bits are sharp and can
cause cuts or punctures.
Disconnect power supply before installation, maintenance, and repair. Use all ‘Stop’ or
Shuto󰀨’featuresavailablewhenchangingoradjustingtoolbits,maintainingthetool,or
when the tool is not in use.
Remove adjusting keys and wrenches before applying power to the equipment. Check
the tool before turning it on to make sure that all keys and wrenches have been
removed.
Do not force tools. Tools and tool bits function better and safer when used at the
recommended speeds.
Do not reach into rotating equipment.
Do not reach into the rotating head stock to remove chips, to make adjustments, or to
checkthesurfacenish.
WARNING
WARNING: Caster wheels should be blocked when unit is on sloped or uneven
surfaces or scaffolding.

765RVC2 Hydraulic Power Supply
92-1870 Rev. 201007 9
Handle chips with care. Chips have very sharp edges and are hot. Do not try to pull chips
apart with bare hands.
Store tools properly. Disconnect tools from the power source, remove the tool bits, and
store in a safe place.

TRI TOOL INC.
92-1870 Rev. 201007
10
3. GENERAL DESCRIPTION
3.1 DESCRIPTION
TheModel765RVC2(P/N01-2216C)RemoteVolumeControlHydraulicPowerSupply
isavariable-volume,0(0L/s)to15(.94L/s)gpm,pressure-responsive,0(0kPa)to
1800psi(124.1Bar),reversible-owpowerunit.
TheModel765RVC2supplieshydraulicpowertocuttingandweldendpreparationpipe
lathes with integral hydraulic motors.
Althoughthepumpcapacityis0gpm(0L/s)to22gpm(10L/s),operatingpressure
mustbelimitedto1000psi(68.9Bar)atowsover15gpm(.94L/s)toavoidoverloading
the motor.
The Hydraulic pump has a cross port pressure relief set at 1800 psi (124.1 Bar).
ThePendantprovidesstart,stop,emergencystop,volumecontrol,andforward/neutral/
reverseowdirectioncontrol.
The Pendant allows operation up to 200’ (61 m) away from the power supply by addition
of a Pendant Extension Cable and Hydraulic Hoses.
For portability, the power supply is integrated into a cart frame with casters. The unit
can be lifted with the four lifting eyes at each corner of the top of the frame.
MODEL DESIGNATIONS
P/N with Kit No. Input Voltage
01-2216C
05-1376 480VAC
05-1377 240/208VAC
3.2 INTENDED USE
This equipment is intended for professional use.
The equipment is intended to be used by a person with knowledge and experience in
the use of a machine of its type, without limitations in the physical abilities of the upper
limbs and without visual impairment.
The machine is intended to be used with the operator in the upright position while
operating the Hydraulic pump and in a variety of stances as required by the application
while using the remote pendant.
3.3 REASONABLY FORESEEABLE MISUSE
The765RVC2canbeliftedbythefourliftingeyes,orbyaforkliftbythebottomofthe
frame.
Donotallowpersonneltostandunderthe765RVC2whenitislifted.

765RVC2 Hydraulic Power Supply
92-1870 Rev. 201007 11
3.4 TRAINING LEVELS
3.4.1 OPERATORS
Operators must be familiar with industry standard practices and must have read all
manuals associated with this product, Operators may also be expected to do routine
maintenance as instructed in the user manual.
3.4.2 MAINTENANCE PERSONNEL/TECHNICIANS
All personnel recognized as appropriate to access the enclosures of the system for
repair purposes (i.e. removing, adding or modifying components) will have undergone
training by Tri Tool personnel. Such personnel will be familiarized with electrical
safetyandfailurepreventionproceduresspecictothisequipment.
3.4.3 GENERAL PUBLIC/BYSTANDERS
Those in the vicinity of the operation of the system must be aware of appropriate
safety precautions such, as Personal Protection Equipment (PPE) for the work
environment.
3.5 EC DECLARATION OF CONFORMITY
See next page.

TRI TOOL INC.
92-1870 Rev. 201007
12
EC Declaraon of Conformity
We Tri Tool Inc. of 3041 Sunrise Blvd, Rancho Cordova, CA 95742 USA; in accordance with the Machinery
Direcve: 2006/42/EC, and EMC 2014/30/EU Direcve hereby declare that the Tri Tool 765RVC2 Portable
Hydraulic Power Supply is in conformity with the applicable requirements of the following documents:
• Safety of Machinery – General Principles for Design: EN ISO 12100 (2010)
• EN 60204-1: 2010, “Safety of machinery – Electrical equipment of machines – Part 1: General
requirements
• EN ISO 4413:2010, “Hydraulic uid power – General rules and safety requirements for systems and
their components
• EN 809:2010, “Pumps and pump units for liquids – Common safety requirements”
• Industrial, Scienc and Medical (ISM) Radio-Frequency Equipment-Electromagnec Distur-
bance Characteriscs-Limits and Methods of Measurement: EN60034-1 : 2010, EN55011 : 2009 +
A1:2010
• Reference TUV le number 31670837.001, and EMC le number 31661037.001 for tesng details.
Note:
If technical or operaonal modicaons are make without the Tri Tool’s agreement, this declaraon is
invalid.
I hereby declare that the equipment named above has been designed to comply with the relevent secons
of the above referenced specicaons and is in accordance with the requirements of the Machinery Direc-
ve: 2006/42/EC.
Signed by: ________________________________________________ Date:
Sco Stanton
Technical Director
Tri Tool Inc.
3041 Sunrise Blvd
Rancho Cordova, CA 95742
USA
The product technical le is available from Tri Tool Distributor in Europe, Authorized rep:
Doceupoint Ltd.
The Old Methodist Chapel
Great Hucklow, Buxton, Derbyshire
SK17 8RG, UK

765RVC2 Hydraulic Power Supply
92-1870 Rev. 201007 13
4. SPECIFICATIONS
4.1 PHYSICAL PARAMETERS
Weight (Approx.) 880 lbs. (399 kg) with oil
     750lbs.(340kg)withoutoil
  PowerRequirements:15hp,3phase,480VAC,50/60Hz,20Amps
     15hp,3phase,240VAC,50/60Hz,40Amps
For safety, the supply conductor overcurrent protection device must
be provided by the end use facility. Sizing of the device should be in
accordance with the electrical codes and should protect the supply wiring.
Operation Environment:
Ambient Air
Temperature 0° F (-17.8° C) to +120° F (+48.9° C)
Relative Humidity 10% to 90%
Ingress Protection
Rating IP55
4.2 ELECTRICAL CONTROL FEATURES
TheMagneticstarterhasa24VDCstartingcoilandanOverload
Protection Circuit Breaker.
The unit is controlled with a remote Pendant, which provides Emergency
Stop(E-Stop),Stop/Startfunctions,VariableVolumeControl,anda
Forward/Neutral/ReverseControl.
• Ifthepowersupplyhasbeenshut-o󰀨withtheStopButtonorthe
EmergencyStop,theVariableVolumeControlmustbereturnedto
zero and the direction knob returned to the Stop position before the
unit can be started.
• ThePendantissuppliedwitha25’(7.6m)cablethatconnectstothe
Control Box.
• The addition of extension cables will add up to 200’ (61 m).
4.3 HYDRAULIC CHARACTERISTICS
VariableVolume:0gpm(0L/s)to15gpm(.94L/s)
Operationbelow3gpm(.2L/s)isnotrecommended.
Thepumpcapacityisactually0gpm(0L/s)to22gpm(10L/s),however,
operatingpressuremustbelimitedto1000psi(68.9Bar)atowover15
gpm(.94L/s)toavoidoverloadingthemotor.

TRI TOOL INC.
92-1870 Rev. 201007
14
Volume Control: Pendant rheostat with the integrated Electric Displacement
Control (EDC) Pump.
Pressure
0 psi (0 kPa) to 1800 psi (124.1 bar) forward.
0 psi (0 kPa) to 1800 psi (124.1 bar) reverse.
The system is a closed loop.
 Afullowreturn“loop”9-micronlterpreventscontaminationfrom 
circulating through the pump.
The Filter Assembly incorporates a visual Filter Clogging Indicator.
The tank suction line contains a 100-micron suction strainer with 3 psi (.2
bar) relief.
Cooling
 A24VDCaircooledheatexchangerautomaticallyturnsonwiththestartof
 theelectricmotor.Ahotoilshuttlevalveushesoilfromtheclosedcircuitlow
pressure side and through the heat exchanger. Gloves and PPE are required.
Hydraulic Reservoir
The reservoir has a capacity of 18 gal (68 L).
The reservoir includes a level and a temperature gauge
4.4 HYDRAULIC FLUID COMPATIBILITY
 Thesystemrequiresapetroleum-basedhydraulicuid.
 Ethyleneglycol/waterbaseduidsmayalsobeused.However,itis 
recommended that you contact Tri Tool for important operating information.

765RVC2 Hydraulic Power Supply
92-1870 Rev. 201007 15
4.5 ENVELOPE DRAWINGS
Figure 3: Envelope Drawing
37.6in
954.1mm
27.0in
685.8mm
40.5in
1028.7mm
35.2in
893.6mm
7.2in
182.4mm
4X
.94in
23.8mm

TRI TOOL INC.
92-1870 Rev. 201007
16
5. HYDRAULIC SCHEMATIC
Forward
Female QD
Reverse
Male QD
Forward
Reverse
Forward
Reverse
3 Phase 15Hp
Electric Motor
CW Rotation
18 Gallon
(68 l)
Reservoir
On/Off
Valve
Case Drain
Cross Port Relief
QD Manifold
Suction
Filter
Pressure
Filter
9µm
A
C1
B
C2 H
JI
G
A
C54-0305
B54-0305
D
LFV
OUT
53-0449
SG2
SG1
CHG
G
24VDC
5.3A
Heat
Exhanger

765RVC2 Hydraulic Power Supply
92-1870 Rev. 201007 17
6. SYSTEM SCHEMATICS
PROPRIETARY PROPERTY OF TRI TOOL INC.
COMPANY CONFIDENTIAL
APPROVED
DATE
DESCRIPTION
REV.
REVISIONS
REV.
SHT
DWG. NO.
FINISH
MATERIAL
NEXT ASSY USED ON DO NOT SCALE DRAWING
CONTRACT NO.
OF
B
B.O.M.
N/A
CAD
MODEL:
PE8
79-0378
79-0378
79-0378-3.DWG
3
3 4
N/A
A.CURTIS 5/4/17
765RVC
SEE PAGE 1
FUSES:
CAV084A1
CAV042A2
OL1
INTERNAL WIRING
EXTERNAL WIRING
TERMINAL BLOCKS LOCATED IN THE MAIN
CONTROL PANEL
ALL WIRE 18AWG UNLESS OTHERWISE SPECIFIED
A
A
PROPRIETARY PROPERTY OF TRI TOOL INC.
NO REPRODUCTION,USE,OR DUPLICATION OF THE
DESIGNS SHOWN HEREON IS PERMITTED WITHOUT
EXPRESS WRITTEN CONSENT FROM TRI TOOL INC.
COMPANY CONFIDENTIAL
3041SUNRISEBLVD.,RANCHOCORDOVA,CA95742
COPYRIGHT TRI TOOL INC.
AVAILABLE
CAD
SHEET
SCALE
3041SUNRISEBLVD.,RANCHOCORDOVA,CA95742
APPROVED
DATE
DESCRIPTION
REV.
REVISIONS
REV.
SHT
DWG. NO.
FINISH
MATERIAL
NEXT ASSY USED ON DO NOT SCALE DRAWING
ISSUED
CHECKED
DRAWN
DATE
APPROVALS
CONTRACT NO.
REV.
DWG. NO.
SIZE
TRI TOOL INC
OF
B
B.O.M.
N/A
CAD
MODEL:
PE8
CONTROLPANEL,RVC2
79-0378
79-0378
79-0378-3.DWG
3
3 4
N/A
A.CURTIS 5/4/17
765RVC
SEE PAGE 1
FUSES:
1A480VAC
2A240VAC
OL1
INTERNAL WIRING
EXTERNAL WIRING
TERMINAL BLOCKS LOCATED IN THE MAIN
CONTROL PANEL
ALL WIRE 18AWG UNLESS OTHERWISE SPECIFIED
A
A

TRI TOOL INC.
92-1870 Rev. 201007
18
PROPRIETARY PROPERTY OF TRI TOOL INC.
NO REPRODUCTION,USE,OR DUPLICATION OF THE
DESIGNS SHOWN HEREON IS PERMITTED WITHOUT
EXPRESS WRITTEN CONSENT FROM TRI TOOL INC.
COMPANY CONFIDENTIAL
3041SUNRISEBLVD.,RANCHOCORDOVA,CA95742
COPYRIGHT TRI TOOL INC.
AVAILABLE
CAD
SHEET
SCALE
3041SUNRISEBLVD.,RANCHOCORDOVA,CA95742
APPROVED
DATE
DESCRIPTION
REV.
REVISIONS
REV.
SHT
DWG. NO.
FINISH
MATERIAL
NEXT ASSY USED ON DO NOT SCALE DRAWING
ISSUED
CHECKED
DRAWN
DATE
APPROVALS
CONTRACT NO.
REV.
DWG. NO.
SIZE
TRI TOOL INC
OF
B
B.O.M.
N/A
CAD
MODEL:
PE8
CONTROLPANEL,RVC2
79-0378
79-0378
79-0378-3.DWG
3
3 4
N/A
A.CURTIS 5/4/17
765RVC
SEE PAGE 1
FUSES:
1A480VAC
2A240VAC
OL1
INTERNAL WIRING
EXTERNAL WIRING
TERMINAL BLOCKS LOCATED IN THE MAIN
CONTROL PANEL
ALL WIRE 18AWG UNLESS OTHERWISE SPECIFIED
A
A
PROPRIETARY PROPERTY OF TRI TOOL INC.
NO REPRODUCTION,USE,OR DUPLICATION OF THE
DESIGNS SHOWN HEREON IS PERMITTED WITHOUT
EXPRESS WRITTEN CONSENT FROM TRI TOOL INC.
COMPANY CONFIDENTIAL
3041SUNRISEBLVD.,RANCHOCORDOVA,CA95742
COPYRIGHT TRI TOOL INC.
AVAILABLE
CAD
SHEET
SCALE
3041SUNRISEBLVD.,RANCHOCORDOVA,CA95742
APPROVED
DATE
DESCRIPTION
REV.
REVISIONS
REV.
SHT
DWG. NO.
FINISH
MATERIAL
NEXT ASSY USED ON DO NOT SCALE DRAWING
ISSUED
CHECKED
DRAWN
DATE
APPROVALS
CONTRACT NO.
REV.
DWG. NO.
SIZE
TRI TOOL INC
OF
B
B.O.M.
N/A
CAD
MODEL:
PE8
CONTROLPANEL,RVC2
79-0378
79-0378
79-0378-3.DWG
3
3 4
N/A
A.CURTIS 5/4/17
765RVC
SEE PAGE 1
FUSES:
1A480VAC
2A240VAC
OL1
INTERNAL WIRING
EXTERNAL WIRING
TERMINAL BLOCKS LOCATED IN THE MAIN
CONTROL PANEL
ALL WIRE 18AWG UNLESS OTHERWISE SPECIFIED
A
A