Triangle Lights LED PAR64 18W 6CH LCD Sound User manual

www.storexp.com
[email protected]
LED PAR64 18W 6CH LCD SOUND
USER MANUAL
1 Specifications
Number of LEDs 18X1W LED

R:6, G:6, B:6

Power Consumption 30W
Beam angle 25°
Projecting distance 15M
LED Lumen
LED Expected Life 80,000 hours
Control system DMX 512
DMX Channel 6 Channels
Connection 3 pins XLR-sockets
Input Voltage 100V~256VAC
Operating Voltage 24VDC
LED Current 320mA ±5%
Operating temperature -18°C ~ +40°C (0°F ~ +104°F)
Storage temperature +5°C ~ +30°C (41°F ~ +86°F)
Dimension L22*W19*H16CM
Package Dimension 20X20X27CM
Housing PLASTIC
Gross Weight 2.0kgs±5%

www.storexp.com
[email protected]
2 Control Modes
Stand Alone Mode
Select effects using the LCD panel
DMX International standard DMX512 signal control
Sound Active Light effects change to music
Master/Slave Mode
Auto Mode
3 LCD Control Panel
1- Menu Push button to return to the Main menu. This is NOT a menu browsing button. Push this
button ONCE and you should have reached the main menu. The RED Dot at the lower left corner of
the screen is on. Now use Up/Down to navigate through the menu options. See below for details.
2- ESC this is in fact an ENTER button, to enter sub menu, or to confirm settings.
3- Page Up Use this button to navigate or set value when you have navigated to the right screen.
4- Page Down Use this button to navigate or set value when you have navigated to the right screen.
Example: set the address to 017 for this light.
1, Push Menu to make sure you are in the main menu.
2, Push Page Up/Down until you find ADDR, Push ESC to get in
3, Use Page Up/Down to set the address to A017, then push ESC

www.storexp.com
[email protected]
4 LCD Control in Details
Main and Sub Level Menus are shown below:
Main
Menu Sub Menu Description
ADDR A001-A512 DMX address setting
RL - - RL00-RL12 Red Dimmer
Green and Blue color are not affected, and can stay on
GL - - GL00-GL12 Green Dimmer
Red and Blue color are not affected, and can stay on
BL - - BL00-BL12 Blue Dimmer
Red and Green color are not affected, and can stay on
FLAS FL00-FL12 RGB Chasing Effect
Chasing speed increases from 0 to 12.
FADE FA00-FA12 RGB Fading Effect
Fading speed increases from 0 to 12.
ACS - AS00-AS12 RGB Color Changing Effect
changing speed increases from 0 to 12.
SOUA Sound Active Mode with Color Changing Effect
Tune the Mic Knob for correct level of Mic sensitivity
SOUF SoundActive Mode with Color Chasing Effect
Tune the Mic Knob for correct level of Mic sensitivity

www.storexp.com
[email protected]
5 DMX CHART
Channel No. DMX Value Description
1 0~255 Master Dimmer
Must be on for CH2,3,4 and 5 to work
2 0~255 Red Dimmer
CH1 must be on
3 0~255 Green Dimmer
CH1 must be on
4 0~255 Blue Dimmer
CH1 must be on
5 0~255 Master Strobe
Ch1 and at least one of CH2,3 and 4 should be on to work
0~70 Color Macro
6 71~255 RGB Fast Color Changing.
Changing speed will increase as dmx value increases
6 Warning
This fixture is not waterproof and not to be used outdoor unless tended all time.
7 Trouble-Shooting
3 of the leds are not working when I received the lights.
Leds are soldered to the led board and they work in sets of 3. If one solder point get loosen due to impacts in
transit, it will bring down the other two in the group. Fixing this is easy if you have a solder iron.
Open the case, locate the 3 leds that are not working, and go to the other side of the led board where you
see the connections.
Plug and light in, and touch/press the connection for each of the 3 leds with your finger, and see if the 3 leds
light up.
The one that lights up all 3 leds is the connection that needs to be soldered. Youtube guide on how to
correctly solder can be found here: http://www.youtube.com/watch?v=MHNDa2Wvk8I
8 Errors/Mistakes and Recommendations
Please write me at [e-mail] for any errors/mistakes, or improvements that
you think would make it a better manual.
We appreciate your help and will offer discounts for your next purchase depending on

www.storexp.com
[email protected]
how much you contribute.