Triarch 29229 User manual

ASSEMBLY INSTRUCTIONS FOR 29229
Frame
Cap
Fixture loop
1. Before beginning the assembly, carefully unpack and identify all parts referring to the illustration.
2. Unravel the supply power and ground wires and pass through the center hole of fixture loop.
3. Carefully place cap over protruding nipple, and secure with the fixture loop (Note: Attach the lead
wire to fixture loop with bare copper thread in the packet).
4. Install a proper bulb (not provided) to the socket referring to the markings and labels on fixture for
maximum wattage.
5. Restore power to the installation point ON. Retain this sheet for future reference.
01.27
IF IN DOUBT ABOUT ELECTRICAL INSTALLATION,
CONSULT A LICENSED ELECTRICIAN!