Triax PtP 1080P User manual

HDMI Extender over Cat5e/6
1
PtP 1080P
HDMI Extender over
Cat5e/6
Product Code : 310072
User Manua

HDMI Extender over Cat5e/6
2
Statement
Thank you for purchasing this product, please read the user manual
carefully before use. We reserve the right to make changes to the
product without notice.
Safety Precaution
 Do not dismantle the housing or modify the module to avoid electrical
shocks.
 Using parts not meeting the products' specifications may cause
damage, deterioration or malfunction.
 Do not expose the unit to rain, moisture or install this product near
water.
 nstall the device in a place with good ventilation.
 Do not twist or pull by force the ends of the cable. t can cause
damage.
 Do not use liquid or aerosol cleaners to clean this unit.
 Always unplug the power to the device before cleaning.
 Unplug the power when not used for a long period of time.
 Refer all servicing to qualified service personnel.
After-sa es
Please contact your point of purchase for details of the warranty
supplied.

HDMI Extender over Cat5e/6
3
Introduction
The PtP 1080P extends HDM signal between Transmitter and Receiver
over CATx cable. t supports 1080p@60Hz video signals up to 55m
including embedded multi-channel audio and HDCP 1.4.
Built-in ED D make this product compatible with most display and source
devices, to ensure HDM transmission.
Advanced power design (PoC) allows this product to be powered at
Transmitter, and only one power supply is required. n addition, the PtP
1080P sends/receives R signals over the same CATx cable with R
pass through.
Features
 Supports HDM 1.3, HDCP 1.4 compliant
 Supports built-in ED D to ensure HDM signals transmission from
source to display
 The transmission of 1080p@60Hz (max) signal is up to 55m
 Supports bidirectional R pass-through
 Supports PoC, the Receiver can be powered via Transmitter
Package Contents
 1 x PtP1080P Transmitter  1 x Receiver
 1 x Power Adaptor (5V DC 1A)  2 x Velcro Tape
 1 x R Receiver (5V)  1 x R Emitter (5V)
 1 x User Manual

HDMI Extender over Cat5e/6
4
Pane Description
Transmitter (TX)
① CAT OUT: RJ45 connector with Green& Yellow indicators. Connect to
Receiver over CATx cable.
The Green indicator lights up when powered on.
The Yellow indicator lights up when linked successfully between
Transmitter and Receiver.
② R N: Connect with R Receiver.
③ R OUT: Connect with R Emitter.
④ DC 5V: Micro USB, connect to the power adaptor.
⑤ HDM N: Connect to HDM source.
⑥ HDM OUT: HDM loop output, connect to display.
⑦ RESET: Reboot.
Receiver (RX)
① CAT N: RJ45 connector with Green& Yellow indicators. Connect to
Transmitter over CATx cable.
② R N: Connect with R Receiver.
HD M OUT
HD M N
DC 5V
R O UT
R N
CAT OUT
R ESET
1
2
3
4
5
6
7
EQ SET T NG
R O UT
R N
C AT N
1
2
3
4
5
HDM OUT

HDMI Extender over Cat5e/6
5
③ R OUT: Connect with R Emitter.
④ HDM OUT: Connect to display.
⑤ EQ SETT NG: After the system is connected, press this button three
to six times repeatedly for the best output image. When the cable,
source or display is changed, or the output resolution is reset, you
need to press this button again repeatedly to ensure the best image.
Specifications
Transmitter Receiver
nput (1) HDM (1) CAT
nput Connector (1) 19-pin type-A female
HDM (1) RJ45
Output (1) HDM ; (1) CAT (1) HDM
Output Connector (1) 19-pin type-A female
HDM ; (1) RJ45
(1) 19-pin type-A
female HDM
Control (1) R N; (1) R OUT (1) R N; (1) R
OUT
Control
Connector (2) 3.5mm mini jacks (2) 3.5mm mini jacks
General
Transmission
Distance 1080p@60Hz≤55m
HDM Standard HDM 1.3, HDCP 1.4 compliant
ED D
Management Built-in ED D

HDMI Extender over Cat5e/6
6
Power Supply nput: 100VAC~240VAC, 50/60Hz; Output:
5VDC 1A
Power
Consumption 4W (Max)
Work
Temperature -10~55℃
Relative Humility 10%-90%
Dimensions
(W*H*D) 66mm x 16.8 mm x66 mm
Weight Transmitter: 36g; Receiver: 38g;
Connection Diagram
DC 5V
Dis playDVD
R Emitt er
R Rece iver Proj ector Remote R Recei ver DV D Remote
R Emitter
P roje ct or
PoC
P :
ower
R:
HDM:
Cat x
:
1080P 55m