Triax 310073 User manual

PtP 4K
4K HDMI Extender
Product Code : 310073
User Manual

4K HDMI Extender
1
Statement
Please read this user manual carefully before use. Pictures shown in this manual are for reference only.
This manual is only for operation instruction, please contact the local distributor for maintenance
assistance. We reser e the right to make changes to the product without notice. Please refer to your
point of purchase for the latest details.
Safety Precaution
To ensure the best performance from the product, please read all instructions carefully before using the
de ice. Sa e this manual for future reference.
 Follow basic safety precautions to reduce the risk of fire, electrical shock and injury.
 Do not dismantle the housing or modify the module.
 Using parts not meeting the products’ specifications may cause damage, deterioration or malfunction.
 Do not expose the unit to rain, moisture or install this product near water.
 Install the de ice in a place with good entilation.
 Do not twist or pull by force ends of the CAT5e/CAT6a cable. It can damage the product.
 Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the de ice before
cleaning.
 Unplug the power cord when left unused for a long period of time.
 Refer all ser icing to qualified ser ice personnel.
After-sales
Please contact your point of purchase for details of the warranty supplied.
Introduction
Thank you for choosing the PtP 4K extender kit which consists of a transmitter (Tx) and a recei er (Rx).
You can extend a 4K@60Hz 4:4:4 HDMI signal to distance up to 131ft/40m and 1080P@60Hz up to
230ft/70m o er a single CATx Ethernet cable. It supports bi-directional 24V Power o er Cable (PoC),
which simplifies the wiring to allow only a single AC power adapter to be used. It supports bi-directional
IR pass-through extension, allowing control of local ideo source de ice. It also supports CEC pass-
through. It uses a isually lossless ideo compression technology (VLC) to ensure HD lossless
transmission of 4K@60Hz 4:4:4.
Features
 HDMI 2.0 standard and HDCP 2.2 compliant
 Supports ideo resolution up to 4Kx2K@60Hz 4:4:4
 Transmission distance is up to 131ft/40m for 4Kx2K, and 230ft/70m for 1080P
 Supports bi-directional IR pass-through for long-distance control
 Supports bi-directional 24V PoC

4K HDMI Extender
 Supports CEC
 Visually Lossless Compression (VLC) technology
Products included
 1x Transmitter (TX)  1x Recei er (RX)
 2x TX Mounting Ears with 2 Screws  2x RX Mounting Ears with 2 Screws
 4x TX Plastic Cushions  4x RX Plastic Cushions
 1x Power Adaptor (24V DC, 1.25A)  1x User Manual
Transmitter Panel Description
No. Name Description
① HDMI In Type-A HDMI port to connect the source de ice (e.g. Blu-ray DVD).
② IR IN 3.5mm jack to connect an IR recei er (not included).
③ IR OUT 3.5mm jack to connect an IR emitter (not included).
④ HDBT Out
RJ45 connector for a CATx Ethernet cable to connect the transmitter and
the recei er. The LINK LED illuminates when there is a alid HDBaseT™
link between the transmitter and the recei er. The HDCP LED illuminates
when the ideo contains HDCP content.
⑤ Power LED Illuminates red when power is applied.
⑥ DC 24V DC barrel connector to connect the AC power adapter.
IR Out
IR In
HDMI In
DC 24V
HDBT Out
1
3
4
5
6

4K HDMI Extender
3
Receiver Panel Description
No. Name Description
① HDMI Out Type-A HDMI port to connect an HDMI display.
② IR IN 3.5mm jack to connect an IR recei er (not included).
③ IR OUT 3.5mm jack to connect an IR emitter (not included).
④ HDBT In
RJ45 connector for a CATx Ethernet cable to connect the transmitter and
the recei er. The LINK LED illuminates when there is a alid HDBaseT™
link between the transmitter and the recei er. The HDCP LED illuminates
when the ideo contains HDCP content.
⑤ Power LED Illuminates red when power is applied.
⑥ DC 24V DC barrel connector to connect the AC power adapter.
System Diagram
Note: This picture is for reference only. The specific scheme is subject to equipment connected.
IR Out
IR In
HDMI Out
DC 24V
HDBT In
1
3
4
5
6
DisplayBlu-Ray DVD
IR
Emitter
IR Recei er
Display Remote
IR:
HDMI:
HDBaseT:
RS232:
1080P 70m
4K 40m
IR
Emitter
IR Recei er
Blu-Ray Remote
Transmitter (TX) Recei er R
( X)

4K HDMI Extender
4
Specification
Transmitter (Tx)
Input (1) HDMI
Input Connector (1) Female type-A HDMI
Output (1) HDBT
Output Connector (1) RJ45
Control (1) IR IN, (1) IR OUT
Control Connector (2) 3.5mm mini jacks
Receiver (Rx)
Input (1) HDBT
Input Connector (1) RJ45
Output (1) HDMI
Output Connector (1) Female type-A HDMI
Control (1) IR IN, (1) IR OUT
Control Connector (2) 3.5mm mini jacks
General
Video Resolution Up to 4Kx2K@60Hz 4:4:4
Transmission Mode HDBaseT
Transmission Distance 1080P@60Hz ≤ 230ft/70m,
4K@60Hz ≤131ft/40m
HDMI Version 2.0
HDCP Version 2.2
Bandwidth 18Gbps
Power Consumption 9.5W (Max)
Operating Temperature -10℃ ~ +55℃
Storage Temperature -25℃ ~ +70℃
Relati e Humidity 10%-90%
Power Supply Input Power: 24V DC 1.25A or Power o er Cable (PoC)，
AC Adaptor Input Power: 100~240VAC, 50/60Hz
Dimension (W*H*D) 74mm x 18mm x 120mm
Net Weight (g) Tx/Rx:235g