Tribesigns TH-SF0014 User manual
Assembly Instructions
(PLEASE READ CAREFULLY BEFORE ASSEMBLY)
TABLE LAMP SKU# TH-SF0014
IMPORTANT SAFETY INSTRUCTIONS
WARNING! TO REDUCE THE RISK OF FIRE,
ELECTRIC SHOCK OR PERSONAL INJURY.
-
Turn off/unplug and allow to cool before replacing bulb,
cleaning or other maintenance.
-
Bulb gets HOT quickly! Touch only switch/plug
when turning on.
-
Do not remain in light if skin feels warm.
-
Do not look directly at lighted bulb.
-
Keep lamp away from materials that may burn.
-
Use only with 60W or smaller Type A bulb or
a 13W self-ballasted bulb or a 6W LED bulb.
-
Do not touch bulb at any time.
ASSEMBLY INSTRUCTIONS
1.
Lay out all parts on smooth surface as shown in illustration.
2.
Stitch the lampshade along the veicro.
3.
Fit the harp (D) onto the prop (E）.
4.
Unscrew finial (A) from harp (D), fit the shade (B) onto the harp (D),
Then screw the finial (A) into the top of the harp (D) and tighten.
5.
Screw in a 6 Watt LED bulb(C) (bulb included) onto socket.
6.
Plug into outlet and turn on the touch 3-way switch and enjoy.
7.
Built in dual 5V/2A USB ports and an outlet on the light base.
MAINTENANCE:
Light bulb recommended:
-
To clean use soft cloth only.
-
Do not use any chemical or abrasive cleaners.
-
Indoor Use only.
If you have any question, please feel free to contact us： support@tribesigns.com.
We are happy to provide you assistance.
"SAVE THESE INSTRUCTIONS"
If you have any question, please feel free to contact us： support@tribesigns.com.
