Original BTC Alma User manual

Alma
Instruction Manual
Table Light
MADE IN BRITAIN
ORIGINALBTC.COM
[phone]
UNIT 21 / 22 AVENUE ONE, STATION LANE, WITNEY, OX28 4XZ, ENGLAND
Established in 1990, Original BTC manufactures relaxed, familiar lighting for traditional and
contemporary homes.
All products are hand-assembled in Oxford from high quality components, produced in the UK.
Cleaning and Maintenance
These instructions are provided for your safety in order to prevent the risk of Fire, Electric shock or
Injury. Please retain for future reference. When fitting is in operation, some parts may become hot;
take care when using/handling.
- Ensure the lamp type and max wattage is followed- do not exceed. Take care not to overtighten
lamp.
- Do not touch the lamp or lamp holder while in operation, as both may become hot.
- Turn off and unplug fitting, leaving lamp to cool before changing lamp. Dispose of old lamps
carefully.
- Adjust light fitting only when power to the fitting is off and has been left to cool.
- Never leave a fitting without a lamp in position.
- Keep light fitting away from combustible materials such as soft furnishings.
- Ensure children do not play with the light fitting.
- Ensure the light is positioned on a solid, level and non-slip surface and make sure the position of
the cable does not pose a trip hazard.
- If the external flexible cable or cord of this luminaire is damaged, it shall exclusively be replaced by
the manufacturer or his service agent, or a similar qualified person, in order to avoid a hazard.
- For use in a dry, indoor environment only. Ensure the fitting does not come into contact with any
liquids.
All brass components can be cleaned with a metal polish to remove tarnishing with the exception of
the flexible arm. Do not use polishes or abrasives on the flexible arm as this may
compromise the fittings ability to maintain its shade position. Bone china can be cleaned
by hand, with a soft damp cloth with a diluted, mild detergent (nonabrasive) if necessary. Switch off
power to the fitting before cleaning.
When handling the light, always support from below - do not lift from the bone china shade.
!
FT701N/R/G
Safety & Installation Instructions

Alma Table Light
FT701N Alma Table Light Natural
FT701R Alma Table Light Coral
FT701 G Alma Table Light Seaweed
230V ac 50Hz IP20
* Wattage value provided as a guide to suitable lamps. Lower wattage than stated may be used.
** Dimming performance dependant upon lamp used. For lamp recommendations contact seller or local BTC sales office.
GLSE27
LAMP GUIDANCE : NB Lamp Not Included
TYPE WATTAGE* BASE SHAPE
Bone China shade installation v1.2-08.22
Lamp Not Included
LED** 6W (recommended)
Incandescent 40W Max
21 4
3
5
Contents
Contents
1
2
3
4
5
Main body
Shade
1x Plastic shade ring
2x Brass shade ring
1x Brass shade disc
LAMP NOT INCLUDED
1
3
2
4
5
4
A.
PLEASE READ THE INSTRUCTIONS ON THE REVERSE BEFORE YOU BEGIN INSTALLING YOUR LIGHT
- Install the shade (2) onto the main body (1) using the plastic shade ring (3) as a spacer and secure using one of the brass
shade rings (4).
- Install the shade disk (5) using the two remaining brass shade rings (4) to hold in place (see Diagram C for details).
Refer to the diagrams on opposite page and read Safety and Installation instructions overleaf.
Take care when handling ceramic products during installation.