Tridonic sceneCOM S User manual

Sensors and Controls
sceneCOM S
Manual

Manual sceneCOM S | 11-2019 | 1.0 | en
Table of Contents
c2 / 18
...
1. Validity 3
1.1. Copyright . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1.2. Imprint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2. Safety instructions 4
2.1. Intended use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.2. Dangers associated with the operation of the system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
3. The sceneCOM S system 6
3.1. General information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
3.2. System components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
3.3. sceneCOM S solution schematic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
3.4. Connection diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
3.5. Wiring type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
3.6. Wireless signal range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
3.7. Placement and mounting of sceneCOM S . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
4. Applications overview 12
4.1. Individual office (cabinet type) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
4.2. Open plan office . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
4.3. Meeting / conference room . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
4.4. Classroom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
4.5. Warehouse / DIY shop (between shelf lighting control) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
4.6. Industrial midrack small area applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Manual sceneCOM S | 11-2019 | 1.0 | en
Scope of documentation
c3 / 18
This operating instruction is valid for the sceneCOM S system.
TRIDONIC GmbH & Co KG is constantly striving to develop all its products. This means that there may be changes in form, equipment
and technology.
Claims cannot therefore be made on the basis of information, diagrams or descriptions in these instructions.
The latest version of these operating instructions is available on our home page at
http://www.tridonic.com/com/en/operating-instructions.asp
1.1. Copyright
This documentation may not be changed, expanded, copied or passed to third parties without the prior written agreement of
TRIDONIC GmbH & Co KG.
We are always open to comments, corrections and requests. Please send them to [email protected]
1.2. Imprint
Tridonic GmbH & Co KG
Färbergasse 15
6851 Dornbirn
Austria
T [phone]
F [phone]
www.tridonic.com
...

Manual sceneCOM S | 11-2019 | 1.0 | en
Safety instructions
c4 / 18
The instructions in this section have been compiled to ensure that operators and users of the sceneCOM S system from Tridonic are
able to detect potential risks in good time and take the necessary preventative measures.
The operator must ensure that all users fully understand these instructions and adhere to them. This device may only be installed and
configured by suitably qualified personnel.
2.1. Intended use
2.1.1. Proper use
DALI-2 monitoring and control solution. DALI-2 devices can be configured locally via Bluetooth connection and app.
The device may only be used for this intended purpose.
2.1.2. Improper use
Outdoor use. Extensions and modifications to the product.
2.2. Dangers associated with the operation of the system
½WARNING!
Improper use could result in injury, malfunction or damage to property.
It must be ensured that the operator informs every user of existing hazards.
½DANGER!
Danger of electrocution
Disconnect the power to the entire lighting system before working on the lighting system!
½CAUTION!
Risk of damage caused by condensation
Prior to commissioning the system, wait until the control device is at room temperature and completely dry!
½CAUTION!
Risk of damage caused by humidity
Only use the control device in dry rooms and protect it against humidity!

Manual sceneCOM S | 11-2019 | 1.0 | en
Safety instructions
c5 / 18
...
½CAUTION!
Electromagnetic compatibility (EMC)
Although the Tridonic control device meets the stringent requirements of the appropriate directives and standards on
electromagnetic compatibility, it could potentially interfere with other devices under certain circumstances!

Manual sceneCOM S | 11-2019 | 1.0 | en
The sceneCOM S system
c6 / 18
3.1. General information
The sceneCOM S system is a DALI-2 monitoring and control solution. DALI-2 devices can be configured locally via Bluetooth
connection and app.
The sceneCOM S can be updated over the air, providing a continuously evolving solution.
3.2. System components
Image Title Description
sceneCOM S DALI Application Controller
MSensor G3 SFI 30
PIR 5DPI WH/BK
...proceed on next page
...
Support for complete Tridonic control gear with DALI and DALI-2, as
well as control gear certified by other brands with DALI and DALI-2
_
Future-proof thanks to simple firmware update via Bluetooth App_
4 independent inputs enabling connection of floating contact, standard
momentary switches
_
Power supply via DALI line_
Sensor developed to work with the latest DALI specification_
Monitoring of ambient light and motion detection_
Remote control interface allowing infrared remote control interaction_
Individual adjustment of the parameters with configuration software_
Power supply via DALI line_
Shutter for preventing movement detection in one direction included_
Small dimensions allowing easy and inconspicuous integration in
luminaries
_
Wide range of accessories allowing extended application range_

Manual sceneCOM S | 11-2019 | 1.0 | en
The sceneCOM S system
c7 / 18
Image Title Description
MSensor G3 SFI 30 PIR
10DPI WH
MSensor G3 SFI 30 PIR
16DPI WH
REMOTECONTOL IR6
The REMOTECONTROL IR6 has a separate documentation:
https://www.tridonic.com/com/en/download/technical/
REMOTECONTROL_IR6_en.pdf
...proceed on next page
...
Sensor developed to work with the latest DALI specification_
Monitoring of ambient light and motion detection_
Remote control interface allowing infrared remote control
interaction
_
Individual adjustment of the parameters with configuration
software
_
Power supply via DALI line_
Shutter for preventing movement detection in one direction
included
_
Small dimensions allowing easy and inconspicuous integration
in luminaries
_
Wide range of accessories allowing extended application range_
Sensor developed to work with the latest DALI specification_
Monitoring of ambient light and motion detection_
Remote control interface allowing infrared remote control
interaction
_
Individual adjustment of the parameters_
Power supply via DALI line_
Mounting ring and gasket included to reach IP65 protection_
Wide range of accessories allowing extended application range_
Double terminals for through wiring_
Optional infra-red remote control_
Switching on and off (On/Off button)_
Dimming (Up/Down button)_
Activation of automatic lighting control (Automatic button)_
Setting the threshold control point (Set button)_

Manual sceneCOM S | 11-2019 | 1.0 | en
The sceneCOM S system
c8 / 18
Image Title Description
DALI-PCD 1-300
one4all G2
LED Drivers All Tridonic Drivers with one4all interface are supported
DALI PS3
...
Digital leading-edge and trailing-edge phase dimmer_
Total connected load: 1 – 300 VA_
one4all input: DALI, DSI, switchDIM and corridorFUNCTION input_
Zero cross switching supported_
1 dimmed phase (output)_
With automatic load detection_
Surface-mounted casing_
Suitable for operation with LED retrofit bulbs_
Best dimming quality from 1 – 100 %_
High efficiency of up to 92 %_
Large number of designs including the new Stretched Compact housing
with attachable cable clamp
_
DALI-2 power supply providing 70 mA for a DALI-2 installation_
Excellent scalability allowing to connect up to 2 PS3 in a DALI-2
installation
_
Compact form factor combined with detachable mounting flaps allowing
high installation flexibility, e.g. in luminaire
_
Up to 100,000 guaranteed operating hours enable outstanding life-time
of the entire lighting system
_

Manual sceneCOM S | 11-2019 | 1.0 | en
The sceneCOM S system
c9 / 18
3.3. sceneCOM S solution schematic
sceneCOM S supports:
3.4. Connection diagram
3.5. Wiring type
Wire length and cross section
In DALI the wire length is limited depending on the cross section and material used. Try to avoid wire length above 300 m in your
DALI installation.
...
single DALI Line (max 250mA):_
up to 64 converters / drivers_
16 groups_
16 scenes_
16 input devices / sensors / push buttons_

Manual sceneCOM S | 11-2019 | 1.0 | en
The sceneCOM S system
c10 / 18
Max. output cable length
Recommended wire length depending on material, ambient temperature and cross section.
Material Cross section Max. cable length
25 °C 50 °C 75 °C
Copper 0.20 mm² 45 m 41 m 37 m
0.50 mm² 112 m 102 m 93 m
0.75 mm² 168 m 153 m 140 m
1.00 mm² 224 m 204 m 187 m
1.50 mm² 300 m (1) 300 m (1) 281 m
Aluminum 0.20 mm² 27 m 25 m 23 m
0.50 mm² 68 m 62 m 57 m
0.75 mm² 102 m 93 m 86 m
1.00 mm² 136 m 125 m 115 m
1.50 mm² 205 m 187 m 172 m
(1) Cable lengths of more than 300 m are not recommended.
...

Manual sceneCOM S | 11-2019 | 1.0 | en
The sceneCOM S system
c11 / 18
3.6. Wireless signal range
Maximum range of the signal provided by the sceneCOM S is up to 20 m. Avoid mounting the device behind glass, concrete surfaces
and in metal enclosures. If mounted behind such materials the signal range will be reduced.
Wireless signals are electromagnetic waves. These waves are damped under the following circumstances:
3.7. Placement and mounting of sceneCOM S
The sceneCOM S DALI-2 application controller has an integrated antenna. Certain materials can reduce the range of the antenna.
During installation, the following should be observed. The antenna is located at the corner of the case, at the bottom of the PCB, just
above the bottom of the device. By placing the antenna at this point, the influence of other components on the antenna performance
is minimized. In addition, the device should be placed as far away as possible from metal structures. Wires of the device should not
lead past the antenna.
The antenna location is the grey area on the graph.
...
Increasing distance between sceneCOM S and your smart device_
Materials of different compositions near the sceneCOM S and your smart device_
Building installations, such as hollow drywall with insulation wool on metal foil, suspended ceilings with metal or carbon fibre
panels, fixtures and furnishings made of steel, glass, lead glass or with metal coating, and metal walls/surfaces
_
Fire protection walls, lift shafts, stairwells and supply areas must be considered completely sealed areas_

Manual sceneCOM S | 11-2019 | 1.0 | en
Applications overview
c12 / 18
The sceneCOM S System can cover all applications where one DALI-2 Line fulfills the requirement.
In the following pages a short overview of different applications is described.
...
Individual office (cabinet type), p. 13_
Open plan office, p. 14_
Meeting / conference room, p. 15_
Classroom, p. 16_
Warehouse / DIY shop (between shelf lighting control), p. 17_
Industrial midrack small area applications, p. 18_

Manual sceneCOM S | 11-2019 | 1.0 | en
Applications overview
c13 / 18
4.1. Individual office (cabinet type)
sceneCOM S MSensor G3
Lowbay
Multi-Sensor
(presence & light)
Presence sensor
(presence only)
DALI PS3 IR6 remote
Basic setup: Advanced setup:
...
On/Off,_
Dim Up/Down,_
Daylight/Presence control,_
Push-button (manual-input)_
IR6 remote_
On/Off,_
Dim Up/Down_
Daylight/Presence_
Push-button (manual-input)_
Direct-Indirect light control_
Only-off function,_
Basic Tunable White_
Grouping_
Scenes_

Manual sceneCOM S | 11-2019 | 1.0 | en
Open plan office
c14 / 18
4.2. Open plan office
sceneCOM S
Multi-master
application
controller
MSensor G3
Lowbay
Multi-Sensor
(presence & light)
Presence sensor
(presence only)
DALI PS3
DALI
Power
supply
DALI XC G3
DALI
Push
button
input
IR6 remote
IR remote
Basic setup: Advanced setup:
*-Single sensor can be applied to multiple groups
** -Single switch can be applied to multiple groups
...
On/Off,_
Dim Up/Down,_
Daylight/Presence control,_
Push-button (manual-input)_
Grouping*_
On/Off,_
Dim Up/Down_
Daylight/Presence_
Push-button (manual-input)_
Direct-Indirec tlight control_
Only-off function,_
Basic Tunable White_
Grouping*_
Scenes**_

Manual sceneCOM S | 11-2019 | 1.0 | en
Meeting / conference room
c15 / 18
4.3. Meeting / conference room
sceneCOM S
Multi-master
application
controller
MSensor G3
Lowbay
Multi-sensor
(presence & light)
Presence sensor
(presence only)
DALI PS3
DALI
Power supply
IR6 remote
IR remote
Basic setup: Advanced setup:
*-Single sensor can be applied to multiple groups
...
On/Off,_
Dim Up/Down,_
Daylight/Presence control,_
Push-button (manual-input)_
Grouping*_
On/Off,_
Dim Up/Down_
Daylight/Presence_
Push-button (manual-input)_
Direct-Indirect light control_
Only-off function,_
Basic Tunable White_
Grouping*_
Scenes*_

Manual sceneCOM S | 11-2019 | 1.0 | en
Meeting / conference room
c16 / 18
4.4. Classroom
sceneCOM S
Multi-master
application
controller
MSensor G3
Lowbay
Multi-sensor
(presence & light)
Presence sensor
(presence only)
DALI PS3
DALI
Power supply
IR6 remote
IR remote
Basic setup: Advanced setup:
*-Single sensor can be applied to multiple groups
** -Single switch can be applied to multiple groups
...
On/Off,_
Dim Up/Down,_
Daylight/Presence control,_
Push-button (manual-input)_
Grouping*_
On/Off,_
Dim Up/Down_
Daylight/Presence_
Push-button (manual-input)_
Only-off function,_
Basic Tunable White_
Grouping*_
Scenes**_

Manual sceneCOM S | 11-2019 | 1.0 | en
Warehouse / DIY shop
c17 / 18
4.5. Warehouse / DIY shop (between shelf lighting control)
sceneCOM S
Multi-master
application
controller
MSensor G3
Lowbay
Multi-Sensor
(presence & light)
Presence sensor
(presence only)
DALI PS3
DALI
Power
supply
DALI XC G3
DALI
Push
button
input
IR6
remote
IR
remote
Basic broadcast setup:
Focus use-case:
Continues presence detection until peoples or machines staying between shelves, racks or production lines, light sensing with the
master-sensor.
Reasonable energy savings around 45 %.
This use-case as well can be relevant for dot-type light sources (e.g. midbay/highbay fixtures)
...
On/Off,_
Dim Up/Down,_
Mainly presence control, light sensing also possible_
Push-button (manual-input)_
Broadcast_
Only-off function_

Manual sceneCOM S | 11-2019 | 1.0 | en
Industrial midrack small area applications
c18 / 18
4.6. Industrial midrack small area applications
Focus use-case:
Areas not continuously occupied with people and machines, light follow you,
Maximal energy savings 80-90 %.
This use-case as well can be relevant for dot-type light sources (e.g.
midbay/highbay fixtures)
Advanced setup:
*-Single sensor can be applied to multiple groups
On/Off,_
Dim Up/Down,_
Mainly presence control,_
Push-button (manual-input)_
Grouping*_
Tunable White_