Trim a Home TY-S3.5-100L User manual

Made in / Hecho en CHINA. Distributed by Kmart Corporation
Hoffman Estates, IL 60179 SHOP kmart.com
For questions or comments about the product:
Email: [email protected] or Call toll-free: 1-855-428-6664
OWNER’S MANUAL
3.5 FT SPIRAL TREE
Product code: 0-03431695-0 (clear), 0-03431698-4 (multi)
UPC code: 029944490883 (clear), 029944491026 (multi)
Date of purchase: _____/ _____/ _____

3.5 FT SPIRAL TREE
ITEM NUMBER: TY-S3.5-100L
A. Star
Qty：1pc
B.SpiralTree
Qty：1pc
C. Plastic Cap
Qty：1pc
D. Pole Section
Qty：2pcs
E. Driving Cap
Qty：1pc
F. Tree Stand
Qty：1pc
ASSEMBLY INSTRUCTIONS
FOR INDOOR USE
STEPS:
(1)Place all the parts flat on a flat surface and make sure you have all the parts listed on the parts list.
(2) The Tree Stand (Part # 6) has a short vertical section. Insert one Pole Section (Part # 4), with the big
end down, (as shown in FIG.1), into the short vertical section on the Tree Stand. Insert the second Pole
Section into the upper end of the first Pole Section.
(3)Attach the Plastic Cap (Part # 3) on the top of the second Pole Section.
(4)Pass the Plastic Cap through the bottom of top hole of the Spiral Tree (Part # 2) and let the Spiral Tree
drape around the Pole Sections.
(5) Attach the Star Tree Topper (Part # 1) into the top of the Plastic Cap.
(6) Insert the hooks at the end of two supporting strings into the metal holes on the two arms of the tree
stand (Fig 2).
(7) Plug in.
FOR OUTDOOR USE
STEPS:
(1) Place all the parts flat on a flat surface and make sure you have all the parts listed on the parts list.
(2) One of the arms of the Tree Stand (Part # 6) is tapered. Drive the sharp arm of the Tree Stand into the
ground using the Driving Cap (Part #5) on the opposite end of the Tree Stand, as shown in (FIG.3). Insert
one Pole Section (Part # 4), with the big end down as shown in (FIG.3), into the vertical arm of the Tree
Stand.(Be sure to remove Driving Cap). Insert the second Pole Section into the upper end of the first Pole
Section.
(3) Attach the Plastic Cap on the top of the second Pole Section.
(4) Pass the Plastic Cap through the bottom of the of top hole of the Spiral Tree (Part # 2) and let the
Spiral Tree drape around the Pole Sections.
(5) Attach the Star Tree Topper (Part # 1) into the top of the Plastic Cap.
(6) Insert the hooks at the end of the two supporting strings into the metal holes on the two arms of the
tree stand (FIG.4).
(7) Plug in.
FIG.1 FIG.2
FIG.3 FIG.4