Trinity TLS-0401 User manual

OWNER’S MANUAL
41 in / 104 cm STAINLESS STEEL TOOL CHEST COMBO
Model # TLS-0401
Everything in its place.®

Your TRINITY Professional 41 in / 104 cm Stainless Steel Tool Chest Combo should include the
following parts. Please inspect box contents to ensure you have received all components.
If you are missing any parts, need assistance with assembly or have questions, please contact TRINITY
Customer Service: 800.985.5506 or [e-mail]. Parts can also be requested online at
www.trinityii.com (Help & More, Contact Us).
You will need 10mm wrench (for handles), 14mm wrench (for casters) and Phillips screwdriver for
assembly (not included).
PARTS LIST
TOP CHEST (1)
A
SIDE HANDLE (4)
C D
CASTER BOLT (16)
M10
E
LINER (12)
F
JK
HANDLE BOLT (24)
M6
LOCKING
CASTER (2)
G
NON-LOCKING
CASTER (2)
KEY (4)
© 2016 TRINITY - 800.985.5506
1
BOTTOM CHEST (1)
B
REAR BRACE (2)
H
BRACE SCREW (8)
I

ASSEMBLY INSTRUCTIONS
Be sure to assemble the SIDE HANDLES (C) on
both the TOP CHEST (A) and BOTTOM CHEST
(B) to make it easier to move your Tool Chest.
Position the SIDE HANDLE (C) over the pre-
installed nuts on the side of your Tool Chest.
Insert HANDLE BOLTS (D) through holes on
SIDE HANDLE (C). Use a 10mm wrench to
tighten HANDLE BOLTS (D) to your Tool Chest.
Repeat these instructions to install all the SIDE
HANDLES (C).
© 2016 TRINITY - 800.985.5506 2
STEP 1
STEP 2
A (1) 10mm
E (2) F (2) G (16)
B (1) C (4) D (24)
Carefully lay BOTTOM CHEST (B) on its backside.
Position LOCKING CASTERS (E) on the side of the
BOTTOM CHEST (B) of your choice and align holes to pre-
installed nuts on the underside of BOTTOM CHEST (B).
Use a 14mm socket wrench to tighten CASTER BOLT (G)
to BOTTOM CHEST (B).
Repeat above instructions to install the NON-LOCKING
CASTERS (F).
Notes:
* Make sure to install both of the LOCKING CASTERS (E)
on the same side.
** For ease of use, place LOCKING CASTERS (E) on the
side you will regularly push or pull.
*** If you plan to push the Tool Chest against a wall,
place LOCKING CASTERS (E) on the front long side for
ease of access.
14mm

ASSEMBLY INSTRUCTIONS
Place the LINERS (J) inside the top
compartment and inside of each drawer.
After standing BOTTOM CHEST (B) back up,
carefully place TOP CHEST (A) on top. Be sure to
assemble the REAR BRACES (H) to secure the
TOP CHEST (A) to the BOTTOM CHEST (B).
Position the REAR BRACE (H) over the pre-
installed nuts at the back edge where the two
CHESTS (A+B) adjoin. Attach the REAR BRACE
(H) using the BRACE SCREW (I). Tighten
securely.
Repeat these instructions to install both REAR
BRACES (H).
© 2016 TRINITY - 800.985.5506
3
STEP 4
Phillips
H (2) I (8)
J (12)
STEP 3

USAGE INSTRUCTIONS
DRAWER REMOVAL
DRAWER REPLACEMENT
Pull the drawer out so that it is almost fully
extended. On the RIGHT-hand slide, push the
black release lever DOWN. On the LEFT-hand
slide, pull the black release lever UP. While
holding the levers as instructed, pull the
drawer forward until released from the slides
attached to the Tool Chest (“Tool Chest Slides”).
Note: The slides attached to the drawer
(“Drawer Slides”) are an integral part of the
drawer and must be removed along with the
drawer itself.
To replace the drawer, pull the slides out completely. Insert the brackets on each side of the Drawer
Slides into the corresponding slots on the Tool Chest Slides, making sure they are properly positioned.
Once the brackets are inserted into the slots, completely close the drawer to set all slides in their
proper positions.
© 2016 TRINITY - 800.985.5506 4

© 2016 TRINITY - 800.985.5506
5
Part Number Description Part Number Description
1) XBS-17-003-4118 Top Lid 10) XBK-22-001-2316 24” Drawer Liner
2) AMA-05-007-1250 12” Drawer Handle 11) XBK-22-001-4015 Top Liner
3) XBS-07-001-1206 12” Small Drawer 12) AMA-05-007-2425 24” Drawer handle
4) XBS-18-005-4118 Top Chest Body 13) ZSV-12-001-1575 Slide (drawer side)
5) ZSV-01-001-0612 Handle Bolt 14) ZSV-12-002-1575 Slide (tool chest side)
6) XSV-05-001-0900 Side Handle 15) XBS-07-001-2403 24” Small Drawer
7) XBS-07-001-1209 12” Large Drawer 16) XBK-10-001-0XXX Key
8) XBS-07-001-2406 24” Large Drawer 17) CSV-11-001-0XXX Lock
9) XBK-22-001-1216 12” Drawer Liner 18) PBK-09-002-0001 Gas Lift
TRINITY Customer Service provides the following replacement parts:
5
10
2
6
3
8
11
14
15
18
12
7
9
16
1
4
13
17
SERVICE PARTS LIST –TLS-0401: TOP CHEST
NOTE: Replacement keys may be ordered using the code shown on the face of
the lock. The Top and Bottom Chests may have different key codes.

© 2016 TRINITY - 800.985.5506 6
SERVICE PARTS LIST –TLS-0401: BOTTOM CHEST
NOTE: If you need replacements for parts not mentioned in this user guide, please
call us at 800.985.5506, or send an email to [e-mail], and we
will be glad to help with your replacement parts.
Part Number Description Part Number Description
1) CSV-11-001-0XXX Lock 10) ZSV-99-002-5020 Non-locking Caster
2) XBK-10-001-0XXX Key 11) XBS-18-006-4118 Bottom Chest Body
3) XBS-07-001-3803 Small Drawer 12) ZSV-12-001-1575 Slide (drawer side)
4) XBK-22-001-3716 Drawer Liner 13) ZSV-12-002-1575 Slide (tool chest side)
5) XBS-07-001-3806 Medium Drawer 14) ZSV-01-001-0612 Handle Bolt
6) AMA-05-007-3800 Drawer Handle 15) XSV-05-001-0900 Side Handle
7) XBS-07-001-3809 Large Drawer 16) ZSV-19-003-0275 Rear Brace
8) ZSV-99-001-5020 Locking Caster 17) ZSV-01-004-0410 Brace Screw
9) ZSV-01-001-1020 Caster Bolt
TRINITY Customer Service provides the following replacement parts:
5
2
6
3
8
7
1
4
10
11
14
15
12
9
16
13
17

© 2016 TRINITY - 800.985.5506
7
WARNINGS
1. Read and understand all instructions. Failure to follow all instructions may result in injury
and/or damage.
2. The warnings, cautions, and instructions discussed in this manual cannot cover all
possible conditions or situations that may occur. The user must always be aware of their
environment and ensure that they use the product in a safe and responsible manner.
3. Do NOT modify the product in any way. Unauthorized modification may impair the
function and/or safety of the product, and may affect the life of the product.
4. Check for damaged parts. Before using this product, carefully check that all parts are in
good condition, and that the product will operate properly and perform its intended
function. Check for damaged parts and any other conditions that may affect the operation
of this product. Replace damaged or worn parts, and never use this product with a damaged
part.
5. Do NOT overload the product.
6. Lock the casters when leaving tool chest in stationary position.
7. Lock the drawers and lid before moving the tool chest.
8. Do NOT open more than one drawer at a time. Tipping can occur.
9. Do NOT step on open drawers.
10. Do NOT let children play near chest.
CARE AND MAINTENANCE
•Avoid harsh, abrasive cleaners, and other corrosive chemicals.
•Do not use scouring pad for cleaning.
•Keep dry and avoid damp environments.
•Use a quality stainless steel cleaner and follow instructions that come with the cleaner.
Wipe ALONG the grain (NOT against).
Weight capacity per drawer 100 lb
Total weight capacity of tool chest 2200 lb

Thank you for purchasing a TRINITY 41 in / 104 cm Stainless Steel Tool Chest Combo. In
order to register your product and receive streamlined customer service, please fill out the
following Product Registration Form and (1) fax the form to 310.347.4134 (2) complete the
Product Registration Form online at www.trinityii.com or (3) scan and email the form to
[e-mail]. Include a copy of your original receipt with your submission.
First Name: Last Name:
Address:
City: State: Zip Code:
Email Address: Phone:
Product Model #: TLS-0401 Purchase Date: / /
Location of Purchase:
Please rate the importance of each feature (1=least important; 10=most important)
Quality Price Size/Capacity Appearance Other
How did you hear about our product?
Magazine Ad Catalog Salesperson Word of Mouth
Internet Store Display Other
Marital Status: Single Married
Household Income: Below $50,000 $50,000-$150,000 $150,000+
Education: High School College Graduate School
Primary Residence: Own Rent
Comments/Suggestions:
PRODUCT REGISTRATION
© 2016 TRINITY - 800.985.5506 8

© 2016 TRINITY - 800.985.5506
9

1 YEAR LIMITED WARRANTY
TRINITY 41in / 104 cm STAINLESS STEEL
TOOL CHEST COMBO
Model # TLS-0401
Trinity International Industries (“Trinity”) warrants to the original consumer purchaser (“Purchaser”) of the
TRINITY 41 in / 104 cm Stainless Steel Tool Chest Combo (“Product”) that each Product shall be free
from defects in workmanship and materials for a period of 1 year from the date of original purchase.
Trinity’s obligation under this warranty shall be limited to repair or replacement of, or adequate
compensation for the Product which shall not be greater than the amount of the purchase price of the
Product, at the option of Trinity, during the warranty period. All replaced parts and Products become the
property of Trinity and must be returned to Trinity.
This warranty excludes normal wear and tear of the Product and its parts or components, and damage arising
from any of the following: negligent use or misuse of the Product, use contrary to this User’s Manual, or
alteration by any one other than Trinity. The warranty period of 1 year shall not be extended or renewed by
the repair or replacement of, or compensation for, the Product. Any warranty implied by applicable law is
limited in duration to one year from the date of purchase and is subject to the same conditions and
limitations as is provided for our express warranty.
Except as set forth herein, and to the extent of applicable there are no warranties on this Product either
express or implied, and Trinity disclaims all warranties including, but not limited to, any implied warranties of
merchantability, infringement or fitness for a particular purpose. No warranty or guarantee given by any
person, firm, or corporation with respect to this product shall be binding on Trinity.
If your Product is defective or otherwise requires service or parts, please call TRINITY Customer Service toll-
free at [phone], between 8:00 a.m. and 5:00 p.m., PST. Please tell us which model you purchased,
the date of the purchase, and the problem with your Product. A copy of your original purchase receipt must
accompany your service request.
LIMITATION OF REMEDIES AND LIABILITY
Trinity (and its employees, officers, members, managers, affiliates an assigns) shall not be liable for any
incidental, consequential, special, indirect, remote, special or punitive damages for breach of any warranty,
express or implied, including, but not limited to, lost profits, lost savings, loss of anticipated benefits and
attorneys’ fees, which arise out of the purchase, use or inability to use the Product, whether arising out of
contract, negligence, strict tort, product liability, or any other legal theory on which a claim is based. As
noted above, to the extent damages are allowed by our express warranty or by applicable law, those
damages may not exceed the purchase price paid for the Product. Without limiting the foregoing Purchaser
assumes all risk and liability for loss, damage or injury to Purchaser and Purchaser’s property and to others
and their property arising out of the use, misuse, or inability to use this Product. This limited warranty shall
not extend to anyone other than the original purchaser of this product, is nontransferable and states your
exclusive remedy.
Some states do not allow the exclusion or limitation of incidental, consequential, special, or punitive
damages, so the above limitation or exclusion may not apply to you. The above warranty gives you specific
legal rights, and you may have other rights which vary from state to state.
© 2016 TRINITY - 800.985.5506 10

TRINITY Customer Service
TEL: [phone]
FAX: [phone]
EMAIL: [e-mail]
Monday through Friday
8:00 AM –5:00 PM (PST)
www.trinityii.com
QUESTIONS? NEED PARTS?
WE ARE HERE TO HELP!
Please feel free to contact us. There are no questions too small, or
any problems too big. We’re committed to providing our customers
with the highest level of service.
CONTACT US