Tripp Lite SR45UBMD Installation and operating instructions

Owner’s Manual Addendum
SmartRack™Side Panel Latch Installation
Important: Before installing the side panels, you must
install a latch (included) in each side panel.
1Working from the outer surface of the side panel, insert
the upper portion of the latch into the side panel cutout as
shown.
2Push the lower portion of the latch into the side panel
cutout as shown.
3Snap the latch into place. The latch should be flush with
the outer surface of the side panel. Repeat the process for
each side panel.
Note: To install the side panels, follow the instructions in
the rack enclosure owner’s manual.
1111 W. 35th Street, Chicago, IL 60609 USA
773.869.1234 (USA) • 773.869.1212 (International)
www.tripplite.com
Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice. Made in China.
Copyright © 2009 Tripp Lite. All rights reserved. 200905072 • 932902-EN
WARRANTY
REGISTRATION:
register online today for a
chance to win a FREE Tripp Lite
product—www.tripplite.com/warranty
1
2
3