Tripp Lite U209-005-DB25 User manual

1
1111 W. 35th Street, Chicago, IL 60609 USA
tripplite.com/support
Copyright © 2022 Tripp Lite. All rights reserved.
Owner’s Manual
WARRANTY REGISTRATION
Register your product today and be automatically entered to
win an ISOBAR®surge protector in our monthly drawing!
tripplite.com/warranty
USB to Serial
Adapter
Model: U209-005-DB25
Español 13 • Français 25
Русский 37 • Deutsch 49

2
Package Contents
Features
• U209-005-DB25 to Serial Adapter
• DB9 to DB25 Adapter
• Owner’s Manual
• Supports data transfer rates up to 250 Kbps
• External power not required
• Supports remote wake up and power
management
• Premium double-shielded cable eliminates
cross-talk and reduces EMI/RFI interference

3
System Requirements
• Computer with an available USB port
• Compatible with Windows®, Mac®and
Linux operating systems
• Compatible with Android™ devices (tablets/
phones) with USB Host Mode (OTG) support
and Android OS version 3.2 and above
(see the Android compatibility list file on
Tripp Lite’s website at tripplite.com)
• Android-powered devices will require a
USB Host Mode (OTG) cable such as
Tripp Lite’s U052-06N to connect to the
U209-005-DB25

4
Installation
Note: The following instructions show how to install
the driver on a Windows 7 computer. The installation
steps will be similar for other Windows operating
systems. For non-Windows operating systems,
reference the installation files on Tripp Lite’s website
at tripplite.com. Compatible Android devices do not
require a driver for use with the U209-005-DB25,
but do require that a terminal server application be
downloaded. The Prolific PL2303GS USB-UART app
is recommended and can be found in the Google Play
Store.
1. Without connecting the U209-005-DB25,
power on your computer. Drivers for the
cable can be downloaded from
tripplite.com/support.

5
Installation
2. When the driver installer program launches,
click the Next button to start installation.

6
Installation
3. The driver installation begins. A progress
bar tracks where you are in the installation
process.

7
Installation
4. Once the installation process is complete,
click the Finish button to close out of the
program.
5. (Optional) Connect the DB9 to DB25
adapter to the U209-005-DB25’s DB9 port.
6. Connect the U209-005-DB25 to an
available USB port on your computer.
Windows will detect the adapter and
assign it a COM port upon completing the
installation.

8
Installation
7. To verify that your adapter has been
successfully installed, navigate to your
computer’s Control Panel and open the
Device Manager screen. The adapter will
appear in the Ports section, with its
assigned COM port next to it.

9
Pinout
1
5
6
9
CONN.2
DB9 FEMALE
DB9/DB25 Adapter Pinout
RS-232 DB9 Pinout
14
13
25
1
CONN.1
DB25 MALE
8
20
2
3
6
4
5
7
22 9
5
8
7
6
2
3
4
1
Conn.1
Pin Assignment
Conn.2
Pin Assignment
Conn.1 Conn.2
CONN.1
DB25 MALE
CONN.2
DB9 FEMALE

10
Warranty and Product
Registration
3-Year Limited Warranty
TRIPP LITE warrants its products to be free from defects in
materials and workmanship for a period of three (3) years
from the date of initial purchase. TRIPP LITE’s obligation
under this warranty is limited to repairing or replacing (at its
sole option) any such defective products. To obtain service
under this warranty, you must obtain a Returned Material
Authorization (RMA) number from TRIPP LITE or an authorized
TRIPP LITE service center. Products must be returned to
TRIPP LITE or an authorized TRIPP LITE service center with
transportation charges prepaid and must be accompanied by
a brief description of the problem encountered and proof of
date and place of purchase. This warranty does not apply to
equipment, which has been damaged by accident, negligence
or misapplication or has been altered or modified in any way.
EXCEPT AS PROVIDED HEREIN, TRIPP LITE MAKES NO
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE.
Some states do not permit limitation or exclusion of implied
warranties; therefore, the aforesaid limitation(s) or exclusion(s)
may not apply to the purchaser.
EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL TRIPP LITE
BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF
THIS PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGE. Specifically, TRIPP LITE is not liable for any
costs, such as lost profits or revenue, loss of equipment, loss
of use of equipment, loss of software, loss of data, costs of
substitutes, claims by third parties, or otherwise.

11
Warranty and Product
Registration
Use of this equipment in life support applications where failure
of this equipment can reasonably be expected to cause the
failure of the life support equipment or to significantly affect its
safety or effectiveness is not recommended. Do not use this
equipment in the presence of a flammable anesthetic mixture
with air, oxygen or nitrous oxide.
PRODUCT REGISTRATION
Visit tripplite.com/warranty today to register your new Tripp Lite
product. You’ll be automatically entered into a drawing for a
chance to win a FREE Tripp Lite product!*
* No purchase necessary. Void where prohibited. Some restrictions apply.
See website for details.
Tripp Lite follows a policy of continuous improvement. Product
specifications are subject to change without notice.
FCC Notice, Class B
This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must
accept any interference received, including interference that
may cause undesired operation.
Note: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a particular
installation.

12
Regulatory Compliance
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
Any changes or modifications to this equipment not expressly
approved by Tripp Lite could void the user’s authority to operate
this equipment.
WEEE Compliance Information for Tripp Lite Customers
and Recyclers (European Union)
Under the Waste Electrical and Electronic Equipment
(WEEE) Directive and implementing regulations,
when customers buy new electrical and electronic
equipment from Tripp Lite they are entitled to:
• Send old equipment for recycling on a one-for-one,
like-for-like basis (this varies depending on the country)
• Send the new equipment back for recycling when this
ultimately becomes waste
Tripp Lite has a policy of continuous improvement.
Specifications are subject to change without notice. Photos
and illustrations may differ slightly from actual products.
1111 W. 35th Street, Chicago, IL 60609 USA
tripplite.com/support
21-09-364 9340E0_RevA

13
1111 W. 35th Street, Chicago, IL 60609, EE. UU.
tripplite.com/support
Copyright © 2022 Tripp Lite. Todos los derechos reservados.
Manual del Propietario
Adaptador
USB a Serial
Modelo: U209-005-DB25
English 1 • Français 25
Русский 37 • Deutsch 49

14
Contenido del Empaque
Características
• U209-005-DB25 - Adaptador USB a Serial
• Adaptador DB9 a DB25
• Manual del Propietario
• Soporta velocidades de transferencia de
datos de hasta 250 Kbps
• No necesita alimentación externa.
• Admite las funciones de encendido remoto y
administración de la alimentación.
• Cable Premium de doble blindaje que
elimina la diafonía e interferencia por EMI /
RFI

15
Requisitos del Sistema
• Computadora con un puerto USB disponible
• Compatible con sistemas operativos
Windows®, Mac®y Linux
• Compatible con dispositivos Android™
(tabletas/teléfonos) con soporte para Modo
de Servidor Central USB (OTG) y Android OS
versión 3.2 y superior (consulte el archivo de
la lista de compatibilidad con Android en el
sitio web de Tripp Lite en tripplite.com)
• Los dispositivos con sistema Android
requerirán un cable de Modo de Servidor
Central USB (OTG) como el U052-06N de
Tripp Lite para conectar el U209-005-DB25
al dispositivo.

16
Instalación
Nota: Las siguientes instrucciones muestran cómo
instalar el controlador en una computadora con
Windows 7. Los pasos de instalación serán similares
para otros sistemas operativos Windows. Para
sistemas operativos diferentes a Windows, consulte
los archivos de instalación en el sitio web de
Tripp Lite en tripplite.com. Los dispositivos
compatibles con Android no requieren un controlador
para usarse con el U209-005-DB25, pero sí
requieren que se descargue una aplicación de
servidor de terminal. Se recomienda la prolífica
aplicación USB-UART PL2303GS y puede encontrarse
en la tienda Google Play.
1. Sin conectar el U209-005-DB25, encienda
su computadora. Los controladores para el
cable pueden descargarse de
tripplite.com/support.

17
Instalación
2. Cuando se inicie el programa de Instalador
de controladores, haga clic en el botón Next
para iniciar la instalación.

18
Instalación
3. Comienza la instalación del controlador. Una
barra de avance rastrea donde usted está
en el proceso de instalación.

19
Instalación
4. Una vez completado el proceso de
instalación, haga click en el botón Terminar
para cerrar el programa.
5. (Opcional) Conecte el adaptador DB9 a
DB25 al puerto DB9 del U209-005-DB25.
6. Conecte el U209-005-DB25 a un puerto
USB disponible en su computadora.
Windows detectará el adaptador y asignará
un puerto COM al completar la instalación.

20
Instalación
7. Para comprobar que el adaptador se ha
instalado correctamente, vaya a Panel
de Control de su computadora y abra la
pantalla de administrador de dispositivos.
El adaptador aparecerá en la sección de
Puertos, con su puerto COM asignado junto
con él.