Tripp Lite B126-1A1-WHD4HH User manual

1
Mini Wireless HDMI
Extender Kit, 50 ft. (15 m)
Models: B126-1A1-WHD4HH (HDMI Mini Transmitter),
B126-1A1-WHD4CH (USB-C Mini Transmitter)
USB Type-C™ and USB-C™ are trademarks of USB Implementers Forum
1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support
Copyright © 2020 Tripp Lite. All rights reserved.
Owner's Manual
WARRANTY REGISTRATION
Register your product today and be
automatically entered to win an ISOBAR®
surge protector in our monthly drawing!
tripplite.com/warranty
Español 13 • Français 25 • Русский 37

2
B126-1A1-WHD4HH
• HDMI Mini Transmitter
• HDMI Mini Receiver
• (2) USB Micro-B to USB-A M/M Cables
• (2) HDMI M/F Cables
• (2) Right-Angle HDMI M/F Adapters
• Owner’s Manual
B126-1A1-WHD4CH
• USB-C Mini Transmitter
• HDMI Mini Receiver
• USB Micro-B to USB-A M/M Cable
• HDMI M/F Cable
• Right-Angle HDMI M/F Adapter
• Owner’s Manual
Package Contents

3
• Extends an HDMI audio/video signal wirelessly up to 50 ft.
(15 m) from the source
• All-in-one wireless solution—no cabling infrastructure required
• Transmits high-definition video and stereo audio
• Protects your transmissions with AES 128 encryption
• HDMI 1.3 and HDCP 1.2 compatible
• Supports 24-bit Deep Color (8 bits per channel)
• Supports 300 MHz/3.4 Gbps per channel bandwidth
(10.2 Gbps total)
• Plug-and-play—no software or external power required
• HDMI (B126-1A1-WHD4HH) or USB-C (B126-1A1-WHD4CH)
source device, such as a Blu-ray™ player or a laptop
• HDMI display device, such as a television, monitor or projector
Product Features
System Requirements

4
B126-1A1-WHD4HH
Transmitter
Indicators and Connection
1HDMI Input (Male): Connects to the source device’s HDMI
port with the included HDMI cable.
2Signal LED: Illuminates when both units are powered on and
connected. Blinks rapidly when transmitting a signal; blinks
slowly when not.
3USB Micro-B Port (Female): Connects to the source’s
USB-A port with the included USB Micro-B cable.
4Power LED: Illuminates when the transmitter is powered on.
1 2 3 4

5
Indicators and Connection
1 2 3 4
1HDMI Output (Male): Connects to the display device’s HDMI
port with the included HDMI cable.
2Signal LED: Illuminates when both units are powered on and
connected. Blinks rapidly when transmitting a signal; blinks
slowly when not.
3USB Micro-B Port (Female): Connects to the display’s
USB-A port with the included USB Micro-B cable.
4Power LED: Illuminates when the receiver is powered on.
Receiver

6
B126-1A1-WHD4CH
Transmitter
Indicators and Connection
1USB-C Input (Male): Connects to the source device’s USB-C
port. Transmitter is bus-powered and needs no external power
supply.
2Signal LED: Illuminates when both units are powered on and
connected. Blinks rapidly when transmitting a signal; blinks
slowly when not.
3Power LED: Illuminates when the transmitter is powered on.
1 2 3

7
Indicators and Connection
1 2 3 4
1HDMI Output (Male): Connects to the display device’s HDMI
port with the included HDMI cable.
2Signal LED: Illuminates when both units are powered on and
connected. Blinks rapidly when transmitting a signal; blinks
slowly when not.
3USB Micro-B Port (Female): Connects to the display’s
USB-A port with the included USB Micro-B cable.
4Power LED: Illuminates when the receiver is powered on.
Receiver

8
Installation and Operation
Refer to the following steps and diagrams to set up your
transmitter/receiver installation.
B126-1A1-WHD4HH
B126-1A1-WHD4CH
DVD
Phone
HDMI Extender
TX Sender*
TypeC Extender
TX Sender
HDMI Extender
RX Receiver
HDMI Extender
RX Receiver
Micro USB Cable
Micro USB Cable
HDMI Display
HDMI Display
*Transmitter is bus-powered; however, if signal strength is not ideal,
additional power can be provided via the included Micro-USB cable.

9
Installation and Operation
1. Connect the transmitter to the source device’s HDMI
(B126-1A1-WHD4HH) or USB-C (B126-1A1-WHD4CH) port.
2. Connect the receiver to the display device’s HDMI port.
3. The transmitter is bus-powered and requires no external
power. However, if the signal is not strong enough, additional
power can be provided to the transmitter (B126-1A1-WHD4HH
only) by connecting the included USB Micro-B cable between
the transmitter’s USB Micro-B port and the source’s USB-A
port.
4. Connect the included USB Micro-B cable between the
receiver’s USB Micro-B port and the display’s USB-A port.
5. The transmitter’s and the receiver’s Power LEDs will illuminate
to indicate they are receiving power.
6. The transmitter’s and the receiver’s Signal LEDs will illuminate
to indicate they are sharing a wireless connection.

10
Specifications
Specifications B126-1A1-WHD4HH B126-1A1-WHD4CH
Transmitter HDMI (Male) USB Type-C (Male)
Receiver HDMI (Male) HDMI (Male)
Power
Transmitter Power USB Micro-B Bus Powered
Receiver Power USB Micro-B USB Micro-B
Power Consumption TX: <2.5W; RX: <5W TX: <3W; RX: <5W
Video Transmission
HDMI Compliance HDMI 1.3 HDMI 1.3
HDCP Compliance HDCP 1.2 HDCP 1.2
HDMI Resolution 1080p @ 60 Hz 1080p @ 60 Hz
Maximum Transfer
Rate 10.2 Gbps 10.2 Gbps
Input and Output
TMDS Signal 0.5 to 1.5Vp-p (TMDS) 0.7 to 1.2Vp-p (TMDS)
Input and Output
DDC Signal Input 5Vp-p(TTL) 5Vp-p(TTL)
Transfer Method 5.8G Wireless Transmission 5.8G Wireless Transmission
Transmission distance 15 m (50 ft.) 15 m (50 ft.)
Latency ≤200 ms ≤200 ms
Environmental
Protection
Level (Electrostatic)
1a Contact Discharge Level 3
1b Air Discharge Level 3
Standard: IEC61000-4-2
1a Contact Discharge Level 3
1b Air Discharge Level 3
Standard: IEC61000-4-2
Working Temperature 32° to 122°F (0° to 50°C) 32° to 149°F (0° to 65°C)
Storage Temperature 14° to 158°F (-10° to 70°C) -4° to 158°F (-20°C to 70°C)
Humidity (No
Condensation) 0 to 90% 0 to 90%

11
Troubleshooting
1. The picture is flickering or not showing at all. Make sure
nothing that could impede the signal strength is between the
transmitter and receiver units. Attempting to transmit video
through plaster or glass walls and windows may result in
limited signal quality.
2. The transmitter and receiver are failing to establish a
connection. Make sure the transmitter is plugged in correctly
to the USB-C or HDMI port on the source device and the
receiver unit is plugged in correctly to the HDMI port of the
display. Then, make sure the receiver is correctly receiving
power by confirming the USB Micro-B cable is plugged in
correctly (see Installation and Operation). Make sure
the distance between the transmitter and receiver does
not exceed 15 meters (50 feet). If video is still not being
transmitted, unplug the transmitter from the source device
and plug it back in to reset the connection.
3. The audio from the source content is not being
transmitted properly. If using a source with internal
speakers (such as a notebook or laptop computer), the
user must manually change the output sound on the source
settings to “HDMI Extender.”
4. The transmitter or receiver is overheating. If the product
gets too hot, it will not function properly. Are the units located
in an area that exposes them to elevated temperatures? See
Specifications for the exact temperature range of the units.

12
1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support
20-04-175 • 93-3C8A_RevA
Warranty and Product Registration
3-Year Limited Warranty
Seller warrants this product, if used in accordance with all applicable instructions, to be free
from original defects in material and workmanship for a period of 3 years from the date of initial
purchase. If the product should prove defective in material or workmanship within that period,
Seller will repair or replace the product, at its sole discretion.
THIS WARRANTY DOES NOT APPLY TO NORMAL WEAR OR TO DAMAGE RESULTING FROM
ACCIDENT, MISUSE, ABUSE OR NEGLECT. SELLER MAKES NO EXPRESS WARRANTIES OTHER
THAN THE WARRANTY EXPRESSLY SET FORTH HEREIN. EXCEPT TO THE EXTENT PROHIBITED BY
APPLICABLE LAW, ALL IMPLIED WARRANTIES, INCLUDING ALL WARRANTIES OF MERCHANTABILITY
OR FITNESS, ARE LIMITED IN DURATION TO THE WARRANTY PERIOD SET FORTH ABOVE; AND
THIS WARRANTY EXPRESSLY EXCLUDES ALL INCIDENTAL AND CONSEQUENTIAL DAMAGES. (Some
states do not allow limitations on how long an implied warranty lasts, and some states do not
allow the exclusion or limitation of incidental or consequential damages, so the above limitations
or exclusions may not apply to you. This warranty gives you specific legal rights, and you may have
other rights which vary from jurisdiction to jurisdiction.)
WARNING: The individual user should take care to determine prior to use whether this device is
suitable, adequate or safe for the use intended. Since individual applications are subject to great
variation, the manufacturer makes no representation or warranty as to the suitability or fitness of
these devices for any specific application.
Product Registration
Visit tripplite.com/warranty today to register your new Tripp Lite product. You’ll be automatically
entered into a drawing for a chance to win a FREE Tripp Lite product!*
* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.
Tripp Lite has a policy of continuous improvement. Specifications are subject to change without
notice. Photos and illustrations may differ slightly from actual products.

13
Mini Juego Extensor
Inalámbrico HDMI,
15 m [50 pies]
Modelos: B126-1A1-WHD4HH (Mini Transmisor HDMI),
B126-1A1-WHD4CH (Mini Transmisor USB C)
USB Tipo C™ y USB C™ son marcas comerciales registradas del USB
Implementers Forum
1111 W. 35th Street, Chicago, IL 60609 EE UU • tripplite.com/support
Copyright © 2020 Tripp Lite. Todos los derechos reservados.
Manual del Propietario
English 1 • Français 25 • Русский 37

14
B126-1A1-WHD4HH
• Mini Transmisor HDMI
• Mini Receptor HDMI
• (2) Cables USB Micro B a USB A M/M
• (2) Cables HDMI M/H
• (2) Adaptadores HDMI en Ángulo Recto (HDMI M/H)
• Manual del Propietario
B126-1A1-WHD4CH
• Mini Transmisor USB C
• Mini Receptor HDMI
• Cable USB Micro B a USB A M/M
• Cable HDMI M/H
• Adaptador HDMI en Ángulo Recto M/H
• Manual del Propietario
Contenido del Empaque

15
• Extiende en forma inalámbrica una señal de audio y video
HDMI hasta a 15 m [50 pies] de la fuente
• Solución inalámbrica todo en uno—sin necesidad de
infraestructura de cableado
• Transmite audio estéreo y video de alta definición
• Protege sus transmisiones con encriptado AES 128
• Compatible con HDMI 1.3 y HDCP 1.2
• Soporta Color Verdadero de 24 bits (8 bits por canal)
• Soporta 300 MHz / 3.4 Gbps por ancho de banda de canal
(10.2 Gbps en total)
• Conectar y Usar—No requiere alimentación externa o software
• Dispositivo fuente HDMI (B126-1A1-WHD4HH) o USB C
(B126-1A1-WHD4CH), como un reproductor Blu-ray™ o una
laptop
• Dispositivo de visualización HDMI, como un televisor, monitor o
proyector
Características del Producto
Requisitos del Sistema

16
B126-1A1-WHD4HH
Transmisor
Indicadores y Conexión
1Entrada HDMI (Macho): Se conecta al puerto HDMI del
dispositivo fuente con el cable HDMI incluido.
2LED de señal: Se enciende cuando ambas unidades están
encendidas y conectadas. Destella rápidamente al transmitir
una señal; destella lentamente cuando no.
3Puerto USB Micro B (Hembra): Se conecta al puerto USB A
de la fuente con el cable USB Micro B incluido.
4LED de Encendido: Se ilumina cuando se enciende el
transmisor.
1 2 3 4

17
Indicadores y Conexión
1 2 3 4
1Salida HDMI (Macho): Se conecta al puerto HDMI del
dispositivo de visualización con el cable HDMI incluido.
2LED de señal: Se enciende cuando ambas unidades están
encendidas y conectadas. Destella rápidamente al transmitir
una señal; destella lentamente cuando no.
3Puerto USB Micro B (Hembra): Se conecta al puerto USB A
de la pantalla con el cable USB Micro B incluido.
4LED de Encendido: Se ilumina cuando se enciende el
receptor.
Receptor

18
B126-1A1-WHD4CH
Transmisor
Indicadores y Conexión
1Entrada USB C (Macho): Se conecta al puerto USB C del
dispositivo fuente. El transmisor es alimentado por el bus y no
requiere alimentación externa.
2LED de señal: Se enciende cuando ambas unidades están
encendidas y conectadas. Destella rápidamente al transmitir
una señal; destella lentamente cuando no.
3LED de Encendido: Se ilumina cuando se enciende el
transmisor.
1 2 3

19
Indicadores y Conexión
1 2 3 4
1Salida HDMI (Macho): Se conecta al puerto HDMI del
dispositivo de visualización con el cable HDMI incluido.
2LED de señal: Se enciende cuando ambas unidades están
encendidas y conectadas. Destella rápidamente al transmitir
una señal; destella lentamente cuando no.
3Puerto USB Micro B (Hembra): Se conecta al puerto USB A
de la pantalla con el cable USB Micro B incluido.
4LED de Encendido: Se ilumina cuando se enciende el
receptor.
Receptor

20
Instalación y Operación
Refiérase a los siguientes pasos y diagramas para configurar la
instalación de su transmisor y receptor.
B126-1A1-WHD4HH
B126-1A1-WHD4CH
DVD
Teléfono
Extensor HDMI
Emisor TX*
Extensor Tipe-C
Emisor TX
Extensor HDMI
Receptor RX
Extensor HDMI
Receptor RX
Cable Micro USB
Cable Micro USB
Pantalla HDMI
Pantalla HDMI
*El transmisor es alimentado por bus; sin embargo, si la intensidad de
la señal no es ideal, puede proporcionarse energía adicional mediante el
cable Micro USB incluido.