Tripp Lite B140-004 User manual

Tripp Lite
1111 West 35th Street
Chicago, IL 60609 USA
Telephone: +[phone]
E-mail: [email protected]
Model #: B140-004
DVI over Cat5 Extender/Splitter, 4-Port Local Transmitter Unit
Highlights
Supports DVI-D Single-Link video resolutions up to 1920 x 1080 @ 60Hz
For longer distances - Use a B140-1A0 or B140-1A0-WP active receiver unit
to extend a 1920 x 1080 @ 60Hz signal up to 150 ft., or a 1024 x 768 @ 60Hz
signal up to 200 ft.
For shorter distances - Use a B140-1P0 or B140-1P0-WP passive receiver
unit to extend a 1920 x 1080 @ 60Hz signal up to 50 ft., or a 1024 x 768 @
60Hz signal up to 100 ft.
Use 24AWG, Solid Wire Cat5e/6 cable, such as Tripp Lite's N202-Series, to
achieve maximum distance and resolution
Can further expand the range and number of monitors by adding B140-110
repeaters
Compatible with all operating systems
Plug and play, no software or drivers required
Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule
purchases
Description
The B140-004 transmits a DVI-D Single-Link signal to four monitors up to 200 ft. away using a single Cat5e/6 patch cable. To achieve maximum
distance and resolution, use 24AWG Solid Wire Cat5e/6 cable (Tripp Lite's N202-Series). An additional DVI port is provided for the connection of a
local monitor. This local DVI port can also be used to daisychain up to 3 units together, allowing for the connection of up to 13 monitors (12 remote,
1 local). Mounting hardware is included that allows the unit to be rackmounted, wallmounted or pole mounted. In addition, up to three units can be
mounted in 1U of rack space using a Tripp Lite B132-004-RB 19" rackmount bracket. The B140-002 is compatible with all operating systems, and is
plug and play, with no software or drivers required. Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases.
Installation is simple. Connect the B140-004 transmitter to a DVI source using a Tripp Lite P561-Series DVI cable (not included). Connect a Tripp
Lite B140-series receiver (not included) to each display using a Tripp Lite P561-Series DVI cable (not included). Finally, each remote receiver is
connected to an RJ45 port on the B140-004 using a single Cat5e/6 cable.
For longer extension distances, use a B140-1A0 or B140-1A0-WP active receiver unit to extend a 1920 x 1080 @ 60Hz signal up to 150 ft., or a
1024 x 768 @ 60Hz signal up to 200 ft..
For shorter extension distances, use a B140-1P0 or B140-1P0-WP passive receiver unit to extend a 1920 x 1080 @ 60Hz signal up to 50 ft., or a
1024 x 768 @ 60Hz signal up to 100 ft..
Further expand the range and number of monitors by using a B140-110 repeater unit. Add up to four remote units (three repeaters and one active
receiver) to each channel of the B140-004, for a total of 4 displays per channel. (An active receiver should be the last unit in a channel) A 1920 x
1080 @ 60Hz signal can be extended up to 125 ft. from each repeater to the next unit in the channel, or a 1024 x 768 @ 60Hz signal can be
extended up to 175 ft..
Package Includes
B140-004 DVI Over Cat5 Extender/Splitter, 4-Port Local Transmitter Unit
1 ft. DVI daisychain cable
Mounting hardware
External power supply (Input: 100-240V, 50/60Hz, 0.5A Output: 5V, 2A)
Owner's Manual
Features
Transmit a DVI-D Single-Link signal to four monitors up to 200 ft. away using a single Cat5e/6 patch cable

Supports DVI-D Single-Link video resolutions up to 1920 x 1080 @ 60Hz
For longer distances - Use a B140-1A0 or B140-1A0-WP active receiver unit to extend a 1920 x 1080 @ 60Hz signal up to 150 ft., or a
1024 x 768 @ 60Hz signal up to 200 ft.
For shorter distances - Use a B140-1P0 or B140-1P0-WP passive receiver unit to extend a 1920 x 1080 @ 60Hz signal up to 50 ft., or a
1024 x 768 @ 60Hz signal up to 100 ft.
Use 24AWG, Solid Wire Cat5e/6 cable, such as Tripp Lite's N202-Series, to achieve maximum distance and resolution
An additional DVI port is provided for the connection of a local monitor. This local DVI port can also be used to daisychain up to 3 units
together, allowing for the connection of up to 13 monitors (12 remote, 1 local).
Further expand the range and number of monitors by using a B140-110 repeater unit
Add up to four remote units (three repeaters and one active receiver) to each channel of the B140-004, for a total of 4 displays per channel.
(An active receiver should be the last unit in a channel)
A 1920 x 1080 @ 60Hz signal can be extended up to 125 ft. from each repeater to the next unit in the channel, or a 1024 x 768 @ 60Hz
signal can be extended up to 175 ft.
HDCP compatible
Compatible with all operating systems
Plug and play; no software or drivers required
Mounting hardware is included that allows the unit to be rackmounted, wallmounted or pole mounted. In addition, up to three units can be
mounted in 1U of rack space using a Tripp Lite B132-004-RB 19" rackmount bracket.
Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases.
Specifications
OVERVIEW
Cable Type DVI
Display Style Splitter
PHYSICAL
Optional mounting
accessory notes
Up to three B140-004 local units can be mounted in 1U of rack space using a Tripp Lite B132-004-RB
Extender/Splitter 19in rackmount bracket
Unit Dimensions (HWD/in) 1.125 x 5 x 4
Unit Dimensions
(HWD/cm)
2.86 x 12.7 x 10.16
Mounting accessories
included
Yes
Color Black
CONNECTIONS
Connector A
(X4) RJ45 (FEMALE)
Connector B
(X2) DVI-I (FEMALE)
WARRANTY
Product Warranty Period
(Worldwide)
1-year limited warranty
Related Items
Required Products
Related Model Description Qty.
B140-1A0 DVI Over Cat5 Active Extender Remote Unit 1

B140-1A0-WP DVI Over Cat5 Active Extender Remote Wallplate 1
B140-1P0 DVI Over Cat5 Passive Extender Remote Unit 1
B140-1P0-WP DVI Over Cat5 Passive Extender Remote Wallplate 1
Recommended Products
Related Model Description Qty.
N202-025-BL 25-ft. Cat6 Gigabit Solid Conductor Snagless Patch Cable (RJ45 M/M ) - Blue 1
N202-050-BL 50-ft. Cat6 Gigabit Solid Conductor Snagless Patch Cable (RJ45 M/M ) - Blue 1
N202-075-BL 75-ft. Cat6 Gigabit Solid Conductor Snagless Patch Cable (RJ45 M/M ) - Blue 1
N202-100-BL 100-ft. Cat6 Gigabit Solid Conductor Snagless Patch Cable (RJ45 M/M ) - Blue 1
N202-150-BL 150-ft. Cat6 Gigabit Solid Conductor Snagless Patch Cable (RJ45 M/M ) - Blue 1
N202-200-BL 200-ft. Cat6 Gigabit Solid Conductor Snagless Patch Cable (RJ45 M/M ) - Blue 1
Optional Products
Related Model Description Qty.
B132-004-RB 19" Rack Mount Bracket
(holds up to three B132 Series Transmitters)
1
B140-002 DVI over Cat5 Extender/Splitter, 2-Port Local Transmitter Unit 1
More information, including related products, owner's manuals, and additional technical specifications, can be found online at
www.tripplite.com/en/products/model.cfm?txtModelID=4600.
Copyright © 2013 Tripp Lite. All rights reserved. All trademarks are the sole property of their respective owners. Tripp Lite has a policy of continuous
improvement. Specifications are subject to change without notice. Photos may differ slightly from final products.