Sennheiser SKM 1030 Dimensions

SKM 1030
RF Wireless Systems | Tour-Guide Systems
General Features
j
System for guided tours in factories, museums, etc.
j
Narrow-band transmitters and receivers
j
Economical operation with rechargeable batteries
j
Can also be used as a tal bac system or a mini interpretation system
SKM 1030
j
Hand-held transmitter for tour guide
j
Loc able microphone on/off switch
j
Economical operation with rechargeable BA 1032 accupac
j
Super-cardioid condenser microphone head, effectively rejects side-borne noise
j
6 switchable frequencies in the 8 m band
j
100 mW RF output power for reliable transmission
j
Delivery includes: 1 hand-held transmitter with antenna
General Description
The SKM 1030 is a hand-held transmitter for mobile tour-guide systems. Besides
its “classic” area of application – guided tours in museums or factories – it can also
be used as a transmitter in a mini interpretation system or as a microphone in a
tal bac system. With the SZU 1032 lavalier clip the radiomicrophone can be worn
around the nec .
Product Variants
j
SKM 1030-7: Hand-held transmitter with 6 fixed
frequencies (36.64; 36.72; 37.04; 37.16; 37.82; 37.98 MHz) Cat. No. 003736
j
SKM 1030-7-SF: Hand-held transmitter with 6 frequencies
chosen by the customer (30–50 MHz) Cat. No. 003735
j
SKM 1030-7-BU: Hand-held transmitter with 6 frequencies
chosen by the customer, additional AF input (30–50 MHz) Cat. No. 003737
j
SKM 1030-7-UK: Hand-held transmitter with 3 or 6 UK
legal frequencies (48–50 MHz) Cat. No. 003738
j
SKM 1030-6 F: Hand-held transmitter with 6 French legal
frequencies (30–45 MHz) Cat. No. 003734
Technical Data SKM 1030-7
RF output power .................................. ≤ 100 mW (- 3 dB)
Transmission frequencies .................................................. 6
Frequency range......................30–45 MHz / 48–50 MHz
Preferred frequencies........... 36.64 / 36.72 / 37.04 MHz
37.16 / 37.82 / 37.98 MHz
Modulation................................................ narrow-band FM
Nominal / pea deviation .................± 8 Hz / ± 15 Hz
AF frequency response...... 80–12,000 Hz (+ 1 / -3 dB)
Signal-to-noise ratio ............................................ 68 dB(A)
THD............................................................................... < 0.3 %
Power supply ....................................... 1 x 9 V PP3 battery
or BA 1032 accupac
Operating time ...............................approx. 6 hrs, al aline
approx. 1.5 hrs, BA 1032
Dimensions.......................................................245 x 38 mm
Weight (incl. batteries) ..............................................250 g
Technical Data SKM 1030-7-SF
as SKM 1030-7, but:
Preferred frequencies.............any within the switching
bandwidth of 5 MHz
Technical Data SKM 1030-7-BU
as SKM 1030-7, but:
AF input ............................................ 2.5 mm jac , 120 mV

SKM 1030/HDE 1030
RF Wireless Systems | Tour-Guide Systems
Accessories for the hand-held transmitter
j
SZU 1032 lavalier clip Cat. No. 0037
j
STH 1051 stand mount Cat. No. 0036 6
j
MZW 1032 foam windshield Cat. No. 0037 5
j
MZW 1032 PRO velourised foam windshield Cat. No. 0037 6
j
BA 1032 accupack Cat. No. 003796
j
L 1032 charger Cat. No. 003729
j
NT 1032 plug-in mains unit for charger Cat. No. 0037 7
NT 1032-120, USA version Cat. No. 0037 8
NT 1032-UK, UK version Cat. No. 0037 9
Accessories for stethoset receiver
j
BA 90 spare accupack Cat. No. 003261
j
KEN 1030 colour-coded identification markers Cat. No. 053008
j
Replacement ear-cushions, black Cat. No. 037080
j
Replacement ear-cushions, transparent Cat. No. 0 09 9
j
L 90 charger for one BA 90 accupack Cat. No. 003362
L 90-120 USA version Cat. No. 003396
L 90-UK UK version (available from Sennheiser UK)
j
L 92-10 charging unit for 10 BA 90 (w/o PSU) Cat. No. 003355
j
L 92-20 charging unit for 20 BA 90 (w/o PSU) Cat. No. 003356
j
L 1030-10 charging unit for 10 receivers (w/o PSU) Cat. No. 00 02
j
KK 1030 cable for connecting 2 charging units
(NT 92 powers two units, NT 2013 powers 5 units) Cat. No. 00 125
j
EZL 1030-20L charging case with 2 charging units
for 20 receivers (w/o PSU) Cat. No. 003877
j
NT 92 PSU for up to 2 charging units Cat. No. 003357
NT 92-120 USA version Cat. No. 003358
NT 92-UK UK version Cat. No. 003359
j
NT 2013 PSU for up to 5 charging units Cat. No. 003 33
NT 2013-120, USA version Cat. No. 003 3
NG 2013-UK, UK version Cat. No. 05 332
135 mm
195 mm
HDE 1030 dimensions
38 mm
2 5 mm
SKM 1030 dimensions

RF Wireless Systems | Tour-Guide Systems
SKM 1030
The SKM 1030 is a narrow-band hand-held transmitter for use in tour-guide sys-
tems. For information on narrow-band technology, lease refer to the cha ter
”Introduction“. General information on working with hand-held transmitters can
be found in the cha ter ”Planning Theory“.
The micro hone on/off (mute) switch is a valuable feature during guided tours.
When the guide auses – e.g. when changing from one room to the other – he
switches off the micro hone, thus reventing unnecessary noise (this switch does
not switch off the transmitter). Six switchable transmission frequencies facilitate
working with different sets of receivers. Thus, simultaneous tours – for exam le
in different languages – are also ossible. The RF out ut ower of 100 mW is
adequate for reaching every listener, even in large factories.
The SKM 1030 is insensitive to handling noise and the su er-cardioid attern of the
micro hone head su resses sounds not emanating from the main ick-u direc-
tion. The transmitter is therefore also suitable for rough use in noisy industrial envi-
ronments. An im ortant note for handling: Let the wire antenna hang down loosely,
as the efficiency of the antenna would otherwise decrease very markedly.
The SKM 1030-7-BU version has a 2.5 mm mono jack audio in ut for feeding record -
ings, e.g. from ortable MiniDisc, CD or cassette layers, to the transmitter. Some
exam les: an artist’s recorded comments on his or her exhibit in a museum. Or a
greeting by a com any owner to the artici ants in a tour of the factory – fed to
the transmitter by a ersonal stereo.
For short tours, economical o eration with the rechargeable BA 1032 accu ack is
recommended. The L 1032 will charge a transmitter with accu ack inserted lus an
additional s are accu ack. The EZL 1030-20L charging and trans ort case includes
room for an L 1032 charger for the transmitter.
1 Channel selector switch (rear)
2 Lockable micro hone on/off (mute) switch
3 AF in ut (only with SKM 1030-7 BU)
4 Charging contacts
5 Sensitivity switch
6 On/off switch
1
2
3
4
5
6
SKM 1030 o erating controls
Micro hone on/off (mute) switch
L 1032 charger