CYP PUV-1510TX User manual

OPERATION MANUAL
OPERATION MANUAL
PUV-1510TX
HDBaseT™ 5Play™ Transmitter
(inc. PoH & single LAN, up to 100m)

3
DISCLAIMERS
The information in this manual has been carefully checked and is
believed to be accurate. CYP (UK) Ltd assumes no responsibility for any
infringements of patents or other rights of third parties which may result
from its use.
CYP (UK) Ltd assumes no responsibility for any inaccuracies that may be
contained in this document. CYP (UK) Ltd also makes no commitment to
update or to keep current the information contained in this document.
CYP (UK) Ltd reserves the right to make improvements to this document
and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted, transcribed,
stored in a retrieval system, or any of its part translated into any language
or computer file, in any form or by any means—electronic, mechanical,
magnetic, optical, chemical, manual, or otherwise—without express
written permission and consent from CYP (UK) Ltd.
© Copyright 2019 by CYP (UK) Ltd.
All Rights Reserved.
Version 1.1
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.

4
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or operate
this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of fire,
electrical shock and injury to persons.
• To prevent fire or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts inside
the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU if
it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufficient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO. DATE SUMMARY OF CHANGE
v1.00 16/05/2019 First release

5
CONTENTS
1. Introduction...........................................6
2. Applications ...........................................6
3. Package Contents ..................................6
4. System Requirements ...........................6
5. Features..................................................7
6. Operation Controls and Functions .......8
6.1 Front Panel................................................... 8
6.2 Rear Panel..................................................... 9
6.3. IR Cable Pin Assignment ......................10
6.4. D-Sub 9 Pin Definitions ........................10
7. Connection Diagram .......................... 11
8. Specifications...................................... 12
8.1 CAT5e/6/7 Cable Specification ...........13
8.2 Timing Support Chart ............................14
9. Acronyms............................................. 15

6
1. INTRODUCTION
The HDMI over single CAT5e/6/7 Transmitter can send uncompressed
audio/video and IP data over a single run of CAT5e/6/7 cable at a distance
up to 100 meter. It has the added benefit of control through the built-in
RS-232 and IR ports and a bi-directional LAN serving connection. The
Transmitter (PSE) can provide power to the Receiver (PD) allowing a
greater flexibility in installations.
2. APPLICATIONS
48V PoE from Transmitter (PSE) to Receiver (PD)
Household entertainment sharing and control
Lecture room display and control
Showroom display and control
Meeting room presentation and control
Classroom display and control
3. PACKAGE CONTENTS
1 x HDMI over CAT5e/6/7 Transmitter
1 x IR Blaster
1 x 48V DC adaptor
4. SYSTEM REQUIREMENTS
Input source equipment such as PS4/Blu-ray player and output HD TV/
display.

7
5. FEATURES
HDMI with 3D, 4K2K support, HDMI & DVI Compliant
Supports CEC bypass
Simultaneous transmission of uncompressed data over a single
100m/328ft CAT5e/6/7 cable
5Play™ convergence: HDMI, LAN, PoE & Control (IR & RS-2232)
Supports resolution up to 4K2K@50/60 & YUV_420 and 21:9
Supports standard 48V from Transmitter (PSE) to Receiver (PD)
Installation Friendly
Supports HDMI Input cable distance up to 5m at 4K2K@50/60 &
YUV_420
Note:
The standard 48V PoE function is designed for powering compatible Receiver
units only, non-PoE Receivers will need their own power supply. Receivers of
another brand may not be compatible.
Displaying HDMI 3D and 4K2K contents, equivalent source signal and HDMI
cable are required in order to secure the quality.

8
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
CAT5e/6/7 OUT
IR2
EXTENDER
HDMI IN
DC 48V
IR1
BLASTER
1 3 4 52
1DC 48V: Plug the 48V DC power supply into the unit and connect the
adaptor to an AC outlet.
2IR1 BLASTER: Connect to the supplied IR Blaster cable for IR signal
transmission. Place the IR Blaster in direct line-of-sight of the
equipment to be controlled.
3IR2 EXTENDER: Connect to the supplied IR Extender cables for IR
signal reception. Ensure that remote being used is within the direct
line-of-sight of the IR Extender.
4CAT5e/6/7 OUT: Connect to the Receiver unit with a single CAT5e/6/7
cable for transmission of all data signals.
5HDMI IN: Connect to HDMI source equipment such as a DVD or Blu-
ray player.

9
6.2 Rear Panel
POWER
LINK
RS-232 IN
STDUPDATE
LAN
6 7 8 109
1STD/UPDATE Switch: This switch is reserved for factory use only.
2RS-232 IN: Connect to a PC or Laptop with D-Sub 9-pin male cable for
the transmission of RS-232 commands.
3LAN: Connect to an internet or network system.
4POWER LED: This LED will illuminate when the device is connected to
a power supply.
5LINK LED: This LED will illuminate when both the input source and
output display signals are connected through CAT cable. When it
blinks regularly it states the display is NOT sending signals to Receiver
but the Transmitter and Receiver are linked and if it blinks irregularly it
indicates an error has occurred.

10
6.3. IR Cable Pin Assignment
3
1
3
1
2
2
Power
IR Blaster Signal
NC
IR Blaster
6.4. D-Sub 9 Pin Definitions
Pin Define TX / RX
1N/C
2TxD / RxD
3RxD / TxD
4N/C
5GND
6N/C
7N/C
8N/C
9N/C

11
7. CONNECTION DIAGRAM
RX
TX
CAT5e/6/7 IN
IR1
EXTENDER
HDMI OUT
IR2
BLASTER
POWER
LINK
RS-232 OUT
LAN
STDUPDATE
POWER
LINK
RS-232 IN
STDUPDATE
LAN
CAT5e/6/7 OUT
IR2
EXTENDER
HDMI IN
DC 48V
IR1
BLASTER
1.5m
60°
1.5m
60°
7m
3m 3m
60°
7m
3m
3m
60°
TV or Monitor
RS-232 Equipped
PC or Notebook
RS-232 Equipped
HDMI Switcher
Notebook
DVD or Blu-ray Player
Internet Modem
or Router
Power
Supply
IR Blaster
HDMI
CAT5e/6
RS-232
HDMI
IR Extender
IR Extender
IR Blaster
CAT5e/6
RS-232

12
8. SPECIFICATIONS
Video Bandwidth 340MHz / 10.2Gbps
Transmitter
Inputs 1 x HDMI
1 x IR Extender
1 x RS-232
1 x LAN
Outputs 1 x CAT5e/6/7
1 x IR Blaster
HDMI Resolution HD: 480i~4K2K@24/25/30/50/60 & YUV_420
PC: VGA ~ WUXGA (RB)
HDMI Cable Distance In: 10m/1080p@8-bit or 12-bit and 5m@4K2K
CAT5e/6/7 I/O Cable
Distance
Up to 100m
IR Frequency 30~50kHz
ESD Protection Human Body Model:
±8 kV (air-gap discharge)
±4 kV (contact discharge)
Power Supply 48 V/0.83 A DC (US/EU Standards, CE/FCC/UL
certified)
Dimensions 108mm (W) x 108mm (D) x 25mm (H)
108mm (W) x 116mm (D) x 29mm (H)
Weight 370g/TX, 366g/RX
Chassis Material Metal
Silkscreen Colour Black
Power Consumption 13.5W (Include Receiver)
Operating Temperature 0 °C~40 °C/32 °F ~104 °F
Storage Temperature –20 °C~60 °C/–4 °F~140 °F
Relative Humidity 20~90 % RH (non-condensing)

13
8.1 CAT5e/6/7 Cable Specification
Cable
Type
Range Pixel clock
rate
Video Data
Rate
Supported
Video
CAT5e/6/7 100 m <=225 MHz <=5.3 Gbps
(HD Video)
Up to 1080p, 60
Hz, 36 bits, 3D
(data rates lower
than 5.3 Gbps or
below 225 MHz
TMDS clock).
70 m/CAT5e/6
100 m/CAT7
>225 MHz > 5.3 Gbps
(Ultra HD
Video)
4K2K, 30Hz
video formats

14
8.2 Timing Support Chart
INPUT OUTPUT
640x480@60/72/75/85  
800x600@56/60/72/75/85  
1024x768@60/70/75/85  
1280x720@60  
1280x1024@60  
1600x1200@60  
1920x1200@60rb  
3840x2160p@24/25/30  
4096x2160p@24  
4096x2160p@50/60(yuv_420)  
480i/576i  
480p/576p  
720p@50/60  
1080i@50/60  
1080p@50/60  
1080p@24/25/30  

15
9. ACRONYMS
ACRONYM COMPLETE TERM
CAT5e Category 5 Cable
CAT6 Category 6 Cable
CAT7 Category 7 Cable
CEC Consumer Electronics Control
DVI Digital Visual Interface
HDCP High-bandwidth Digital Content Protection
HDMI High Denition Multimedia Interface
IR Infrared
PD Powered Device
PSE Power Sourcing Equipment

CYP (UK) Ltd., Unit 7, Shepperton Business Park, Govett Avenue, Shepperton,
Middlesex, TW17 8BA
Tel: [phone] | Fax: [phone]
Email: [email protected]
www.cypeurope.com
v1.00