Trivum TouchPad 7“ User manual

trivum technologies GmbH
Eierstraße 48
70199 Stuttgart
[email protected]
www.trivum.com
www.facebook.com/trivumtechnologies
V201704 - Errors and specications subject to change without notice.
Further documentation and troubleshooting
To nd helpful log les in support cases:
– Open the TouchPad Setup Tool.
– Click Reports.
Please visit also our website for the latest documentation,
videos and information:
http://www.trivum.com
http://service.trivum.com
If support is needed
Please contact your local trivum dealer or write to:
[email protected]
Download links:
trivum ServerAdmin Tool (Windows):
http://service.trivum.com/win-admintool
How to update your trivum v8 to v9?
http://service.trivum.com/v9-update
iNote: The remote maintenance of all trivum devices is
activated by default. For disabling remote maintenance:
– Open the MusicCenter WebCong.
– Click Basic Setup.
– Uncheck Enable trivum remote support.
Quick Installation Guide for
TouchPad 7“
1. Mounting 3. MusicCenter binding
– Wait a few seconds until the TouchPad has booted
– On the starting screen press Pair TouchPad with
Audio System
– Press Select... and select your preferred trivum
MusicCenter from the pop-up menu
iNote: If you want to have the full functionality
of your TouchPad 7”please make sure your trivum
multiroom system is running version 9.
How to update: http://service.trivum.com/v9-update
v9
Optimized for:
1
23 45 67 8
Connector TouchPad side
1Wall box 4.3“
2Adapter plate
37“ TouchPad
4Adjustment aid
A
D
B
C
1
2
3
4

Quick Installation Guide for TouchPad 7“
Required components for installation:
– Cat-5 cable
– wall box 4.3“ (dimensions 104x82x62mm)
– PoE Switch
To use the TouchPad in connection with trivum
Multiroom Audio System:
– trivum device(s) (e.g. RP, FLEX, AudioBox, ...)
– network DHCP capable router
– music archive (network share, NAS)
Optional components:
– internet connection (required for software updates and
remote support)
– KNX/IP-Router (required for using the TouchPad as
a KNX room controller)
1. Mounting the TouchPad 7“
1.1 Mount the wall box 4.3“.
1.2 Screw the four short screws with the four distance bolts
on the adapter plate. A
1.3 Adjust the adapter plate in the wall box to set a proper
distance between the TouchPad and the wall. B
1.4 Connect the Cat-5 cable (see illustration
„Connector TouchPad side“ on the backside) and plug in.
1.5 Insert the TouchPad in the wall box. C
lTip: TouchPad 7” is usable in landscape or portrait mode
1.6 The adjustment aid should be positioned so that the
TouchPad is in balance. D
2. Linking the TouchPad to a trivum device
To link the TouchPad to your trivum device:
2.1 Wait a few seconds until the TouchPad has booted.
2.2 On the starting screen press
Pair TouchPad with Audio System.
2.3 Press Select... and select your preferred trivum
MusicCenter from the pop-up menu.
3. Conguring the TouchPad
The trivum TouchPad has to be congured via web browser.
To identify the TouchPads IP please go on the TouchPad:
3.1 Press on the right upper corner trivum.
3.2 Press settings -> Touchpad settings -> Info.
3.3 Open your web browser and type in the IP to open the
trivum TouchPad WebCong
4. Use your TouchPad as music controller
and KNX room controller
Per default the TouchPad is congured as trivum audio
controller without any need for KNX.
If your home has a KNX installation, you can use the
7"TouchPad as a smart KNX room controller. You can add
simply embedded web objects (e.g. weather forecast,
webcams etc.) or KNX objects like dimmer, switches,
shutters etc. via the trivum TouchPad WebCong. The KNX
programming of the TouchPad is done via the web browser.
No need for extra KNX software.
4.1 Open the trivum TouchPad WebCong.
4.2 Click KNX Settings.
4.3 Enable Use KNX/IP.
4.4 Go back to the TouchPad WebCong main page.
4.5 Click Page Editor.
4.6 Move the mouse over the square where you want to
place your button and click the“plus-button”
4.7 Choose your preferred APPS or KNX BUTTONS
4.8 Enter the specic settings for this app or the KNX
group addresses for this KNX button
You nd further informations for KNX on:
http://service.trivum.com/knx
lTip: Tap on the date to quickly switch between the
music view and the KNX view.
lTip: You can set the default mode of the TouchPad
(audio controller / KNX room controller)
– Open the trivum TouchPad Setup Tool.
– Click Basic Setup.
– Enable the checkbox TouchPad mode.
Backup your conguration
Once you have completed the setup, we recommend you
to make a backup of your conguration:
– Open the TouchPad WebCong.
– Click Backup/Restore -> Export/import conguration.
– Follow the instructions.