TROLL nursery LUKAS DRESSER User manual

IMPORTANT
RETAIN FOR FUTURE REFERENCE
READ CAREFULLY
The illustrations in these instructions are to be used as a guide only
Conforms to standard EN 12221-1&2:2008 + A1:2013
Made in Latvia
LUKAS DRESSER

SAFETY INSTRUCTIONS
WARNING!
Your child’s safety is your responsibility.
This changing table is suitable for use by a child up to approximately 12 months old or
maximum weight 15 kg.
Additional or replacement parts should only be supplied by manufacturer or distributor.
table
table
The wall must be checked for suitability during assembly to ensure that the fastening strap
can withstand the forces generated. Appropriate wall fixings must be used.
Do not allow your child to climb on this furniture.
WARNING: Do not leave the child unattended on the changing table.
All assembly fittings shall be correctly tightened and checked regularly.
table 75 55 c
Changing mattress must not exceed 2 cm thickness.
Remove all parts from packaging and check against the parts list.
Do not discard any packaging until you are sure you have all parts and the pack of fittings.
You will find it easier to assemble the if a second adult is available to help you.
Ensure that the is kept away from strong heat sources such as electrical bar,
gas and open fires.
Do not use if any part is broken or missing.
The recommended mattress size for the is x m.
Check regularly to ensure that all the components are secure.
To clean use a damp cloth, avoiding the use of strong detergents or abrasives.
CUSTOMER ENQUIRIES
www.troll.lv

PARTS LIST
13
14
15
16
17
D x 4
L=34xM6
K x 8
38
42 34
1
2
3
4
5
6
7
8
18
8

F x 1 I x 2 G x 5 H
11
11
12
10
9
PARTS LIST

8
4
4
10
6
10
D x 4
L=34xM6
1
2
8
18
8
7
4
5
6
D
D
D
3
1
2

K x 8
3

5
x 3
24 24
24
17 13
16
15
14
4

1H
11
11
12
10
9
OR

1.
2.
I x 2
F x 1
G x 5

First place in position. Mark position of cent top on wall.re
Attach fixing strap supplied to position on wall as shown. Ensure correct screws
and fittings as appropriate to the type of wall are used. Check the wall is suitable
for attaching this furniture.
Using the wood screw and washer supplied attach fixing strap to the underside
of top panel.
WARNING:
Ensure strap is attached secur ly at both ends to avoid danger of furniture tippinge
forwards.
This installation should only be carried out by a competent person. Incorrect
installation could present a danger.
Check the wall is suitable for attachment and will withstand the forces generated
by furniture tipping forward.
WALL ATTACHMENT INSTRUCTIONS

First place in position. Mark position of cent top on wall.re
Attach fixing strap supplied to position on wall as shown. Ensure correct screws
and fittings as appropriate to the type of wall are used. Check the wall is suitable
for attaching this furniture.
Using the wood screw and washer supplied attach fixing strap to the underside
of top panel.
WARNING:
Ensure strap is attached secur ly at both ends to avoid danger of furniture tippinge
forwards.
This installation should only be carried out by a competent person. Incorrect
installation could present a danger.
Check the wall is suitable for attachment and will withstand the forces generated
by furniture tipping forward.
WALL ATTACHMENT INSTRUCTIONS
7,5cm