TROLL nursery SUN BEDSIDE CRIB User manual

SUN BEDSIDE CRIB
The illustrations in these instructions are to be used as a guide only
Conforms to BS EN 1130:1997
Made in Latvia
IMPORTANT
RETAIN FOR FUTURE REFERENCE
READ CAREFULLY

SAFETY INSTRUCTIONS
Your child’s safety is your responsibility.
F
crib
Designed for an infant having a maximum weight of 9 kg
Furniture can be dangerous if incorrectly installed. Assembly should be carried out by a
competent person.
Keep children clear during assembly as pack contains small parts which may present a
choking hazard.
The crib should be placed on a horizontal floor.
Young children should not be allowed to play in the vicinity of the mini crib.
All assembly fittings should always be tightened properly and care should be taken that no
screws are loose, because a child could trap parts of the body or clothing (eg. Necklaces,
strings, ribbons for dummies etc) which would pose a risk of strangulation.
crib
crib
ollow the manufacturer’s assembly instructions in detail to ensure the safety features
of the crib are not compromised.
Remove any tools or excess parts including plastic packaging from the cradle vicinity
after its assembly.
Any padding and cushioning materials, including the mattress, need to be sufficiently firm
to preclude conforming to the contours of the infant’s face.
Do not position the infant face-down into the mattress.
Ensure that proper ventilation is maintained in and around the crib by limiting bed clothes,
extra pillows or toys.
Ensure the crib is placed at a reasonable distance from curtains, blinds, heaters and
power points.
Keep medication, string, elastic, small toys or small items such as money out of reach
from any position in the crib.
Be aware that ribbons or lace associated with bedding may entangle the infant.
Remove all parts from packaging and check against the parts list.
Do not discard any packaging until you are sure you have all parts and the pack of fittings.
You will find it easier to assemble the if a second adult is available to help you.
Ensure that the is kept away from strong heat sources such as electrical bar,
gas and open fires.
One end of the has a mark indicating the height of the mattress.

crib
mini crib
Do not use more than one mattress.
: 38 89
CAUTION: RECOMMENDED MATTRESS SIZE. IT IS RECOMMENDED THAT THE
MATTRESS USED IN THIS CRIB BE A SNUG FIT AND NOT EXCEED
75 MM IN THICKNESS.
WARNING: Always ensure the dropside is in the highest position if you are leaving the child
unattended in the crib.
When your child is able to sit, kneel or to pull itself up, the crib shall not be used anymore
for this child.
Ensure the crib is positioned away from any cords on blinds or curtains to avoid risk of
entanglement.
Do not use if any part is broken or missing.
Do not leave anything (toys etc) in the which could provide a footrest or present a danger
of suffocation or strangulation.
The recommended mattress size x cm.
Check regularly to ensure that all the components are secure.
To clean use a damp cloth, avoiding the use of strong detergents or abrasives.
CUSTOMER ENQUIRIES
Manufacturer:
SIA Troll Smiltene,
Rigas street 18,
Smiltene, LV-4729,
Latvia
www.troll.lv
Australian distributor:
Danish by Design,
PO Box 1543 Black Rock VIC 3193.
www.danishbydesign.com.au

PARTS LIST
FITTINGS LIST
TOOLS REQUIRED
1
22
33
4
5
677
89
10
11

ASSEMBLING
Adjust the wheel
runners so that
the drop side run
smoothly.
Choose one of the
height positions of
the crib.
Attach the wheels.
Mark indicating the
maximum height of
the mattress.
1
22
33
4
5
6
77
89
10
11