Tronfy TB-41 Datasheet

TRONFY
Wireless Headset
For work and driving calls
TB-41 Using Instruction

Product Overview

Status indicator
Instruction
LED status
Voice
prompts
Power on
/
Power on
Power off
/
power off
Pairing
Red and Blue
alternately
Pairing
Standby
Blink blue every
10 seconds
/
Incoming
call
Flashes red continuous
phone
number
Battery
low
Flashes blue every
8 seconds
Battery low
Charging
Stays on Red while
charging; Stays on Blue
after full charged
/

Basic operation
Power on / off
Slide ON / OFF key to power on / off the Bluetooth
headset
Pairing
Pairing one phone
1. Slide “ON”key, you hear “Power on”. The
Bluetooth headset will go in to pairing mode
automatically after 5-10 seconds, the LED
indicator shows blue and red alternately, you
hear “Pairing”.
2. Active Bluetooth on your phone and set it to
search for new devices.
3. Select “TB-41”. If you phone asks, enter 0000
(four zeros) for the passcode or accept the
connection. The LED indicator stops flashing

Blue and Red once successfully paired, you hear
“phone one connected”.
Pair another phone
Multipoint technology enables you to pair another
phone and take a call from either.
Turn off the first phone Bluetooth, than follow the
steps for “pair one phone”to pair with another
mobile phone. After pairing successfully, restart the
headset to connect to 2 paired mobile phone
automatically.

Call
Answer a call
Press the Multifunction button once.
Reject a call
Press and hold the Multifunction button for about 2
seconds.
End a call
Press the Multifunction button once.
Redial the last call
Double-press the Multifunction button in standby
mode. The mobile phone will redial the last call
number.
End current call and answer new call
When a new call rings during a call, press the
Multifunction button once to answer new call and
end current call simultaneously.

On hold current call and answer new call
When a new call rings during a call, hold the
Multifunction button for 2 seconds to hold current
call and answer new call. To switch between held call
and active call, hold the Multifunction button 2
seconds.

Music
Music play / pause
Press Multifunction button once to play / pause music.
(Some phones may require you to start a media
player first)
Track back / forward
Press the Volume “+”for 2 seconds once to skip track
forward, press Volume “-”for 2 seconds once to skip
track backward.
Switch Music and Call
When a call rings during a music playing, the music
automatically pauses to allow you to answer or ignore
the call. Once the call is ignored or ends, the music is
resumed.

More features
Battery Indicator
When the headset is connected to a device with iOS
system, a battery indicator will appear at the upper
right of the system, indicating battery status of the
headset.

Auto power-off
When the distance between the headset and the
mobile phone is beyond effective range, a voice
prompt “Connection lost”and headset disconnects
with the mobile phone, the headset will power off
automatically once no active for 10 minutes.
Automatic connection after powering on
When the headset and phone have been paired once,
they will automatically connect when the headset is
on and Bluetooth is activated on the phone.

Charging
Your headset has enough power to complete the
pairing and a few calls. When battery is low, your will
hear the voice prompt “Battery low”. It takes 3 hours
to fully charge the headset. The red LED turns on
during charging. The red LED will turn off and the blue
LED will turn on after being fully charged.
Note: The lifetime of the battery will be significantly
reduced if your headset is left uncharged for along
period. We recommend that you recharge your
headset at least once a month.