tronical TronicalTune User manual

SCOPE OF DELIVERY PREPARATION INSTALLATION
READY TO STRING UP DOWNLOAD MANUAL
6 x
1 x CONTAC TING PCB
1xLiPo BAT TERY
1 x
7 x LO C K NUT S & RING WASHERS
1 x WRENCH
1 x QUICK START GUIDE PARTS OF YOUR GUITAR.
PLACE THE CONTACTING PCB ON THE NECK
OF THE GUITAR, THE BATTERY COMPARTMENT
STOCK .
MAKE SURE THAT ALL PCB DRILL HOLES ARE
PUT THE THROUGH THE
RESPECTIVE HOLES.
BATTERY
COMPARTMENT
ROBOHEAD PIN
TIGHTEN THE HEX NUTS ALL THE WAY DOWN
BY HAND.
NOW MOVE THE UNIT SLIGHTLY BACK & FORTH
TO FIND THE SWEET SPOT, THEN FIX THE LOCK
NUTS CROSSWISE WITH THE SUPPLIED WRENCH
m
CAUTION: THE STICKER HAS TO FACE UPWARDS.
THE LOCKING SHAPE HAS TO BE INSERTED INTO
THE ELECTRONIC B OX UNTIL IT ENGAGES
DO NOT APPLY ANY FORCE TO INSERT!
NOW TRONICALTUNE IS READY TO STRING UP
YOUR GUITAR. PLEASE DOWNLOAD THE MANUAL
AND FOLLOW THE INSTRUCTIONS.
WRENCH
HEX NUT
LOCK NUT
NOTE: D O N OT USE ANY TOOLS TO
FIX THE LOCK NUT, USE A1 CENT COIN
TO T IGHTEN I T OTHER WIS E YOU MAY
DAMAG E T H E GEAR WHEEL S !
USE ONLY SUPPLIED WRENCH
TO TIGHTEN T H E HEX NUT.
BATTERY
COMPARTMENT
BATTERY THIS
SIDE UP!
STICKER
Download TRONICALTUNE Manual for
detailed instructions and important safety warnings.
www.tronical.com/downloads
Tronical-Components GmbH • Heselstücken 18
22453 Hamburg Germany
© Copyright 2013 Tronical Components GmbH.
All rights reserved.
BAT
E
TURN ON/OFF

SCOPE OF DELIVERY PREPARATION INSTALLATION
READY TO STRING UP DOWNLOAD MANUAL
6 x
1 x CONTAC TING PCB
1xLiPo BATTERY
1 x
7 x LO C K NUTS & RING WASHERS
1 x WRENCH
1 x QUICK START GUIDE PARTS OF YOUR GUITAR.
PLACE THE CONTACTING PCB ON THE NECK
OF THE GUITAR, THE BAT TERY COMPARTMENT
STOCK .
MAKE SURE THAT ALL PCB DRILL HOLES ARE
PUT THE THROUGH THE
RESPECTIVE HOLES.
BATTERY
COMPARTMENT
ROBOHEAD PIN
TIGHTEN THE HEX NUTS ALL THE WAY DOWN
BY HAND.
NOW MOVE THE UNIT SLIGHTLY BACK & FORTH
TO FIND THE SWEET SPOT, THEN FIX THE LOCK
NUTS CROSSWISE WITH THE SUPPLIED WRENCH
m
CAUTION: THE STICKER HAS TO FACE UPWARDS.
THE LOCKING SHAPE HAS TO B E INSERTED INTO
THE ELECTR ONIC BOX UNTIL IT ENGAGES
DO NOT APPLY ANY FORCE TO INSERT!
NOW TRONICALTUNE IS READY TO STRING UP
YOUR GUITAR. PLEASE DOWNLOAD THE MANUAL
AND FOLLOW THE INSTRUCTIONS.
WRENCH
HEX NUT
LOCK NUT
NOTE: D O N OT USE A NY TOOLS TO
FIX THE LOCK NUT, USE A1 CENT COIN
TO T IGHTEN I T OT H E RWISE YO U M AY
DAMAG E T H E GEAR WHEELS!
USE ONLY SUPPLIED WRENCH
TO TIGHTEN T H E HEX NUT.
BATTERY
COMPARTMENT
BATTERY THIS
SIDE UP!
STICKER
Download TRONICALTUNE Manual for
detailed instructions and important safety warnings.
www.tronical.com/downloads
Tronical-Components GmbH • Heselstücken 18
22453 Hamburg Germany
© Copyright 2013 Tronical Components GmbH.
All rights reserved.
BAT
E
TURN ON/OFF

SCOPE OF DELIVERY PREPARATION INSTALLATION
READY TO STRING UP DOWNLOAD MANUAL
6 x
1 x CONTAC TING PCB
1xLiPo BATTERY
1 x
7 x LO C K NUTS & RING WASHERS
1 x WRENCH
1 x QUICK START GUIDE PARTS OF YOUR GUITAR.
PLACE THE CONTACTING PCB ON THE NECK
OF THE GUITAR, THE BAT TERY COMPARTMENT
STOCK .
MAKE SURE THAT ALL PCB DRILL HOLES ARE
PUT THE THROUGH THE
RESPECTIVE HOLES.
BATTERY
COMPARTMENT
ROBOHEAD PIN
TIGHTEN THE HEX NUTS ALL THE WAY DOWN
BY HAND.
NOW MOVE THE UNIT SLIGHTLY BACK & FORTH
TO FIND THE SWEET SPOT, THEN FIX THE LOCK
NUTS CROSSWISE WITH THE SUPPLIED WRENCH
m
CAUTION: THE STICKER HAS TO FACE UPWARDS.
THE LOCKING SHAPE HAS TO B E INSERTED INTO
THE ELECTR ONIC BOX UNTIL IT ENGAGES
DO NOT APPLY ANY FORCE TO INSERT!
NOW TRONICALTUNE IS READY TO STRING UP
YOUR GUITAR. PLEASE DOWNLOAD THE MANUAL
AND FOLLOW THE INSTRUCTIONS.
WRENCH
HEX NUT
LOCK NUT
NOTE: D O N OT USE A NY TOOLS TO
FIX THE LOCK NUT, USE A1 CENT COIN
TO T IGHTEN I T OT H E RWISE YO U M AY
DAMAG E T H E GEAR WHEELS!
USE ONLY SUPPLIED WRENCH
TO TIGHTEN T H E HEX NUT.
BATTERY
COMPARTMENT
BATTERY THIS
SIDE UP!
STICKER
Download TRONICALTUNE Manual for
detailed instructions and important safety warnings.
www.tronical.com/downloads
Tronical-Components GmbH • Heselstücken 18
22453 Hamburg Germany
© Copyright 2013 Tronical Components GmbH.
All rights reserved.
BAT
E
TURN ON/OFF

SCOPE OF DELIVERY PREPARATION INSTALLATION
READY TO STRING UP DOWNLOAD MANUAL
6 x
1 x CONTAC TING PCB
1xLiPo BATTERY
1 x
7 x LO C K NUTS & RING WASHERS
1 x WRENCH
1 x QUICK START GUIDE PARTS OF YOUR GUITAR.
PLACE THE CONTACTING PCB ON THE NECK
OF THE GUITAR, THE BAT TERY COMPARTMENT
STOCK .
MAKE SURE THAT ALL PCB DRILL HOLES ARE
PUT THE THROUGH THE
RESPECTIVE HOLES.
BATTERY
COMPARTMENT
ROBOHEAD PIN
TIGHTEN THE HEX NUTS ALL THE WAY DOWN
BY HAND.
NOW MOVE THE UNIT SLIGHTLY BACK & FORTH
TO FIND THE SWEET SPOT, THEN FIX THE LOCK
NUTS CROSSWISE WITH THE SUPPLIED WRENCH
m
CAUTION: THE STICKER HAS TO FACE UPWARDS.
THE LOCKING SHAPE HAS TO B E INSERTED INTO
THE ELECTR ONIC BOX UNTIL IT ENGAGES
DO NOT APPLY ANY FORCE TO INSERT!
NOW TRONICALTUNE IS READY TO STRING UP
YOUR GUITAR. PLEASE DOWNLOAD THE MANUAL
AND FOLLOW THE INSTRUCTIONS.
WRENCH
HEX NUT
LOCK NUT
NOTE: D O N OT USE A NY TOOLS TO
FIX THE LOCK NUT, USE A1 CENT COIN
TO T IGHTEN I T OT H E RWISE YO U M AY
DAMAG E T H E GEAR WHEELS!
USE ONLY SUPPLIED WRENCH
TO TIGHTEN T H E HEX NUT.
BATTERY
COMPARTMENT
BATTERY THIS
SIDE UP!
STICKER
Download TRONICALTUNE Manual for
detailed instructions and important safety warnings.
www.tronical.com/downloads
Tronical-Components GmbH • Heselstücken 18
22453 Hamburg Germany
© Copyright 2013 Tronical Components GmbH.
All rights reserved.
BAT
E
TURN ON/OFF

SCOPE OF DELIVERY PREPARATION INSTALLATION
READY TO STRING UP DOWNLOAD MANUAL
6 x
1 x CONTAC TING PCB
1xLiPo BAT TERY
1 x
7 x LO C K NUT S & RING WASHERS
1 x WRENCH
1 x QUICK START GUIDE PARTS OF YOUR GUITAR.
PLACE THE CONTACTING PCB ON THE NECK
OF THE GUITAR, THE BATTERY COMPAR TMENT
STOCK .
MAKE SURE THAT ALL PCB DRILL HOLES ARE
PUT THE THROUGH THE
RESPECTIVE HOLES.
BATTERY
COMPARTMENT
ROBOHEAD PIN
TIGHTEN THE HEX NUTS ALL THE WAY DOWN
BY HAND.
NOW MOVE THE UNIT SLIGHTLY BACK & FORTH
TO FIND THE SWEET SPOT, THEN FIX THE LOCK
NUTS CROSSWISE WITH THE SUPPLIED WRENCH
m
CAUTION: THE STICKER HAS TO FACE UPWARDS.
THE LOCKING SHAPE HAS TO B E INSERTED INTO
THE ELECTR ONIC BOX UNTIL IT ENGAGES
DO NOT APPLY ANY FORCE TO INSERT!
NOW TRONICALTUNE IS READY TO STRING UP
YOUR GUITAR. PLEASE DOWNLOAD THE MANUAL
AND FOLLOW THE INSTRUCTIONS.
WRENCH
HEX NUT
LOCK NUT
NOTE: D O N OT USE ANY TOOLS TO
FIX THE LOCK NUT, USE A1 CENT COIN
TO T IGHTEN I T OTHE R WIS E YOU MAY
DAMAG E T H E GEAR WHEEL S!
USE ONLY SUPPLIED WRENCH
TO TIGHTEN T H E HEX NUT.
BATTERY
COMPARTMENT
BATTERY THIS
SIDE UP!
STICKER
Download TRONICALTUNE Manual for
detailed instructions and important safety warnings.
www.tronical.com/downloads
Tronical-Components GmbH • Heselstücken 18
22453 Hamburg Germany
© Copyright 2013 Tronical Components GmbH.
All rights reserved.
BAT
E
TURN ON/OFF

SCOPE OF DELIVERY PREPARATION INSTALLATION
READY TO STRING UP DOWNLOAD MANUAL
6 x
1 x CONTAC TING PCB
1xLiPo BAT TERY
1 x
7 x LO C K NUT S & RING WASHERS
1 x WRENCH
1 x QUICK START GUIDE PARTS OF YOUR GUITAR.
PLACE THE CONTACTING PCB ON THE NECK
OF THE GUITAR, THE BATTERY COMPARTMENT
STOCK .
MAKE SURE THAT ALL PCB DRILL HOLES ARE
PUT THE THROUGH THE
RESPECTIVE HOLES.
BATTERY
COMPARTMENT
ROBOHEAD PIN
TIGHTEN THE HEX NUTS ALL THE WAY DOWN
BY HAND.
NOW MOVE THE UNIT SLIGHTLY BACK & FORTH
TO FIND THE SWEET SPOT, THEN FIX THE LOCK
NUTS CROSSWISE WITH THE SUPPLIED WRENCH
m
CAUTION: THE STICKER HAS TO FACE UPWARDS.
THE LOCKING SHAPE HAS TO BE INSERTED INTO
THE ELECTRONIC B OX UNTIL IT ENGAGES
DO NOT APPLY ANY FORCE TO INSERT!
NOW TRONICALTUNE IS READY TO STRING UP
YOUR GUITAR. PLEASE DOWNLOAD THE MANUAL
AND FOLLOW THE INSTRUCTIONS.
WRENCH
HEX NUT
LOCK NUT
NOTE: D O N OT USE ANY TOOLS TO
FIX THE LOCK NUT, USE A1 CENT COIN
TO T IGHTEN I T OTHER WIS E YOU MAY
DAMAG E T H E GEAR WHEEL S !
USE ONLY SUPPLIED WRENCH
TO TIGHTEN T H E HEX NUT.
BATTERY
COMPARTMENT
BATTERY THIS
SIDE UP!
STICKER
Download TRONICALTUNE Manual for
detailed instructions and important safety warnings.
www.tronical.com/downloads
Tronical-Components GmbH • Heselstücken 18
22453 Hamburg Germany
© Copyright 2013 Tronical Components GmbH.
All rights reserved.
BAT
E
TURN ON/OFF

SCOPE OF DELIVERY PREPARATION INSTALLATION
READY TO STRING UP DOWNLOAD MANUAL
6 x
1 x CONTAC TING PCB
1xLiPo BATTERY
1 x
7 x LO C K NUTS & RING WASHERS
1 x WRENCH
1 x QUICK START GUIDE PARTS OF YOUR GUITAR.
PLACE THE CONTACTING PCB ON THE NECK
OF THE GUITAR, THE BAT TERY COMPARTMENT
STOCK .
MAKE SURE THAT ALL PCB DRILL HOLES ARE
PUT THE THROUGH THE
RESPECTIVE HOLES.
BATTERY
COMPARTMENT
ROBOHEAD PIN
TIGHTEN THE HEX NUTS ALL THE WAY DOWN
BY HAND.
NOW MOVE THE UNIT SLIGHTLY BACK & FORTH
TO FIND THE SWEET SPOT, THEN FIX THE LOCK
NUTS CROSSWISE WITH THE SUPPLIED WRENCH
m
CAUTION: THE STICKER HAS TO FACE UPWARDS.
THE LOCKING SHAPE HAS TO B E INSERTED INTO
THE ELECTR ONIC BOX UNTIL IT ENGAGES
DO NOT APPLY ANY FORCE TO INSERT!
NOW TRONICALTUNE IS READY TO STRING UP
YOUR GUITAR. PLEASE DOWNLOAD THE MANUAL
AND FOLLOW THE INSTRUCTIONS.
WRENCH
HEX NUT
LOCK NUT
NOTE: D O N OT USE A NY TOOLS TO
FIX THE LOCK NUT, USE A1 CENT COIN
TO T IGHTEN I T OT H E RWISE YO U M AY
DAMAG E T H E GEAR WHEELS!
USE ONLY SUPPLIED WRENCH
TO TIGHTEN T H E HEX NUT.
BATTERY
COMPARTMENT
BATTERY THIS
SIDE UP!
STICKER
Download TRONICALTUNE Manual for
detailed instructions and important safety warnings.
www.tronical.com/downloads
Tronical-Components GmbH • Heselstücken 18
22453 Hamburg Germany
© Copyright 2013 Tronical Components GmbH.
All rights reserved.
BAT
E
TURN ON/OFF

SCOPE OF DELIVERY PREPARATION INSTALLATION
READY TO STRING UP DOWNLOAD MANUAL
6 x
1 x CONTAC TING PCB
1xLiPo BATTERY
1 x
7 x LO C K NUTS & RING WASHERS
1 x WRENCH
1 x QUICK START GUIDE PARTS OF YOUR GUITAR.
PLACE THE CONTACTING PCB ON THE NECK
OF THE GUITAR, THE BAT TERY COMPARTMENT
STOCK .
MAKE SURE THAT ALL PCB DRILL HOLES ARE
PUT THE THROUGH THE
RESPECTIVE HOLES.
BATTERY
COMPARTMENT
ROBOHEAD PIN
TIGHTEN THE HEX NUTS ALL THE WAY DOWN
BY HAND.
NOW MOVE THE UNIT SLIGHTLY BACK & FORTH
TO FIND THE SWEET SPOT, THEN FIX THE LOCK
NUTS CROSSWISE WITH THE SUPPLIED WRENCH
m
CAUTION: THE STICKER HAS TO FACE UPWARDS.
THE LOCKING SHAPE HAS TO B E INSERTED INTO
THE ELECTR ONIC BOX UNTIL IT ENGAGES
DO NOT APPLY ANY FORCE TO INSERT!
NOW TRONICALTUNE IS READY TO STRING UP
YOUR GUITAR. PLEASE DOWNLOAD THE MANUAL
AND FOLLOW THE INSTRUCTIONS.
WRENCH
HEX NUT
LOCK NUT
NOTE: D O N OT USE A NY TOOLS TO
FIX THE LOCK NUT, USE A1 CENT COIN
TO T IGHTEN I T OT H E RWISE YO U M AY
DAMAG E T H E GEAR WHEELS!
USE ONLY SUPPLIED WRENCH
TO TIGHTEN T H E HEX NUT.
BATTERY
COMPARTMENT
BATTERY THIS
SIDE UP!
STICKER
Download TRONICALTUNE Manual for
detailed instructions and important safety warnings.
www.tronical.com/downloads
Tronical-Components GmbH • Heselstücken 18
22453 Hamburg Germany
© Copyright 2013 Tronical Components GmbH.
All rights reserved.
BAT
E
TURN ON/OFF

SCOPE OF DELIVERY PREPARATION INSTALLATION
READY TO STRING UP DOWNLOAD MANUAL
6 x
1 x CONTAC TING PCB
1xLiPo BATTERY
1 x
7 x LO C K NUTS & RING WASHERS
1 x WRENCH
1 x QUICK START GUIDE PARTS OF YOUR GUITAR.
PLACE THE CONTACTING PCB ON THE NECK
OF THE GUITAR, THE BAT TERY COMPARTMENT
STOCK .
MAKE SURE THAT ALL PCB DRILL HOLES ARE
PUT THE THROUGH THE
RESPECTIVE HOLES.
BATTERY
COMPARTMENT
ROBOHEAD PIN
TIGHTEN THE HEX NUTS ALL THE WAY DOWN
BY HAND.
NOW MOVE THE UNIT SLIGHTLY BACK & FORTH
TO FIND THE SWEET SPOT, THEN FIX THE LOCK
NUTS CROSSWISE WITH THE SUPPLIED WRENCH
m
CAUTION: THE STICKER HAS TO FACE UPWARDS.
THE LOCKING SHAPE HAS TO B E INSERTED INTO
THE ELECTR ONIC BOX UNTIL IT ENGAGES
DO NOT APPLY ANY FORCE TO INSERT!
NOW TRONICALTUNE IS READY TO STRING UP
YOUR GUITAR. PLEASE DOWNLOAD THE MANUAL
AND FOLLOW THE INSTRUCTIONS.
WRENCH
HEX NUT
LOCK NUT
NOTE: D O N OT USE A NY TOOLS TO
FIX THE LOCK NUT, USE A1 CENT COIN
TO T IGHTEN I T OT H E RWISE YO U M AY
DAMAG E T H E GEAR WHEELS!
USE ONLY SUPPLIED WRENCH
TO TIGHTEN T H E HEX NUT.
BATTERY
COMPARTMENT
BATTERY THIS
SIDE UP!
STICKER
Download TRONICALTUNE Manual for
detailed instructions and important safety warnings.
www.tronical.com/downloads
Tronical-Components GmbH • Heselstücken 18
22453 Hamburg Germany
© Copyright 2013 Tronical Components GmbH.
All rights reserved.
BAT
E
TURN ON/OFF

SCOPE OF DELIVERY PREPARATION INSTALLATION
READY TO STRING UP DOWNLOAD MANUAL
6 x
1 x CONTAC TING PCB
1xLiPo BAT TERY
1 x
7 x LO C K NUT S & RING WASHERS
1 x WRENCH
1 x QUICK START GUIDE PARTS OF YOUR GUITAR.
PLACE THE CONTACTING PCB ON THE NECK
OF THE GUITAR, THE BATTERY COMPAR TMENT
STOCK .
MAKE SURE THAT ALL PCB DRILL HOLES ARE
PUT THE THROUGH THE
RESPECTIVE HOLES.
BATTERY
COMPARTMENT
ROBOHEAD PIN
TIGHTEN THE HEX NUTS ALL THE WAY DOWN
BY HAND.
NOW MOVE THE UNIT SLIGHTLY BACK & FORTH
TO FIND THE SWEET SPOT, THEN FIX THE LOCK
NUTS CROSSWISE WITH THE SUPPLIED WRENCH
m
CAUTION: THE STICKER HAS TO FACE UPWARDS.
THE LOCKING SHAPE HAS TO B E INSERTED INTO
THE ELECTR ONIC BOX UNTIL IT ENGAGES
DO NOT APPLY ANY FORCE TO INSERT!
NOW TRONICALTUNE IS READY TO STRING UP
YOUR GUITAR. PLEASE DOWNLOAD THE MANUAL
AND FOLLOW THE INSTRUCTIONS.
WRENCH
HEX NUT
LOCK NUT
NOTE: D O N OT USE ANY TOOLS TO
FIX THE LOCK NUT, USE A1 CENT COIN
TO T IGHTEN I T OTHE R WIS E YOU MAY
DAMAG E T H E GEAR WHEEL S!
USE ONLY SUPPLIED WRENCH
TO TIGHTEN T H E HEX NUT.
BATTERY
COMPARTMENT
BATTERY THIS
SIDE UP!
STICKER
Download TRONICALTUNE Manual for
detailed instructions and important safety warnings.
www.tronical.com/downloads
Tronical-Components GmbH • Heselstücken 18
22453 Hamburg Germany
© Copyright 2013 Tronical Components GmbH.
All rights reserved.
BAT
E
TURN ON/OFF