tronical TronicalTune 6 in line User manual

ASSEMBLY INSTRUCTIONASSEMBLY INSTRUCTION
SCOPE OF DELIVERY PREPARATION INSTALLATION
READY TO STRING UP DOWNLOAD MANUAL
6 xROBO-HEADS
1 xCONTACTING PCB
1 xLiPo BATTERY
1 xCHARGER INCL. WALL-PLUG
7 xLOCK NUTS & RING WASHERS
1 xWRENCH
1 xQUICK START GUIDE
AT FIRST REMOVE ALL ORIGINAL HEADSTOCK
PARTS OF YOUR GUITAR.
PLACE THE CONTACTING PCB ON THE NECK
OF THE GUITAR, THE BATTERY COMPARTMENT
HAS TO FACE TOWARDS THE TOP OF THE HEAD
STOCK.
MAKE SURE THAT ALL PCB DRILL HOLES ARE
IN ALIGNMENT WITH THE NECKS TUNER HOLES.
PUT THE ROBOHEADPINS THROUGH THE
RESPECTIVE HOLES.
BATTERY COMPARTMENT
ROBOHEAD PIN
MOUNT THE RING WASHERS & HEXNUTS.
TIGHTEN THE HEX NUTS ALL THE WAY DOWN
BY HAND.
NOW MOVE THE UNIT SLIGHTLY BACK & FORTH
TO FIND THE SWEET SPOT, THEN FIX THE LOCK
NUTS CROSSWISE WITH THE SUPPLIED WRENCH
APPROX. 1.51.8 Nm.
CAUTION: THE STICKER HAS TO FACE UPWARDS.
THE LOCKING SHAPE HAS TO BE INSERTED INTO
THE ELECTRONIC BOX UNTIL IT ENGAGES
CLICK. DO NOT APPLY ANY FORCE TO INSERT!
NOW TRONICALTUNE IS READY TO STRING UP
YOUR GUITAR. PLEASE DOWNLOAD THE MANUAL
AND FOLLOW THE INSTRUCTIONS.
WRENCH
HEX NUT LOCK NUT
NOTE: DO NOT USE ANY TOOLS TO
FIX THE LOCK NUT USE A 1 CENT COIN
TO TIGHTEN IT, OTHERWISE YOU MAY
DAMAGE THE GEAR WHEELS!
USE ONLY SUPPLIED WRENCH
TO TIGHTEN THE HEX NUT.
BATTERY
COMPARTMENT
BATTERY THIS
SIDE UP!
STICKER
Download TRONICALTUNE Manual for
detailed instructions and important safty warnings.
www.tronical.com/downloads
Tronical-Components GmbH • Heselstücken 18
22453 Hamburg Germany
© Copyright 2013 Tronical Components GmbH.
All rights reserved.
TURN ON/OFF

ASSEMBLY INSTRUCTIONASSEMBLY INSTRUCTION
SCOPE OF DELIVERY PREPARATION INSTALLATION
READY TO STRING UP DOWNLOAD MANUAL
6 xROBO-HEADS
1 xCONTACTING PCB
1 xLiPo BATTERY
1 xCHARGER INCL. WALL-PLUG
7 xLOCK NUTS & RING WASHERS
1 xWRENCH
1 xQUICK START GUIDE
AT FIRST REMOVE ALL ORIGINAL HEADSTOCK
PARTS OF YOUR GUITAR.
PLACE THE CONTACTING PCB ON THE NECK
OF THE GUITAR, THE BATTERY COMPARTMENT
HAS TO FACE TOWARDS THE TOP OF THE HEAD
STOCK.
MAKE SURE THAT ALL PCB DRILL HOLES ARE
IN ALIGNMENT WITH THE NECKS TUNER HOLES.
PUT THE ROBOHEADPINS THROUGH THE
RESPECTIVE HOLES.
BATTERY COMPARTMENT
ROBOHEAD PIN
MOUNT THE RING WASHERS & HEXNUTS.
TIGHTEN THE HEX NUTS ALL THE WAY DOWN
BY HAND.
NOW MOVE THE UNIT SLIGHTLY BACK & FORTH
TO FIND THE SWEET SPOT, THEN FIX THE LOCK
NUTS CROSSWISE WITH THE SUPPLIED WRENCH
APPROX. 1.51.8 Nm.
CAUTION: THE STICKER HAS TO FACE UPWARDS.
THE LOCKING SHAPE HAS TO BE INSERTED INTO
THE ELECTRONIC BOX UNTIL IT ENGAGES
CLICK. DO NOT APPLY ANY FORCE TO INSERT!
NOW TRONICALTUNE IS READY TO STRING UP
YOUR GUITAR. PLEASE DOWNLOAD THE MANUAL
AND FOLLOW THE INSTRUCTIONS.
WRENCH
HEX NUT LOCK NUT
NOTE: DO NOT USE ANY TOOLS TO
FIX THE LOCK NUT USE A 1 CENT COIN
TO TIGHTEN IT, OTHERWISE YOU MAY
DAMAGE THE GEAR WHEELS!
USE ONLY SUPPLIED WRENCH
TO TIGHTEN THE HEX NUT.
BATTERY
COMPARTMENT
BATTERY THIS
SIDE UP!
STICKER
Download TRONICALTUNE Manual for
detailed instructions and important safty warnings.
www.tronical.com/downloads
Tronical-Components GmbH • Heselstücken 18
22453 Hamburg Germany
© Copyright 2013 Tronical Components GmbH.
All rights reserved.
TURN ON/OFF

ASSEMBLY INSTRUCTIONASSEMBLY INSTRUCTION
SCOPE OF DELIVERY PREPARATION INSTALLATION
READY TO STRING UP DOWNLOAD MANUAL
6 xROBO-HEADS
1 xCONTACTING PCB
1 xLiPo BATTERY
1 xCHARGER INCL. WALL-PLUG
7 xLOCK NUTS & RING WASHERS
1 xWRENCH
1 xQUICK START GUIDE
AT FIRST REMOVE ALL ORIGINAL HEADSTOCK
PARTS OF YOUR GUITAR.
PLACE THE CONTACTING PCB ON THE NECK
OF THE GUITAR, THE BATTERY COMPARTMENT
HAS TO FACE TOWARDS THE TOP OF THE HEAD
STOCK.
MAKE SURE THAT ALL PCB DRILL HOLES ARE
IN ALIGNMENT WITH THE NECKS TUNER HOLES.
PUT THE ROBOHEADPINS THROUGH THE
RESPECTIVE HOLES.
BATTERY COMPARTMENT
ROBOHEAD PIN
MOUNT THE RING WASHERS & HEXNUTS.
TIGHTEN THE HEX NUTS ALL THE WAY DOWN
BY HAND.
NOW MOVE THE UNIT SLIGHTLY BACK & FORTH
TO FIND THE SWEET SPOT, THEN FIX THE LOCK
NUTS CROSSWISE WITH THE SUPPLIED WRENCH
APPROX. 1.51.8 Nm.
CAUTION: THE STICKER HAS TO FACE UPWARDS.
THE LOCKING SHAPE HAS TO BE INSERTED INTO
THE ELECTRONIC BOX UNTIL IT ENGAGES
CLICK. DO NOT APPLY ANY FORCE TO INSERT!
NOW TRONICALTUNE IS READY TO STRING UP
YOUR GUITAR. PLEASE DOWNLOAD THE MANUAL
AND FOLLOW THE INSTRUCTIONS.
WRENCH
HEX NUT LOCK NUT
NOTE: DO NOT USE ANY TOOLS TO
FIX THE LOCK NUT USE A 1 CENT COIN
TO TIGHTEN IT, OTHERWISE YOU MAY
DAMAGE THE GEAR WHEELS!
USE ONLY SUPPLIED WRENCH
TO TIGHTEN THE HEX NUT.
BATTERY
COMPARTMENT
BATTERY THIS
SIDE UP!
STICKER
Download TRONICALTUNE Manual for
detailed instructions and important safty warnings.
www.tronical.com/downloads
Tronical-Components GmbH • Heselstücken 18
22453 Hamburg Germany
© Copyright 2013 Tronical Components GmbH.
All rights reserved.
TURN ON/OFF

ASSEMBLY INSTRUCTIONASSEMBLY INSTRUCTION
SCOPE OF DELIVERY PREPARATION INSTALLATION
READY TO STRING UP DOWNLOAD MANUAL
6 xROBO-HEADS
1 xCONTACTING PCB
1 xLiPo BATTERY
1 xCHARGER INCL. WALL-PLUG
7 xLOCK NUTS & RING WASHERS
1 xWRENCH
1 xQUICK START GUIDE
AT FIRST REMOVE ALL ORIGINAL HEADSTOCK
PARTS OF YOUR GUITAR.
PLACE THE CONTACTING PCB ON THE NECK
OF THE GUITAR, THE BATTERY COMPARTMENT
HAS TO FACE TOWARDS THE TOP OF THE HEAD
STOCK.
MAKE SURE THAT ALL PCB DRILL HOLES ARE
IN ALIGNMENT WITH THE NECKS TUNER HOLES.
PUT THE ROBOHEADPINS THROUGH THE
RESPECTIVE HOLES.
BATTERY COMPARTMENT
ROBOHEAD PIN
MOUNT THE RING WASHERS & HEXNUTS.
TIGHTEN THE HEX NUTS ALL THE WAY DOWN
BY HAND.
NOW MOVE THE UNIT SLIGHTLY BACK & FORTH
TO FIND THE SWEET SPOT, THEN FIX THE LOCK
NUTS CROSSWISE WITH THE SUPPLIED WRENCH
APPROX. 1.51.8 Nm.
CAUTION: THE STICKER HAS TO FACE UPWARDS.
THE LOCKING SHAPE HAS TO BE INSERTED INTO
THE ELECTRONIC BOX UNTIL IT ENGAGES
CLICK. DO NOT APPLY ANY FORCE TO INSERT!
NOW TRONICALTUNE IS READY TO STRING UP
YOUR GUITAR. PLEASE DOWNLOAD THE MANUAL
AND FOLLOW THE INSTRUCTIONS.
WRENCH
HEX NUT LOCK NUT
NOTE: DO NOT USE ANY TOOLS TO
FIX THE LOCK NUT USE A 1 CENT COIN
TO TIGHTEN IT, OTHERWISE YOU MAY
DAMAGE THE GEAR WHEELS!
USE ONLY SUPPLIED WRENCH
TO TIGHTEN THE HEX NUT.
BATTERY
COMPARTMENT
BATTERY THIS
SIDE UP!
STICKER
Download TRONICALTUNE Manual for
detailed instructions and important safty warnings.
www.tronical.com/downloads
Tronical-Components GmbH • Heselstücken 18
22453 Hamburg Germany
© Copyright 2013 Tronical Components GmbH.
All rights reserved.
TURN ON/OFF

ASSEMBLY INSTRUCTIONASSEMBLY INSTRUCTION
SCOPE OF DELIVERY PREPARATION INSTALLATION
READY TO STRING UP DOWNLOAD MANUAL
6 xROBO-HEADS
1 xCONTACTING PCB
1 xLiPo BATTERY
1 xCHARGER INCL. WALL-PLUG
7 xLOCK NUTS & RING WASHERS
1 xWRENCH
1 xQUICK START GUIDE
AT FIRST REMOVE ALL ORIGINAL HEADSTOCK
PARTS OF YOUR GUITAR.
PLACE THE CONTACTING PCB ON THE NECK
OF THE GUITAR, THE BATTERY COMPARTMENT
HAS TO FACE TOWARDS THE TOP OF THE HEAD
STOCK.
MAKE SURE THAT ALL PCB DRILL HOLES ARE
IN ALIGNMENT WITH THE NECKS TUNER HOLES.
PUT THE ROBOHEADPINS THROUGH THE
RESPECTIVE HOLES.
BATTERY COMPARTMENT
ROBOHEAD PIN
MOUNT THE RING WASHERS & HEXNUTS.
TIGHTEN THE HEX NUTS ALL THE WAY DOWN
BY HAND.
NOW MOVE THE UNIT SLIGHTLY BACK & FORTH
TO FIND THE SWEET SPOT, THEN FIX THE LOCK
NUTS CROSSWISE WITH THE SUPPLIED WRENCH
APPROX. 1.51.8 Nm.
CAUTION: THE STICKER HAS TO FACE UPWARDS.
THE LOCKING SHAPE HAS TO BE INSERTED INTO
THE ELECTRONIC BOX UNTIL IT ENGAGES
CLICK. DO NOT APPLY ANY FORCE TO INSERT!
NOW TRONICALTUNE IS READY TO STRING UP
YOUR GUITAR. PLEASE DOWNLOAD THE MANUAL
AND FOLLOW THE INSTRUCTIONS.
WRENCH
HEX NUT LOCK NUT
NOTE: DO NOT USE ANY TOOLS TO
FIX THE LOCK NUT USE A 1 CENT COIN
TO TIGHTEN IT, OTHERWISE YOU MAY
DAMAGE THE GEAR WHEELS!
USE ONLY SUPPLIED WRENCH
TO TIGHTEN THE HEX NUT.
BATTERY
COMPARTMENT
BATTERY THIS
SIDE UP!
STICKER
Download TRONICALTUNE Manual for
detailed instructions and important safty warnings.
www.tronical.com/downloads
Tronical-Components GmbH • Heselstücken 18
22453 Hamburg Germany
© Copyright 2013 Tronical Components GmbH.
All rights reserved.
TURN ON/OFF

ASSEMBLY INSTRUCTIONASSEMBLY INSTRUCTION
SCOPE OF DELIVERY PREPARATION INSTALLATION
READY TO STRING UP DOWNLOAD MANUAL
6 xROBO-HEADS
1 xCONTACTING PCB
1 xLiPo BATTERY
1 xCHARGER INCL. WALL-PLUG
7 xLOCK NUTS & RING WASHERS
1 xWRENCH
1 xQUICK START GUIDE
AT FIRST REMOVE ALL ORIGINAL HEADSTOCK
PARTS OF YOUR GUITAR.
PLACE THE CONTACTING PCB ON THE NECK
OF THE GUITAR, THE BATTERY COMPARTMENT
HAS TO FACE TOWARDS THE TOP OF THE HEAD
STOCK.
MAKE SURE THAT ALL PCB DRILL HOLES ARE
IN ALIGNMENT WITH THE NECKS TUNER HOLES.
PUT THE ROBOHEADPINS THROUGH THE
RESPECTIVE HOLES.
BATTERY COMPARTMENT
ROBOHEAD PIN
MOUNT THE RING WASHERS & HEXNUTS.
TIGHTEN THE HEX NUTS ALL THE WAY DOWN
BY HAND.
NOW MOVE THE UNIT SLIGHTLY BACK & FORTH
TO FIND THE SWEET SPOT, THEN FIX THE LOCK
NUTS CROSSWISE WITH THE SUPPLIED WRENCH
APPROX. 1.51.8 Nm.
CAUTION: THE STICKER HAS TO FACE UPWARDS.
THE LOCKING SHAPE HAS TO BE INSERTED INTO
THE ELECTRONIC BOX UNTIL IT ENGAGES
CLICK. DO NOT APPLY ANY FORCE TO INSERT!
NOW TRONICALTUNE IS READY TO STRING UP
YOUR GUITAR. PLEASE DOWNLOAD THE MANUAL
AND FOLLOW THE INSTRUCTIONS.
WRENCH
HEX NUT LOCK NUT
NOTE: DO NOT USE ANY TOOLS TO
FIX THE LOCK NUT USE A 1 CENT COIN
TO TIGHTEN IT, OTHERWISE YOU MAY
DAMAGE THE GEAR WHEELS!
USE ONLY SUPPLIED WRENCH
TO TIGHTEN THE HEX NUT.
BATTERY
COMPARTMENT
BATTERY THIS
SIDE UP!
STICKER
Download TRONICALTUNE Manual for
detailed instructions and important safty warnings.
www.tronical.com/downloads
Tronical-Components GmbH • Heselstücken 18
22453 Hamburg Germany
© Copyright 2013 Tronical Components GmbH.
All rights reserved.
TURN ON/OFF

ASSEMBLY INSTRUCTIONASSEMBLY INSTRUCTION
SCOPE OF DELIVERY PREPARATION INSTALLATION
READY TO STRING UP DOWNLOAD MANUAL
6 xROBO-HEADS
1 xCONTACTING PCB
1 xLiPo BATTERY
1 xCHARGER INCL. WALL-PLUG
7 xLOCK NUTS & RING WASHERS
1 xWRENCH
1 xQUICK START GUIDE
AT FIRST REMOVE ALL ORIGINAL HEADSTOCK
PARTS OF YOUR GUITAR.
PLACE THE CONTACTING PCB ON THE NECK
OF THE GUITAR, THE BATTERY COMPARTMENT
HAS TO FACE TOWARDS THE TOP OF THE HEAD
STOCK.
MAKE SURE THAT ALL PCB DRILL HOLES ARE
IN ALIGNMENT WITH THE NECKS TUNER HOLES.
PUT THE ROBOHEADPINS THROUGH THE
RESPECTIVE HOLES.
BATTERY COMPARTMENT
ROBOHEAD PIN
MOUNT THE RING WASHERS & HEXNUTS.
TIGHTEN THE HEX NUTS ALL THE WAY DOWN
BY HAND.
NOW MOVE THE UNIT SLIGHTLY BACK & FORTH
TO FIND THE SWEET SPOT, THEN FIX THE LOCK
NUTS CROSSWISE WITH THE SUPPLIED WRENCH
APPROX. 1.51.8 Nm.
CAUTION: THE STICKER HAS TO FACE UPWARDS.
THE LOCKING SHAPE HAS TO BE INSERTED INTO
THE ELECTRONIC BOX UNTIL IT ENGAGES
CLICK. DO NOT APPLY ANY FORCE TO INSERT!
NOW TRONICALTUNE IS READY TO STRING UP
YOUR GUITAR. PLEASE DOWNLOAD THE MANUAL
AND FOLLOW THE INSTRUCTIONS.
WRENCH
HEX NUT LOCK NUT
NOTE: DO NOT USE ANY TOOLS TO
FIX THE LOCK NUT USE A 1 CENT COIN
TO TIGHTEN IT, OTHERWISE YOU MAY
DAMAGE THE GEAR WHEELS!
USE ONLY SUPPLIED WRENCH
TO TIGHTEN THE HEX NUT.
BATTERY
COMPARTMENT
BATTERY THIS
SIDE UP!
STICKER
Download TRONICALTUNE Manual for
detailed instructions and important safty warnings.
www.tronical.com/downloads
Tronical-Components GmbH • Heselstücken 18
22453 Hamburg Germany
© Copyright 2013 Tronical Components GmbH.
All rights reserved.
TURN ON/OFF

ASSEMBLY INSTRUCTIONASSEMBLY INSTRUCTION
SCOPE OF DELIVERY PREPARATION INSTALLATION
READY TO STRING UP DOWNLOAD MANUAL
6 xROBO-HEADS
1 xCONTACTING PCB
1 xLiPo BATTERY
1 xCHARGER INCL. WALL-PLUG
7 xLOCK NUTS & RING WASHERS
1 xWRENCH
1 xQUICK START GUIDE
AT FIRST REMOVE ALL ORIGINAL HEADSTOCK
PARTS OF YOUR GUITAR.
PLACE THE CONTACTING PCB ON THE NECK
OF THE GUITAR, THE BATTERY COMPARTMENT
HAS TO FACE TOWARDS THE TOP OF THE HEAD
STOCK.
MAKE SURE THAT ALL PCB DRILL HOLES ARE
IN ALIGNMENT WITH THE NECKS TUNER HOLES.
PUT THE ROBOHEADPINS THROUGH THE
RESPECTIVE HOLES.
BATTERY COMPARTMENT
ROBOHEAD PIN
MOUNT THE RING WASHERS & HEXNUTS.
TIGHTEN THE HEX NUTS ALL THE WAY DOWN
BY HAND.
NOW MOVE THE UNIT SLIGHTLY BACK & FORTH
TO FIND THE SWEET SPOT, THEN FIX THE LOCK
NUTS CROSSWISE WITH THE SUPPLIED WRENCH
APPROX. 1.51.8 Nm.
CAUTION: THE STICKER HAS TO FACE UPWARDS.
THE LOCKING SHAPE HAS TO BE INSERTED INTO
THE ELECTRONIC BOX UNTIL IT ENGAGES
CLICK. DO NOT APPLY ANY FORCE TO INSERT!
NOW TRONICALTUNE IS READY TO STRING UP
YOUR GUITAR. PLEASE DOWNLOAD THE MANUAL
AND FOLLOW THE INSTRUCTIONS.
WRENCH
HEX NUT LOCK NUT
NOTE: DO NOT USE ANY TOOLS TO
FIX THE LOCK NUT USE A 1 CENT COIN
TO TIGHTEN IT, OTHERWISE YOU MAY
DAMAGE THE GEAR WHEELS!
USE ONLY SUPPLIED WRENCH
TO TIGHTEN THE HEX NUT.
BATTERY
COMPARTMENT
BATTERY THIS
SIDE UP!
STICKER
Download TRONICALTUNE Manual for
detailed instructions and important safty warnings.
www.tronical.com/downloads
Tronical-Components GmbH • Heselstücken 18
22453 Hamburg Germany
© Copyright 2013 Tronical Components GmbH.
All rights reserved.
TURN ON/OFF

ASSEMBLY INSTRUCTIONASSEMBLY INSTRUCTION
SCOPE OF DELIVERY PREPARATION INSTALLATION
READY TO STRING UP DOWNLOAD MANUAL
6 xROBO-HEADS
1 xCONTACTING PCB
1 xLiPo BATTERY
1 xCHARGER INCL. WALL-PLUG
7 xLOCK NUTS & RING WASHERS
1 xWRENCH
1 xQUICK START GUIDE
AT FIRST REMOVE ALL ORIGINAL HEADSTOCK
PARTS OF YOUR GUITAR.
PLACE THE CONTACTING PCB ON THE NECK
OF THE GUITAR, THE BATTERY COMPARTMENT
HAS TO FACE TOWARDS THE TOP OF THE HEAD
STOCK.
MAKE SURE THAT ALL PCB DRILL HOLES ARE
IN ALIGNMENT WITH THE NECKS TUNER HOLES.
PUT THE ROBOHEADPINS THROUGH THE
RESPECTIVE HOLES.
BATTERY COMPARTMENT
ROBOHEAD PIN
MOUNT THE RING WASHERS & HEXNUTS.
TIGHTEN THE HEX NUTS ALL THE WAY DOWN
BY HAND.
NOW MOVE THE UNIT SLIGHTLY BACK & FORTH
TO FIND THE SWEET SPOT, THEN FIX THE LOCK
NUTS CROSSWISE WITH THE SUPPLIED WRENCH
APPROX. 1.51.8 Nm.
CAUTION: THE STICKER HAS TO FACE UPWARDS.
THE LOCKING SHAPE HAS TO BE INSERTED INTO
THE ELECTRONIC BOX UNTIL IT ENGAGES
CLICK. DO NOT APPLY ANY FORCE TO INSERT!
NOW TRONICALTUNE IS READY TO STRING UP
YOUR GUITAR. PLEASE DOWNLOAD THE MANUAL
AND FOLLOW THE INSTRUCTIONS.
WRENCH
HEX NUT LOCK NUT
NOTE: DO NOT USE ANY TOOLS TO
FIX THE LOCK NUT USE A 1 CENT COIN
TO TIGHTEN IT, OTHERWISE YOU MAY
DAMAGE THE GEAR WHEELS!
USE ONLY SUPPLIED WRENCH
TO TIGHTEN THE HEX NUT.
BATTERY
COMPARTMENT
BATTERY THIS
SIDE UP!
STICKER
Download TRONICALTUNE Manual for
detailed instructions and important safty warnings.
www.tronical.com/downloads
Tronical-Components GmbH • Heselstücken 18
22453 Hamburg Germany
© Copyright 2013 Tronical Components GmbH.
All rights reserved.
TURN ON/OFF

ASSEMBLY INSTRUCTIONASSEMBLY INSTRUCTION
SCOPE OF DELIVERY PREPARATION INSTALLATION
READY TO STRING UP DOWNLOAD MANUAL
6 xROBO-HEADS
1 xCONTACTING PCB
1 xLiPo BATTERY
1 xCHARGER INCL. WALL-PLUG
7 xLOCK NUTS & RING WASHERS
1 xWRENCH
1 xQUICK START GUIDE
AT FIRST REMOVE ALL ORIGINAL HEADSTOCK
PARTS OF YOUR GUITAR.
PLACE THE CONTACTING PCB ON THE NECK
OF THE GUITAR, THE BATTERY COMPARTMENT
HAS TO FACE TOWARDS THE TOP OF THE HEAD
STOCK.
MAKE SURE THAT ALL PCB DRILL HOLES ARE
IN ALIGNMENT WITH THE NECKS TUNER HOLES.
PUT THE ROBOHEADPINS THROUGH THE
RESPECTIVE HOLES.
BATTERY COMPARTMENT
ROBOHEAD PIN
MOUNT THE RING WASHERS & HEXNUTS.
TIGHTEN THE HEX NUTS ALL THE WAY DOWN
BY HAND.
NOW MOVE THE UNIT SLIGHTLY BACK & FORTH
TO FIND THE SWEET SPOT, THEN FIX THE LOCK
NUTS CROSSWISE WITH THE SUPPLIED WRENCH
APPROX. 1.51.8 Nm.
CAUTION: THE STICKER HAS TO FACE UPWARDS.
THE LOCKING SHAPE HAS TO BE INSERTED INTO
THE ELECTRONIC BOX UNTIL IT ENGAGES
CLICK. DO NOT APPLY ANY FORCE TO INSERT!
NOW TRONICALTUNE IS READY TO STRING UP
YOUR GUITAR. PLEASE DOWNLOAD THE MANUAL
AND FOLLOW THE INSTRUCTIONS.
WRENCH
HEX NUT LOCK NUT
NOTE: DO NOT USE ANY TOOLS TO
FIX THE LOCK NUT USE A 1 CENT COIN
TO TIGHTEN IT, OTHERWISE YOU MAY
DAMAGE THE GEAR WHEELS!
USE ONLY SUPPLIED WRENCH
TO TIGHTEN THE HEX NUT.
BATTERY
COMPARTMENT
BATTERY THIS
SIDE UP!
STICKER
Download TRONICALTUNE Manual for
detailed instructions and important safty warnings.
www.tronical.com/downloads
Tronical-Components GmbH • Heselstücken 18
22453 Hamburg Germany
© Copyright 2013 Tronical Components GmbH.
All rights reserved.
TURN ON/OFF