Denon AV8802 Technical manual

1
Please note that we are very happy to announce that the free of charge DTS:X update for the AV8802
and AV8802A is available for download.
This update introduces some changes to your system that we want you to be aware before you update the
unit since it may affect daily usage.
The following features are added:
•DTS:X decoding
•DTS Neural:X upmixing to enjoy non DTS:X content (in PCM or DTS format) using the full DTS:X speaker
configuration
With added DTS:X decoding and DTS Neual:X upmixing capability, following changes will happen to your
receivers:
•DTS Neo:X will be replaced by DTS Neural:X
•Dolby Surround mode usage will be limited to PCM and Dolby content
You can also take a look in the modified user manuals for the products:
Web manual for AV8802 with DTS:X
Web manual for AV8802A with DTS:X
AV8802(A) DTS:X UPDATE

2
To update your unit, follow the below steps:
1. Press the SETUP button on the Remote Control
2. Select General > Firmware > Update
3. Select Update Now
*Note on Auro-3D upgraded units:
If you have an Auro-3D upgraded unit, DTS:X firmware update won’t effect this. However we will add more
flexibility to the speaker setup and after the update you will be able to use the following speaker
configuration to enjoy all 3D sound formats (Dolby Atmos, DTS:X and Auro-3D) by one speaker layout with
4 height speakers:
Front (FL/FR)
Center (C)
Surround (SL/SR)
Front Height (FHL/FHR)
Rear Height (RHL/RHR)
Subwoofer (SW)
AV8802(A) DTS:X UPDATE

DTS:X FIRMWARE UPDATE FOR THIS UNIT
This unit needs a rmware update to enjoy DTS:X.
How to update
1. When the DTS:X rmware update is available, the following screen will appear on
yourTVafteryouturnontheunitandestablishaninternetconnection.
q w e
2. Selectoneofthefollowingoptionsfromonscreendisplay.
qUpdate Now
Start the update process.
w Update Later
The following screen will appear.
w-1
w-2
w-1. Remind Me Later
Will ask if you want to update the next time
you turn the unit on.
w-2. Update during Standby
The unit’s rmware will update the next time
you turn it o.
e Ignore
Do not update the rmware of your unit.
%
You can also update rmware of the unit from the setup menu.
1. Press the SETUP button on the Remote Control.
2. Select General → Firmware → Update
3. Select Update.
3520 10413 00AM
Copyright © 2015 D&M Holdings Inc. All Rights Reserved.
EN