Troy-Bilt 12AE449 Series Guide

Read and understand all instruction, warning, and danger labels.
IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY AND
FOLLOW THE SAFE OPERATION PRACTICES BEFORE OPERATING .
Need Help? Call 1-888-TO-HELP-U (1-888-864-3578)
Lea el manual de operación anexo sobre ensamblaje e inicio.
Use cable ties to secure cable(s) to lower handle.
1
2
3
4
Refer to Operator’s Manual for instructions on attaching the grass catcher.
778-11360© 2006 12AE449
Blade Control Handle
Lift handle to extended position.
Tighten star knobs. Recoil
Starter
Star Knobs
A
B
Wing Nuts (2)
Hardware Pack
Carriage Bolts (2)
Place ends of lower handle onto handle brackets.
Insert carriage bolts and tighten with wing nuts.
A
B
C
D
Hold blade control handle against upper handle.
Slowly slip recoil starter into rope guide.
Tighten rope guide wing knob.

Read and understand all instruction, warning, and danger labels.
IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY AND
FOLLOW THE SAFE OPERATION PRACTICES BEFORE OPERATING .
Need Help?
Call 1-888-TO-HELP-U
Lea el manual de operación anexo sobre ensamblaje e inicio.
Fill tank with gas to within 1/2 inch of top of tank.
Fill engine with entire contents of oil bottle supplied
with your mower.
5
6
Push primer ve times. 7
Gas Cap
Oil Fill
Primer
Depress blade control handle and hold.
9
8
Pull recoil starter with quick, full armstroke. If engine
does not start after ten seconds of repeated pulls,
repeat steps 7 through 9.
Electric start battery must be charged for 8-10
hours before initial use. See Maintenance Section in
Operator’s Manual.