True TR1RRT-1S-1S User manual

Specifications subject to change without notice.
Chart dimensions rounded up to the nearest 1/8" (millimeters rounded up to next whole number).
ROUGH-IN DATA
St. Charles Industrial Center • P.O. Box 970 • O’Fallon, Missouri 63366
[phone] • FAX [phone] • [phone] • www.truemfg.com
Parts Dept. (800)424-TRUE • Parts Dept. FAX# [phone]
Model:
TRUE FOOD SERVICE
EQUIPMENT, INC.
Project Name:
Location:
Item #: Qty:
Model #:
AIA #
SIS #
Printed in U.S.A.
APPROVALS:
T RUE R EFRIGERATION
MADE IN
SINCE 1945
U.S.A.
TM
AVAILABLE AT:
TR1RRT-1S-1S
TR1RRT-1S-1S
Model Doors
Capacity
(Cu. Ft.)
(liters)
Cabinet Dimensions
(inches)
(mm)
LD
†H*HP Voltage Amps
NEMA
Config.
Cord
Length
(total ft.)
(total m)
Crated
Weight
(lbs.)
(kg)
TR1RRT-1S-1S 2 37
1048
35
889
367/8
937
833/4
2128
1/3115/60/1 8.9 5-15P 9
2.74
475
216
†Depth does not include 41/4" (108 mm) for each side for ramps.
*Height does not include 1" (26 mm) for system mechanical components.
12/05
Designed using the highest
quality materials and
components to provide the
user with colder product
temperatures, lower utility costs
and exceptional food safety.
Oversized, factory balanced,
refrigeration system holds 33°F
to 38°F (.5°C to 3.3°C) for the
best in food preservation.
300 series stainless steel exterior
and interior. The very finest
stainless with higher tensile
strength for fewer dents and
scratches.
Designed to accept roll-in
racks (inboard castors) with a
maximum dimension of 27"L
x 29"D x 66"H (686 mm x 737
mm x 1677 mm). One (1) heavy
gauge stainless steel ramp
standard per door.
Three (3) lifetime guaranteed,
cam-lift hinges per door. Full
180° open capability with a stay
open feature at 120°.
Entire cabinet structure and
solid doors are foamed-in-place
using high density, CFC free,
polyurethane insulation.
Lifetime guaranteed recessed
door handles.
TR Series:
Roll-Thru Solid Door Refrigerator
R
®

STANDARD FEATURES
Model:
TRUE FOOD SERVICE EQUIPMENT
St. Charles Industrial Center • P.O. Box 970 • O’Fallon, Missouri 63366 • [phone] • FAX [phone] • [phone] • www.truemfg.com
WARRANTY
One year warranty on all parts
and labor and an additional 4
year warranty on compressor.
(U.S.A. only)
METRIC DIMENSIONS ROUNDED UP TO THE
NEAREST WHOLE MILLIMETER
SPECIFICATIONS SUBJECT TO CHANGE
WITHOUT NOTICE
Model Elevation Right Plan 3D
PLAN VIEW
KCL
TR1RRT-1S-1S TFQY51E TFQX161S TFQX61P TFQX613
TR1RRT-1S-1S
DESIGN
• True’s solid door roll-thru’s are
designed with enduring quality that
protects your long term investment.
• Designed using the highest quality
materials and components to
provide the user with colder product
temperatures, lower utility costs and
exceptional food safety.
REFRIGERATION SYSTEM
• Factory engineered, self-contained,
capillary tube system using
environmentally friendly (CFC free)
134A refrigerant.
• Extra large evaporator coil balanced
with higher horsepower compressor
and large condenser maintains
cabinet temperatures of 33°F to 38°F
(.5°C to 3.3°C) for the best in food
preservation.
• Sealed, cast iron, self-lubricating
evaporator fan motors and larger fan
blades give True reach-in’s a more
efficient low velocity, high volume
airflow design. This unique design
insures faster temperature recovery
and shorter run times in the busiest of
foodservice environments.
• Top mounted refrigeration system
with evaporator positioned out of
food zone to maximize capacity.
• Hot gas condensate for energy
efficiency. Glass condensate pan to
prevent electrolysis.
CABINET CONSTRUCTION
• Exterior - 300 series stainless steel
doors, front, sides, rear and bottom.
• Interior - 300 series stainless steel liner
and floor.
• Insulation - entire cabinet structure
and solid doors are foamed-in-
place using high density, CFC free,
polyurethane insulation.
• Two (2) heavy gauge stainless steel
ramps (one per door).
• Designed to accept roll-in rack
(inboard castors) with a maximum
dimension of 27"L x 29"D x 66"H
(686 mm x 737 mm x 1677 mm).
DOOR
• 300 series stainless steel exterior and
door liner. Doors opens within cabinet
dimension.
• Door locks standard.
• Lifetime guaranteed recessed door
handles. Each door fitted with 12"
(305 mm) long recessed handle that
is foamed-in-place with a sheet
metal interlock to insure permanent
attachment.
• Three (3) lifetime guaranteed, cam-
lift hinges per door. Full 180° open
capability with a stay open feature at
120°.
• Magnetic door gaskets of one piece
construction, removable without tools
for ease of cleaning.
• Doors are field reversible.
LIGHTING
• Incandescent interior lighting - lights
activated by rocker switch mounted
above doors, safety shielded.
MODEL FEATURES
• Exterior mounted temperature
monitor. Available with either °F or °C
display.
• Evaporator epoxy coated to eliminate
the potential of corrosion.
• NSF-7 compliant for open food
product.
ELECTRICAL
• Unit completely pre-wired at factory
and ready for final connection to a
115/60/1 phase - 15 amp dedicated
outlet. Cord and plug set included.
OPTIONAL FEATURES/ACCESSORIES
Upcharge and lead times may apply.
❒230 - 240V / 50 Hz.
❒ Metal door handles (factory installed).
❒ Electronic temperature control (factory
installed).
❒ Correctional facilities options.
❒ Remote cabinets (condensing unit supplied
by others; system comes standard with
404A expansion valve and requires R404A
refrigerant), consult factory technical
service department for BTU information.
115/60/1
NEMA-5-15R
TR Series:
Deep Reach-In
Roll-Thru Solid Door Refrigerator
ELEVATION PLAN VIEW
833/4"
(2128 mm)
843/4"
(2153 mm)
367/8"
(937 mm)
30"
(762 mm)
967/8"
(2461 mm)
35"
(889 mm)
30"
(762 mm)
1"
(26 mm)
RIGHT VIEW
453/8"
(1153 mm)
41/4"
(108 mm)
41/4"
(108 mm)