trungloi ICS7200 User manual

Box Type CMOS
H.264/MPEG4
Mega Pixel IP Camera
Quick Installation Guide
Version 1.0

-1-
1 Getting Started
Package Contents
Check the items contained in the package carefully. You should
have the following items. Once any item contained is damaged or
missing, contact the authorized dealer of your locale.
One ICS7200/ICS7230/ICS7220
One External Antenna (for wireless model).
One AC Power Adapter.
One Wall Mount Kit.
One GPIO Connector.
One Ethernet Cable (RJ-45 type).
One Installation CD-ROM.
One Quick Installation Guide.
System Requirement
Networking
LAN: 10Base-T Ethernet or 100Base-TX Fast
Ethernet, Auto-MDIX.
WLAN: IEEE 802.11b/g/n (for wireless model).
Accessing the Camera using Web Browser
Platform: Microsoft® Windows® 2000/XP/Vista/Win7
CPU: Intel Pentium III 800MHz or above
RAM: 512MB
Resolution: 800x600 or above
User Interface: Microsoft® Internet Explorer 6.0 or above;
Mozilla Firefox 2.00 or above;Apple Safari 2
or above; Google Chrome

-2-
2 Setting Up the Camera
Installing the Wall Mount Kit
The Wall Mount Kit that is provided in the package has a swivel
ball screw head, so that can you can attach it to the screw hole on
the camera’s top (or bottom) panel.
After attaching the camera to the Wall Mount Kit, the camera can
be mounted on the wall or ceiling securely through the three
screw holes on the base of the Wall Mount Kit.
Wall Mount Kit

-3-
Connecting Power and LAN
1. Connecting the camera to power source
Use the provided AC power adapter to connect the camera to
the power supply, such as the electrical outlet on the wall,
and the camera will be powered on automatically. You can
verify the power status from the Power LED on the rear panel
of the camera.
2. Connecting the camera to LAN
Use the provided Ethernet cable to connect the camera to
your local area network (LAN). Once connected, the Link LED
starts flashing green light and the camera is on standby and
ready for use now.
Connecting the Ethernet Cable and Power Cable


-4-
Connecting WLAN (for wireless model)
If you use a wireless network in your application environment, you
need to attach the included external antenna to the camera.
When the camera is powered on, the camera will automatically
search any access point with “default” SSID.
Connecting the External Antenna
NOTE If the camera cannot to your wireless network, you need to
install the camera in LAN and proceed with WLAN settings.

-5-
3 Accessing the Camera
Using IP Finder
1. Insert the Installation CD-ROM into your computer’s CD-ROM
drive to initiate the Auto-Run program.
2. Click the IP Finder item to launch the utility. The control
panel will appear as below.
3. Once you get the IP address of the camera, launch the Web
browser or Ultra View Pro to access your camera.
TIP The Installation CD-ROM provides a setup program that
allows you to install IPFinder on your computer. To install
IPFinder, click Install Software on the Auto-Run screen.
Both IPFinder shortcut and UltraView Pro shortcut will be
installed on the computer desktop.
Display the connected
camera(s). Double click
to link the Camera.
Click About to get the Version information of IPFinder.
Click Link to connect the selected camera.
Click Change IP to modify the IP address of the selected camera.
Click Search to find the IP address of the connected camera(s).
Click Exit to close the utility.

-6-
Accessing to the Camera
1. Since the default configuration of the camera is DHCP mode
enabled, you are recommended to launch IPFinder to search
the IP address that is assigned to the camera by the DHCP
server, and then click Link to access the camera via the Web
browser.
2. If Network Camera can't get IP Address under DHCP mode,
the default IP Address will be 192.168.0.30.
3. When the login window appears, enter the default User name
(admin as default) and Password (admin as default) and
click OK to access to the main screen of the camera’s Web
Configuration.
Enter the User name
and Password.

-7-
4. Select Language from the pull-down menu. (Language
supported: English, Traditional Chinese, Simplified Chinese,
German, French, Spanish, and Italian, and Japanese)
5. Click Setup and then Smart Wizard to set up your camera
quickly. The Smart Wizard will guide you through the
necessary settings with detailed instructions on each step.

-8-
4 Tips
For more information, please refer to the Advanced Installation
Guide on the provided Installation CD-ROM.
For details of operating UltraView Pro, please refer to the
Software User Guide on the provided Installation CD-ROM.
If you have any problem on the product(s), please contact your
local authorized dealer.