20245 - VIGOR 2.1 SUBWOOFER SPEAKER SET - BROWN
Frequently Asked Questions
Installation and configuration
How do I install this speaker set to my computer?
To install the speaker set:
1. Connect the satellites to the subwoofer.
2. Connect the subwoofer to a wall power outlet.
3. Connect the remote control to the subwoofer and to the computer.
4. Switch the subwoofer on.
5. Turn the volume on the remote higher.
6. Turn the volume and bass on the subwoofer higher.
7. Make sure that the speaker is set as the default audio device in the Sound
Settings/Preferences of the computer.
Usage
My speaker (with smart power management) won't resume playing?
Your speaker will go into Standby mode if it doesn’t detect audio input after a specific
amount of time.
This speaker uses a fixed threshold input level to enable the smart power management
feature. This means if you greatly lower the volume your speaker might interpret this as
silence and go into Standby mode.
To avoid this from happening, turn up the volume as high as it can go without distortion
setting in, and use the volume controls on your speaker to determine how loud (or soft) you
want your audio.
My speaker (with smart power management) stops working after some time, what is
happening?
After a period of no sound, your speaker has entered a power saving mode in order to
preserve energy. When you play music again, the speaker will automatically resume playing
as usual.
