TSL Horti Tech Grower's Choice BLOOM BOOST User manual

BLOOM BOOST
UV-R BAR
LED user manual
Installation and Operating Instructions

introductions:
PLEASE READ
THESE INSTRUCTIONS
BEFORE USING
THE PRODUCT
Introducing the Grower’s Choice Bloom Boost UV-Bar. A horticulturally
engineered supplemental bar set, which provides a key spectrum to
further promote overall health, robust plant growth and increase resin
production working much like a 10k finishing bulbs. Our new Bloom
Boost UV-R Bar set is specifically designed to pair with the ROI-E720,
as a “Plug and Play” system requiring no additional wiring. The bar
set is controllable and dimmable when paired with a GC Master
Controller. Our Bloom Boost UV-R Bar is a horticulturally engineered
full spectrum UV fixture including 6 different wavelengths providing a
true full spectrum UV Solution for the best growing results.
01
02
introductions:
PLEASE READ
THESE INSTRUCTIONS
BEFORE USING
THE PRODUCT
Introducing the Grower’s Choice Bloom Boost UV-Bar. A horticulturally
engineered supplemental bar set, which provides a key spectrum to
further promote overall health, robust plant growth and increase resin
production working much like a 10k finishing bulbs. Our new Bloom
Boost UV-R Bar set is specifically designed to pair with the ROI-E720,
as a “Plug and Play” system requiring no additional wiring. The bar
set is controllable and dimmable when paired with a GC Master
Controller. Our Bloom Boost UV-R Bar is a horticulturally engineered
full spectrum UV fixture including 6 different wavelengths providing a
true full spectrum UV Solution for the best growing results.
01
02

Safety
Warnings:
The Bloom Boost is a passively
cooled system with no moving
components. Do not try to open
or disassemble the fixture, it
contains no serviceable parts
inside. Doing so may cause harm
to the fixture and void warranty.
03
04
• Always adhere to the local rules and
regulations when installing or using the fixture.
• Wearing protective gloves and glasses is
recommended during installation.
• Always disconnect from power source before
performing any maintenance to the fixture.
• The fixture will get hot during operation. Do
not touch while the light is on. Keep this
product away from children.
• Always allow at least 10 minutes for the
fixture to cool down before handling.
• Do not touch the LED diodes.
• Keep the power cord away from hot
surfaces.
• Do not plug this system into a supply
voltage other than what is instructed on
the fixture.
• Do not use the fixture when the power
cord is damaged.
• Do not use the fixtures if the unit has
been dropped, and there is damage to the
enclosure or bars.
WARNING
Risk of electrical shock.
To reduce the possibility
of serious injury, always
take the proper precautions
and unplug the fixture
before moving or cleaning.
CAUTION
To reduce the risk of
overheating or fire, never
place operating fixtures
face down on a flush
surface. Always allow for
adequate ventilation of
fixtures and power supplies.
CAUTION – RISK OF PERSONAL INJURY
Disconnect power before servicing or installing fixture. Lighted fixture
may be hot. To reduce risk of injury, turn off or disconnect power and
allow to cool before handling. Fixture must be grounded in accordance
with appropriate codes. Failure to do so may result in serious injury or
death. Be sure all power is off prior to installing fixture.
CAUTION
LED and heat sink surfaces
may be hot. Allow sufficient
cooling time before handling.
CAUTION
To prevent eye damage,
avoid looking directly at the
unshielded LEDs.
WARNING
Light bars and power supply are
splash-proof but not waterproof. In the
event that the light bar becomes
submersed, first disengage the circuit
breaker, then unplug the fixture before
proceeding to remove from water.
Safety
Warnings:
The Bloom Boost is a passively
cooled system with no moving
components. Do not try to open
or disassemble the fixture, it
contains no serviceable parts
inside. Doing so may cause harm
to the fixture and void warranty.
03
04
• Always adhere to the local rules and
regulations when installing or using the fixture.
• Wearing protective gloves and glasses is
recommended during installation.
• Always disconnect from power source before
performing any maintenance to the fixture.
• The fixture will get hot during operation. Do
not touch while the light is on. Keep this
product away from children.
• Always allow at least 10 minutes for the
fixture to cool down before handling.
• Do not touch the LED diodes.
• Keep the power cord away from hot
surfaces.
• Do not plug this system into a supply
voltage other than what is instructed on
the fixture.
• Do not use the fixture when the power
cord is damaged.
• Do not use the fixtures if the unit has
been dropped, and there is damage to the
enclosure or bars.
WARNING
Risk of electrical shock.
To reduce the possibility
of serious injury, always
take the proper precautions
and unplug the fixture
before moving or cleaning.
CAUTION
To reduce the risk of
overheating or fire, never
place operating fixtures
face down on a flush
surface. Always allow for
adequate ventilation of
fixtures and power supplies.
CAUTION – RISK OF PERSONAL INJURY
Disconnect power before servicing or installing fixture. Lighted fixture
may be hot. To reduce risk of injury, turn off or disconnect power and
allow to cool before handling. Fixture must be grounded in accordance
with appropriate codes. Failure to do so may result in serious injury or
death. Be sure all power is off prior to installing fixture.
CAUTION
LED and heat sink surfaces
may be hot. Allow sufficient
cooling time before handling.
CAUTION
To prevent eye damage,
avoid looking directly at the
unshielded LEDs.
WARNING
Light bars and power supply are
splash-proof but not waterproof. In the
event that the light bar becomes
submersed, first disengage the circuit
breaker, then unplug the fixture before
proceeding to remove from water.

05
06
Ultraviolet Radiation!
The Grower’s Choice Bloom Boost UVR Bar is a full UV Spectrum
bar, because of this the appropriate precautions must be taken.
While Ultraviolet is beneficial for plant growth and production
human skin and eyes are vulnerable to over exposure which can
have long term harmful effects. Grower’s Choice recommends that
the appropriate protective equipment and practices.
05
06
Ultraviolet Radiation!
The Grower’s Choice Bloom Boost UVR Bar is a full UV Spectrum
bar, because of this the appropriate precautions must be taken.
While Ultraviolet is beneficial for plant growth and production
human skin and eyes are vulnerable to over exposure which can
have long term harmful effects. Grower’s Choice recommends that
the appropriate protective equipment and practices.

07
08
Contents:
• Bloom Boost UV-R Bar Set
• RJ14 cord
• Mounting Clips
Not Included:
• ROI-E720
• Lighting Controller
07
08
Contents:
• Bloom Boost UV-R Bar Set
• RJ14 cord
• Mounting Clips
Not Included:
• ROI-E720
• Lighting Controller

installation:
• Remove your Bloom Boost Bar set from its packaging.
(Do not remove the diode strip protective plastic).
09
10
• Insert the mounting lip into the slit on the
ROI-E720.
• Next carefully place the opposite end in
position and push the locking mechanism into
place until you hear an audible click.
• Repeat the installation process on the
opposite end with the second bar.
• Now secure your bar in place with the included
mounting brackets
• After both bars have been installed connect
them on to each other and finally plug in the
power cord into the ROI-E720 12v plug.
• Locate the Bloom Boost Bar with the smaller mount-
ing lip. This will be installed in between the middle bars
furthest from the dimming knob.
• When installing the bars make sure you go from under the ROI-E720 upwards.
installation:
• Remove your Bloom Boost Bar set from its packaging.
(Do not remove the diode strip protective plastic).
09
10
• Insert the mounting lip into the slit on the
ROI-E720.
• Next carefully place the opposite end in
position and push the locking mechanism into
place until you hear an audible click.
• Repeat the installation process on the
opposite end with the second bar.
• Now secure your bar in place with the included
mounting brackets
• After both bars have been installed connect
them on to each other and finally plug in the
power cord into the ROI-E720 12v plug.
• Locate the Bloom Boost Bar with the smaller mount-
ing lip. This will be installed in between the middle bars
furthest from the dimming knob.
• When installing the bars make sure you go from under the ROI-E720 upwards.

Controllability:
The Bloom Boost UV Bars are fully controllable with a controller or
manually through the switches on board. Follow the instructions on
the units decal to set manual dimmer. If using a controller you will
need RJ14 data cords. Grower's Choice recommends that the Bloom
Boost is used on its own separate group while using a controller.
11
12
Controllability:
The Bloom Boost UV Bars are fully controllable with a controller or
manually through the switches on board. Follow the instructions on
the units decal to set manual dimmer. If using a controller you will
need RJ14 data cords. Grower's Choice recommends that the Bloom
Boost is used on its own separate group while using a controller.
11
12

13
14
Warranty:
TSL Horti Tech and Grower's Choice warrants the mechanical and
electronic components of their product to be free from defects in
material and workmanship if used under normal operation conditions
for a period of 1 year from the original date of purchase. If the product
shows any defects within this period and that defect is not due to
user error or improper use, TSL Horti Tech and Grower's Choice shall,
at its direction, either replace or repair the product using suitable
new or reconditioned products or parts. TSL Horti Tech and Grower's
Choice warranty liability extends only to the replacement cost of the
product. In case TSL Horti Tech and Grower's Choice decides to
replace the entire product, the limited warranty shall apply to the
replacement product for the remaining initial warranty period.
TSL Horti Tech shall not be held responsible
for any damage caused by the operation of the
unit, be it incidental or consequential or any
type including, without limitation, damage or
injury caused to other products or machinery or
buildings. Nor will responsibility be accepted for
loss of time or profit, or for any inconvenience
caused in any way whatsoever.
13
14
Warranty:
TSL Horti Tech and Grower's Choice warrants the mechanical and
electronic components of their product to be free from defects in
material and workmanship if used under normal operation conditions
for a period of 1 year from the original date of purchase. If the product
shows any defects within this period and that defect is not due to
user error or improper use, TSL Horti Tech and Grower's Choice shall,
at its direction, either replace or repair the product using suitable
new or reconditioned products or parts. TSL Horti Tech and Grower's
Choice warranty liability extends only to the replacement cost of the
product. In case TSL Horti Tech and Grower's Choice decides to
replace the entire product, the limited warranty shall apply to the
replacement product for the remaining initial warranty period.
TSL Horti Tech shall not be held responsible
for any damage caused by the operation of the
unit, be it incidental or consequential or any
type including, without limitation, damage or
injury caused to other products or machinery or
buildings. Nor will responsibility be accepted for
loss of time or profit, or for any inconvenience
caused in any way whatsoever.

Tel: [phone]
E-mail: [email protected]
Website: www.growersc.com
Address: 2510 E Merrill Ave. Ontario CA 91762