TTS Easi-View User manual

™
User Guide Version 6

Easi-View User Guide
2
Please Read All Instructions Carefully Before Using
Please retain these instructions for future reference
Do not allow your Easi-View to come into contact
with water or other liquids
In the event of an electro-static discharge, your
Easi-View may malfunction. In this case, please
switch it off and then back on again to reset it
Warranty is void if the case is opened for any reason
The warranty does not cover any data loss from the
unit nor any consequential loss of information
FCC compliance
NOTE:
THE MANUFACTURER IS NOT RESPONSIBLE FOR
ANY RADIO OR TV INTERFERENCE CAUSED BY
UNAUTHORIZED MODIFICATIONS TO THIS
EQUIPMENT. SUCH MODIFICATIONS COULD VOID

Easi-View User Guide
3
THE USER AUTHORITY TO OPERATE THE
EQUIPMENT
NOTE: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician
for help

Easi-View User Guide
4
Know Your Easi-View
3.0 MP Camera
Bendy
Gooseneck
Lamp Button
Photo Button
3.5mm jack socket for
external SEN switch
8 super-bright
LEDs
Built in Microphone

Easi-View User Guide
5
Easi-View Controls
There are two buttons on the base of the Easi-View:
Press the snapshot button to take a
new picture.
Press the Light button to turn on the
LEDs. Pressing the button repeatedly
makes the LEDs brighter.
In addition to the camera button, Easi-View has a
3.5mm mono jack socket so that external switches can
be used to take pictures.
Connecting to a PC
Plug the Easi-View into an available USB socket.
The first time Easi-View is connected to the PC, it will
automatically install the drivers and may require the
PC to be rebooted depending on your operating
system.
The PC will recognise the device as a USB Video
device and it will appear as a video device in the
Scanners and Cameras section in “My Computer”.
For Easi-View to work reliably, Computers with
internal web cams must have their web cams
disabled.

Easi-View User Guide
6
Installing Easi-View (PC Only)
The procedure below is for windows XP(Compatible
with Vista).
Connect the Easi-View to a
USB port on your PC. Insert
the CD into your PC and the
setup program should launch
automatically. If it does not
launch automatically, double
click the “setup.exe” icon. Click
the Install button to continue.
Click the next button to
continue.
The installer will now copy the
required files to your PC. It will
also install DirectX if required.
If you see this screen, click
“Continue anyway”.
Click “Finish” to complete the
installation.

Easi-View User Guide
7
Setting preview and snapshot resolution
The preview resolution can be set from the options
menu.
The Still picture resolution is set separately using the
snapshot menu.
Taking pictures
To take a picture use the snapshot button
on the base of the Easi-View, or simply
click on the “photo” icon. To view your

Easi-View User Guide
8
pictures, select “open my pictures” in the “View” menu
and navigate to the folder which will be saved in date
order.
If the image appears upside down, use
rotate to flip the image so it is viewed
correctly.
The Easi-View has an autofocus feature.
You can re-focus at any time by clicking on
the focus icon.
Video capture
To capture live video, just click on the
“video” icon. The icon will turn red and
you will be asked for confirmation. To stop
recording, just click on the icon once more.
In the “capture” menu, there is an option to set the
maximum capture time to prevent very large files being
created
Using Easi-View as a Web Cam
The Easi-View has a built in microphone and can be
used as a web cam with popular applications such as
Messenger.

Easi-View User Guide
9
Technical specification
3.0 Mega Pixel true resolution
Auto Focus (10cm minimum)
8 Super bright LEDs
Troubleshooting
Easi-View is designed to work reliably and predictably in
all normal conditions. However, it is possible that
problems may occur. Please check the following before
contacting technical support.
Problem
Auto Focus does not function
Solution
The PC has an internal web cam. This
web cam must be disabled for your Easi-
View to work correctly.
Problem
Image is too dark
Solution
Press the light button or use an external
light source.
Support & Warranty
This product is provided with a one-year warranty for
problems found during normal usage. Mistreating the
Easi-View™ or opening the unit will invalidate this

Easi-View User Guide
10
warranty. All out of warranty repairs will be subject to a
replacement fee.
Please visit www.tts-group.co.uk for latest product
information.
Email [e-mail] for technical
support.
TTS Group Ltd Freephone: 0800 318686
Park Lane Business Park Freefax: 0800 137525
Kirkby-in-Ashfield
Nottinghamshire, UK
NG17 9GU