Recharging the Battery
Your metal detector has a built in
rechargeable battery.
To re-charge, simply insert the Metal
Detector into its docking station and connect
the external power supply to begin charging.
The green LED on the docking staion will
light when powered.
International Charger
The safety isolating transformer to be used with the Docking Station should be
regularly examined for potential hazards such as damage to the cable, cord, plug,
enclosure or other parts. In the event of any damage, the Docking Station must not be
used until any damage has been properly repaired.
The Docking Station is not intended for children under 3 years old.
The transformer is not a toy.
The Docking Station must only be used with the recommended transformer.
The docking station is supplied with a multi-
region adaptor. The adaptor is supplied with the
UK plug fitted but you can change this easily to
suit any country. Press the release button and
slide the UK plug out and replace it with the
required plug module. Slide the plug module in
until it “clicks” in place securely.