Tufferman STORALEX HRX WORKBENCH User manual

MULTI-FUNCTIONAL
BOLTLESS SHELVING
www.storalex.com
HRX WORKBENCH
COMPONENT CHECKLIST
JUST TAP
TOGETHER
NO NUTS NO BOLTS
4 x UPRIGHTS
2 x CHIPBOARD DECKS
4 x FRONT & BACK BEAMS
4 x SIDE BEAMS
4 x FEET 4 x SUPPORT BEAMS
SUPPLIED BY
0203 764 9380
[email protected].uk
www.tufferman.co.uk
GLOVES
RECOMMENDED
ENSURE FLOOR
IS EVEN
DISTRIBUTE LEVELS
EVENLY
DO NOT USE IN
A DAMP/HUMID
ENVIRONMENT
DISTRIBUTE WEIGHT
EVENLY
DO NOT USE
DEFECTIVE
COMPONENTRY
IMPORTANT INFORMATION
• Please read the instructions carefully before you start assembling to
ensure you have all the components listed
• It is much easier to assemble with 2 people
• You should only require a fl at-headed screwdriver and a rubber mallet
BE CAREFUL WHEN ASSEMBLING
• Take care not to stretch or lift awkwardly
• Make sure the fl oor is level
• Use of protective gloves and footwear are recommended
• Please consider the environment when disposing of all packaging
WARNING
• Do not stand or climb on the shelves
• Not suitable for use in damp or wet conditions
• Never lean any objects such as ladders or steps against the shelves
• It is recommended that the units are fi xed to the wall for safety
• Never exceed the maximum UDL loadings
www.storalex.com
Tufferman-HRX-workbench-Instructions-V3.indd 1 11/07/2019 14:28

1
4 5
789
6
10
2 3
Fit the plastic feet to each of the 4 uprights. Grab two uprights and two side (short) beams and gently tap the side beams
into place at the top and the bottom to form the side frame and repeat.
Once you’ve built the side frames, move them into position,
ready to attach the front and back beams.
Max. 20cm
www.storalex.com ASSEMBLY INSTRUCTIONS
PLEASE READ OUTER LEAFLET FIRST & TAKE CARE WHEN CONSTRUCTING
Gently tap the front and back beams into place.
Check that you’re happy with the position
of the support beams.
Your frame should look similar to the above
(check you have enough room for your feet to go under). Now twist and lock the support beams into place.
Insert the chipboard decks. Your workbench is ready to use. Please recycle your packaging where possible.
Tufferman-HRX-workbench-Instructions-V3.indd 2 11/07/2019 14:28