TROUBLESHOOTING AND OPERATING INSTRUCTIONS
After the router is connected to the electrical power source, the power indicator (no.
2) must always be lit up. If this LED is dark and the router is not working, check the
power connection.
Note: because the LEDs can be turned off by pressing button (no. 7), make sure that
they have not been disabled by pressing the button again when you are checking
the power connection.
Important: Make sure that you are using a power adapter labelled Turris Omnia
(12V, 3.33A).
If the router suddenly stops working or does not work correctly, you can restart it
by briefly pressing the reset button (no. 11) on the rear panel of the device.
If you forget your password to access the router or accidentally make the router
unavailable through a change of configuration, you can restore the device to the
factory settings by pressing and holding the reset button (no. 11) for five seconds.
The device will confirm the return to factory settings with three flashing LEDs on
the front panel. After the process finishes, the router automatically restarts.
Important: Restoring the factory settings deletes all user data and settings!
Pressing the reset button (no. 11) for different time periods than five seconds
sets the device to advanced recovery modes. More information is available at
https://omnia.turris.cz/en.
SAFETY INFORMATION
Keep the device dry and prevent collisions with other objects when storing, transporting and using the device.
Do not allow contact with water or humidity and keep the device and its accessories dry. Only handle the device
with dry hands, and if possible disconnect it from the power source. Always keep the device at a sufficient
distance (1-2 metres) from sources of heat and fire, such as heaters or candles. Keep the device at a sufficient
distance from electrical appliances that generate a strong electromagnetic field, such as microwave ovens or
refrigerators. Place the device in a cool, well-ventilated location. Intended for indoor use only. Do not expose
to direct sunlight. The operating temperatures of the device are 0°C to 40°C. Do not cover the device with
any objects. Keep at least 10cm of free space around the device to ensure that the heat generated can freely
dissipate. If any object or liquid gets into the device, turn it off immediately. Unplug the power supply and all
other cables. Turn off the device during thunderstorms and unplug all cables to prevent lightning damage.
Only use the power adapter in a power grid that meets the parameters listed in the adapter’s specifications. A
mismatch in the power supply could cause fire and damage to the power adapter or the device. Do not use the
power adapter if it is damaged. Doing so may cause an electric shock. It is normal for the device to generate
heat during operation. Keep the device and all accessories clean and use it in a dust-free environment. Keep
the device and its accessories out of the reach of children.
DISPOSAL
This device may not be disposed of in household waste. To ensure proper disposal of the product, deliver the
used equipment to a designated collection point, where it will be accepted free of charge.
Proper disposal of the product helps conserve natural resources and prevents any potential negative impact on
the environment and human health that could result from incorrect waste disposal.
DEVICE DOES NOT
RESPOND, INDICATION
LEDS DO NOT LIGHT UP
RESTARTING THE DEVICE
RESET TO FACTORY
SETTINGS
INSTRUCTIONS
