4
1.2 Product Warning:
1.2.1 Do not adjust the TPMS receiver while driving. The company is exempt from all consequences
because of driver’s careless and improper operation.
1.2.2 The system uses wireless RF transmission signals. In some special circumstances, interference or
erroneous methods of operation or installation may cause weaker signal or its inability to receive
signals. If the insulation adhesive sticker of the windshield contains metal material, it may affect
signal reception. If the tire pressure and temperature readings on the TPMS receiver are displayed
as “---”, this indicates that the receiver is not receiving the signals emitted by the sensors. Drive the
vehicle away from the current location (where there may be some signal interference) or drive the
vehicle to a tire shop to check.
1.2.3 If the battery status of the TPMS sensors inside the tire is low, “---” will be shown on the receiver
display (if abnormal conditions continue to occur, the TPMS sensors will continuously emit signals
to warn the driver, resulting in shorter sensor battery life). Please go as soon as possible to a
service station to confirm whether the TPMS Sensors need to be replaced.
1.2.4 Temporary resealing or re-inflation products containing internal sealants or propellants in any tire
assembly may adversely affect the operation of the sensor/transmitter. The product manufacturer
does not assume any liability as to the customer’s use of internal sealants or propellants with the
tire sensors used with this TPMS.
1.2.5 Do not leave the sensors in contact with chemicals, it may cause the sensors to fail.
