Tutti Bambini KOJI User manual

Assembly Instructions
®

Tutti Frutti Direct Ltd. Unit 3, 1000 North Circular Road, London, UK, NW2 7JP
t: [phone]
e: [e-mail]
www.tuttibambini.com
IMPORTANT: RETAIN FOR FUTURE REFERENCE. READ CAREFULLY
To ensure that your pushchair is used in accordance with these instructions,
please read them fully. This pushchair conforms to EN 1888:2012 and is
guaranteed for 12 months from the date of purchase against manufacturin
defects. Your child’s safety may be affected if you do not follow these
instructions. This stroller is intended to carry child from birth up to a maximum
weight of 15kgs.
WARNING: A child’s safety is your responsibility
WARNING: Ensure that all locking devices are engaged before use
WARNING: Children should be harnessed in at all times.
Always use the crotch strap in combination with the waist belt
WARNING: DO NOT hang shopping bags from the handle as thismay affect the
pushchairs stability. Use the basket provided - maximum weight 5kgs.
WARNING: This product is not suitable for running or skating.
Never run or skate with your pushchair.
WARNING: It may be dangerous to leave your child unattended.
WARNING: Do not use this product as a bed, your child may
become tangled in straps and suffocate.
WARNING: The child should be clear of moving parts while making adjustments
or opening or folding the pushchair. Risk of serious injury (entrapment, laceration
or amputation) exists.
WARNING: Do not let your child play with this product
WARNING: Check that the pram body, seat unit or car seat attachment devices
are correctly engaged before use.
WARNING: Check that the pram body, seat unit or car seat attachment devices
are correctly engaged before use.
The pushchair should be used in the furthest reclined ‘lie flat’ position for new
born babies.
Accessories not approved by the manufacturer should not be used with this
product.
Only replacement parts supplied or recommended by the
manufacturer/distributor shall be used.
Hello
Congratulations on your new arrival!
We’re so pleased that you have chosen our KOJI® pushchair
for your baby.
Please take a few moments to read this guide on how to use the KOJI®
correctly so you can rest assured that your little one is safe and secure
in their pushchair.
Wishing you the best of luck on your new journey,
Meet KOJI®, the little yet large pushchair perfect for active parents who are
always out and about. KOJI® is a compact and lightweight stroller, perfect for
city life. It offers a choice of two chassis colours and five accessory pack
colours, allowing full customisation of your pushchair to suit your style.
KOJI® features a lie flat seat which is suitable from birth, that can be used in street
or parent facing modes. An optional carrycot is also available which is suitable for
overnight sleeping.
This stroller has a one hand mechanism which allows you to fold it with ease.
It also collapses with the seat unit still on, providing a space saving and has-
sle-free solution when storing. With smooth steering and cantilever suspension
on all four wheels, this pushchair is easy to manoeuvre ensuring your little one
experiences a smooth ride.
The pushchair accessory pack (sold separately) is made from a water and oil
repellent melange fabric and includes a hood, seat liner, shoulder and crotch
pads. The hood features an extendable panel which provides full cover from the
sun wind and rain. It also has a further extendable UV protective sun visor, and
a concealed mesh window with a magnetic flap so that you can check on your
little one at all times. The padded seat liner and shoulder and crotch pads will
keep your child comfortable, and easily fit over the 5-point safety harness on your
pushchair seat.
Team Tutti
Conforms to BS EN1888:2012 and EN1466

Contents
Chassis
Fitting/removing the front wheels 6
Fitting/removing the rear wheels 6
Opening the chassis 6
Operating the parking brake 9
Operating the front swivel wheel 9
Adjusting the handle height 10
Folding the chassis 10
Seat Unit
Fitting the seat unit to the chassis 15
Adjusting the seat unit 15
Adjusting the calf support 15
Using the 5 point safety harness 16
Removing the seat unit from the chassis 16
Fitting the seat unit hood (sold separately) 17
Fitting the seat liner (sold separately) 18
Fitting the shoulder and crotch pads (sold separately) 18
Fitting the rain cover 18
Carrycot (sold separately)
Assembling the carrycot 19
Fitting the carrycot hood (sold separately) 19
Fitting the carrycot apron (sold separately) 20
Fitting the carrycot to the chassis 20
Removing the carrycot from the chassis 21
Car Seat (sold separately)
Fitting the car seat to the chassis 22
Removing the car seat from the chassis 22
Care and maintenance 24
Parts List
Chassis
• 2 x Front swivel wheels
• 2 x Rear wheels
• Seat Unit
• Hood (sold separately)
• Seat pad (sold separately)
• Shoulder and crotch straps (sold separately)
• Basket
• Rain cover
Carrycot
• Mattress
• Liner
• Hood (sold separately)
• Apron (sold separately)
4 5
www.tuttibambini.com www.tuttibambini.com

Chassis
6 7
www.tuttibambini.com www.tuttibambini.com
Chassis
1. Fitting/removing the front wheels
Press the metal pins of the front wheels into the
designated holes at the front of the chassis until
they click into place. There is no left and right.
Check the wheels are secure by pulling down on
them. To remove, press the quick release button
on the side of the wheel housing.
From the handle, pull upwards and the front of the
chassis will spring forwards. Note: the handle will
extend as you open the chassis.
2. Fitting/removing the rear wheels
Press the metal pins of the rear wheels into the
designated holes at the back of the chassis until
they click into place. There is no left and right.
Check the wheels are secure by pulling them
outwards. To remove, pull down on the quick
release button on the inside of the wheel housing.
You can also rest your foot on the rear wheel support
bar for extra stability when opening.
3. Opening the Chassis
In forward facing mode: Lay the chassis flat on the
floor with the handle facing upwards.
Adjust the seat back rest to the desired height,
by lifting the adjustment handle at the back of
the seat unit. Note: the handle will extend as you
open the chassis.

Chassis
8 9
www.tuttibambini.com www.tuttibambini.com
Chassis
In rear facing mode: Lay the chassis flat on the floor
with the handle facing upwards.
Adjust the seat back rest to the desired hieght,
by lifting the adjustment handle at the back of
the seat unit.
From the handle, pull upwards and the front of the
chassis will spring forwards.
Note: the handle will extend as you open
the chassis.
You can also rest your foot on the rear wheel support
bar for extra stability when opening.
4. Operating the parking brake
Press downwards on the parking brake pedal
with your foot to activate the parking brake.
Press downwards on the pedal again to
deactivate the parking brake. WARNING: Never
leave the pushchair without first fully engaging
the parking brake.
5. Operating the front swivel wheel
Flick the small grey lever on the back of the
front wheel housing to switch between fixed
and swivel wheels.

10 11
www.tuttibambini.com www.tuttibambini.com
ChassisChassis
Pull or push the handle upwards or downwards until
the handle has clicked into place at your desired
height. Clip the two handle locks back into place to
secure the handle. Note: The handle has multiple
positions.
4. Adjusting the handle height
Unclip the two handle locks on either side of the
chassis frame by pulling them inwards.
Unclip the two handle locks on either side of the
chassis frame by pulling them inwards.
In forward facing mode: Fold the seat in half by
pulling the adjustment handle at the back of the
seat, and pushing the backrest all the way forwards.
5. Folding the chassis
In forward facing mode: Fold the seat in half by
pulling the adjustment handle at the back of the
seat, and pushing the backrest all the way forwards.
Push the handle downwards to the lowest height.

12 13
www.tuttibambini.com www.tuttibambini.com
Chassis
Chassis
Using your thumb, slide the lock on the handle bar
inwards.
Pull the handle towards the ground, holding
the chassis by the central bar, so that it stands
upright by itself.
Recline the seat all the way backwards.
Fold the calf support inwards to reduce the
folded size.
In rear facing mode: Fold the seat in half by pulling
the adjustment handle at the back of the seat, and
pushing the backrest all the way forwards.
Unclip the two handle locks on either side of the
chassis frame by pulling them inwards.

14 www.tuttibambini.com
Chassis
15
www.tuttibambini.com
Seat Unit
1. Fitting the seat unit to the chassis
Insert the seat unit connectors into the main
housing on the chassis, until it clicks into place.
Note: the seat can be used in forward or
parent facing mode.
2. Adjusting the seat unit
Lift the seat adjustment handle at the back of the
seat unit and pull the seat backwards or forwards,
letting go of the handle at the desired position.
The seat will lock into place. There are 3
seat positions.
3. Adjusting the calf support
Pull the handle on the underside of the calf support,
and raise or lower letting go at the desired position.
The calf support will lock into place. The calf support
has 3 positions.
Push the handle downwards to the lowest height.
Using your thumb, slide the lock on the handle bar
inwards and squeeze the handle.
Pull the handle towards the ground, holding the
chassis by the central bar, so that it stands upright
by itself.

16 www.tuttibambini.com
Seat Unit
17
www.tuttibambini.com
Seat Unit
4. Using the 5 point safety harness
To release the 5 point safety harness, press the central
button on the buckle housing. The top buckles pull
apart as shown in the image. To lock the safety har-
ness, press the top buckles together as shown in the
image, and clip all 4 buckles into the central buckle
housing.
The shoulder straps can be altered by adjusting the
sliders on the harness. The position of the buckles
can be altered as your child grows by threading the
buckle through the seat back at the higher position.
5. Removing the seat unit from
the chassis
Squeeze the two handles on either side of the
seat unit and lift the seat upwards out of the
main housing on the chassis.
Finally, click the hood bar back into the two slots on
the seat unti until they click into place.
6. Fitting the seat unit hood
(sold separately)
Align the back of the pushchair hood to the back of
the seat unit, and push the seat adjustment handle
through the hole in the hood.
7. Fitting the seat liner
(sold separately)
Feed the shoulder and crotch straps through the
holes in the seat liner so that they align with their
positions on the seat unit, and pull them all the
way through.

18 19
www.tuttibambini.com www.tuttibambini.com
Carrycot (Sold Separately)
Secure the seat liner to the seat unit by fastening the
press studs at the top of the seat liner, and to the
back rest and seat (via the gap between the two).
8. Fitting the shoulder and crotch pads
(sold separately)
Attach the shoulder pads around the shoulder
straps and secure using the Velcro provided.
Feed the crotch strap through the hole in the
crotch pad as shown in the image.
9. Fitting the rain cover
Drape the raincover over the seat unit and fasten the
velcro straps together at the front, back and sides of
the pushchair to secure into place.
Seat Unit
1. Assembling the carrycot
Remove the mattress and lining to gain access to the
assembly bars at the bottom of the carrycot. Using the
tabs provided, pull the bars until they click into place
on the carrycot base. Put the lining and mattress back
into the carrycot. WARNING: Ensure that the
assembly bars are fully engaged before using
the carrycot.
2. Fitting the carrycot hood
(sold separately)
Zip the lower end of the carrycot hood onto the zip
on the carrycot and pull all the way around.
Zip the two padded ends of the carrycot hood around
the carrycot hood bar towards the handle, ensuring
that leatherette handle can be accessed through the
handle hole.

20 21
www.tuttibambini.com www.tuttibambini.com
Carrycot (Sold Separately)Carrycot (Sold Separately)
4. Fitting the carrycot to the chassis
First place the carrycot adapters (supplied with
the carrycot) onto the chassis, with the arrows
facing the direction that you want to place the
carrycot. The yellow markers on the adapters
should face inwards.
Then lower the carrycot onto the adapters until
they click into place.
3. Fitting the carrycot apron
(sold separately)
Zip the carrycot apron onto the zip on the carrycot
and pull all the way around.
5. Removing the carrycot from
the chassis
Press the two buttons on the carrycot
adapters inwards
Lift the carrycot upwards from the handle.
The carrycot adapters can be removed from the
chassis by squeezing the handles and lifting off.

Car Seat (Sold Separately)
1. Fitting the car seat to the chassis
First place the car seat adapters (supplied with the
car seat) onto the chassis, with the arrows facing
the direction that you want to place the car seat.
The yellow markers on the adapters should face
inwards.
Then lower the car seat onto the adapters until they
click into place.
2. Removing the car seat from
the chassis
Press the two buttons on the car seat
adapters inwards.
22 www.tuttibambini.com
Car Seat (Sold Separately)
23
www.tuttibambini.com
Lift the car seat upwards from the handle.
The car seat adapters can be removed from the
chassis by squeezing the handles and lifting off.

PT Care and Maintenance
• For cleaning, use only a mild detergent and warm water.
• DO NOT USE BLEACH.
• DO NOT USE any abrasive substances.
• From time to time, check your pushchair for loose screws,
worn parts, torn material or stitching.
• Replace or adjust the parts needed.
• This pushchair requires regular maintenance by the user.
• Overloading, incorrect folding and the use of non-approved
accessories may cause damage or break the pushchair.
• It may be unsafe to use replacement parts or accessories e.g. child
seats, bag hooks, rain covers, etc, other than those approved by the
manufacturer or distributor.
• Always balance the weight of the pushchair evenly.
• We advise that your pushchair is not stored or left outside
at any time.
Notes
25
www.tuttibambini.com

Notes
26 www.tuttibambini.com
Notes
27
www.tuttibambini.com

www.tuttibambini.com
Join Us
Follow us on Facebook
TuttiBambiniUK
Follow us on Twitter
TuttiBambiniUK
Follow us on Instagram
TuttiBambiniUK