TUYA Wifi Battery Camera User manual

Instruction Manual
WIFI BATTERY CAMERA
Please read it carefully before using the device and keep this handy.
Technical Parameters:
Resolution: 720X1280 1920X1080 Video bit rate: adaptive
Viewing angle:135-165° Support capacity: Up to 128G
Audio: Built-in speaker & Microphone WiFi Mode: 2.4GHz 802.11n/g/n
Power Supply: DC 5V Battery: Rechargeable Battery
Motion Detection: PIR Sensor
Recording method: SD Memory Card/ Cloud Storage
Power consumption: Standby 200uA, Working 260mA
Product categories
Reset Button
Reset Button
Reset Button
Reset Button
Reset Button
Reset Button
Reset Button
Reset Button
Reset Button
Loudspeakers
Loudspeakers
Loudspeakers
Loudspeakers
Loudspeakers
Loudspeakers
Loudspeakers
battery
battery
battery
Loudspeakers
Loudspeakers Loudspeakers
(optional)
solar panel
TF Card Slot
TF Card Slot
TF Card Slot
TF Card Slot
TF Card Slot
TF Card Slot
TF Card Slot
TF Card Slot
TF Card Slot
USB
Charging Port
USB Charging Port
USB
Charging Port
USB Charging Port
USB Charging Port
USB Charging Port
USB Charging Port
USB Charging Port
Bottom
Bottom
Bottom
Bottom
Bottom
Bottom
Top
Top
Back
Back
DIRECTORY
Product categories 1
Technical Parameters 4
APP Download&Installation 5
Register and log in 5
Add Device 6
View&Setting 9
FAQ 9
Device prompt and indicator condition 10
1 2 3 4

Instruction Manual
WIFI BATTERY CAMERA
Please read it carefully before using the device and keep this handy.
Technical Parameters:
Resolution: 720X1280 1920X1080 Video bit rate: adaptive
Viewing angle:135-165° Support capacity: Up to 128G
Audio: Built-in speaker & Microphone WiFi Mode: 2.4GHz 802.11n/g/n
Power Supply: DC 5V Battery: Rechargeable Battery
Motion Detection: PIR Sensor
Recording method: SD Memory Card/ Cloud Storage
Power consumption: Standby 200uA, Working 260mA
Product categories
Reset Button
Reset Button
Reset Button
Reset Button
Reset Button
Reset Button
Reset Button
Reset Button
Reset Button
Loudspeakers
Loudspeakers
Loudspeakers
Loudspeakers
Loudspeakers
Loudspeakers
Loudspeakers
battery
battery
battery
Loudspeakers
Loudspeakers Loudspeakers
(optional)
solar panel
TF Card Slot
TF Card Slot
TF Card Slot
TF Card Slot
TF Card Slot
TF Card Slot
TF Card Slot
TF Card Slot
TF Card Slot
USB
Charging Port
USB Charging Port
USB
Charging Port
USB Charging Port
USB Charging Port
USB Charging Port
USB Charging Port
USB Charging Port
Bottom
Bottom
Bottom
Bottom
Bottom
Bottom
Top
Top
Back
Back
DIRECTORY
Product categories 1
Technical Parameters 4
APP Download&Installation 5
Register and log in 5
Add Device 6
View&Setting 9
FAQ 9
Device prompt and indicator condition 10
1 2 3 4

Instruction Manual
WIFI BATTERY CAMERA
Please read it carefully before using the device and keep this handy.
Technical Parameters:
Resolution: 720X1280 1920X1080 Video bit rate: adaptive
Viewing angle:135-165° Support capacity: Up to 128G
Audio: Built-in speaker & Microphone WiFi Mode: 2.4GHz 802.11n/g/n
Power Supply: DC 5V Battery: Rechargeable Battery
Motion Detection: PIR Sensor
Recording method: SD Memory Card/ Cloud Storage
Power consumption: Standby 200uA, Working 260mA
Product categories
Reset Button
Reset Button
Reset Button
Reset Button
Reset Button
Reset Button
Reset Button
Reset Button
Reset Button
Loudspeakers
Loudspeakers
Loudspeakers
Loudspeakers
Loudspeakers
Loudspeakers
Loudspeakers
battery
battery
battery
Loudspeakers
Loudspeakers Loudspeakers
(optional)
solar panel
TF Card Slot
TF Card Slot
TF Card Slot
TF Card Slot
TF Card Slot
TF Card Slot
TF Card Slot
TF Card Slot
TF Card Slot
USB
Charging Port
USB Charging Port
USB
Charging Port
USB Charging Port
USB Charging Port
USB Charging Port
USB Charging Port
USB Charging Port
Bottom
Bottom
Bottom
Bottom
Bottom
Bottom
Top
Top
Back
Back
DIRECTORY
Product categories 1
Technical Parameters 4
APP Download&Installation 5
Register and log in 5
Add Device 6
View&Setting 9
FAQ 9
Device prompt and indicator condition 10
1 2 3 4

Instruction Manual
WIFI BATTERY CAMERA
Please read it carefully before using the device and keep this handy.
Technical Parameters:
Resolution: 720X1280 1920X1080 Video bit rate: adaptive
Viewing angle:135-165° Support capacity: Up to 128G
Audio: Built-in speaker & Microphone WiFi Mode: 2.4GHz 802.11n/g/n
Power Supply: DC 5V Battery: Rechargeable Battery
Motion Detection: PIR Sensor
Recording method: SD Memory Card/ Cloud Storage
Power consumption: Standby 200uA, Working 260mA
Product categories
Reset Button
Reset Button
Reset Button
Reset Button
Reset Button
Reset Button
Reset Button
Reset Button
Reset Button
Loudspeakers
Loudspeakers
Loudspeakers
Loudspeakers
Loudspeakers
Loudspeakers
Loudspeakers
battery
battery
battery
Loudspeakers
Loudspeakers Loudspeakers
(optional)
solar panel
TF Card Slot
TF Card Slot
TF Card Slot
TF Card Slot
TF Card Slot
TF Card Slot
TF Card Slot
TF Card Slot
TF Card Slot
USB
Charging Port
USB Charging Port
USB
Charging Port
USB Charging Port
USB Charging Port
USB Charging Port
USB Charging Port
USB Charging Port
Bottom
Bottom
Bottom
Bottom
Bottom
Bottom
Top
Top
Back
Back
DIRECTORY
Product categories 1
Technical Parameters 4
APP Download&Installation 5
Register and log in 5
Add Device 6
View&Setting 9
FAQ 9
Device prompt and indicator condition 10
1 2 3 4

Instruction Manual
WIFI BATTERY CAMERA
Please read it carefully before using the device and keep this handy.
Technical Parameters:
Resolution: 720X1280 1920X1080 Video bit rate: adaptive
Viewing angle:135-165° Support capacity: Up to 128G
Audio: Built-in speaker & Microphone WiFi Mode: 2.4GHz 802.11n/g/n
Power Supply: DC 5V Battery: Rechargeable Battery
Motion Detection: PIR Sensor
Recording method: SD Memory Card/ Cloud Storage
Power consumption: Standby 200uA, Working 260mA
Product categories
Reset Button
Reset Button
Reset Button
Reset Button
Reset Button
Reset Button
Reset Button
Reset Button
Reset Button
Loudspeakers
Loudspeakers
Loudspeakers
Loudspeakers
Loudspeakers
Loudspeakers
Loudspeakers
battery
battery
battery
Loudspeakers
Loudspeakers Loudspeakers
(optional)
solar panel
TF Card Slot
TF Card Slot
TF Card Slot
TF Card Slot
TF Card Slot
TF Card Slot
TF Card Slot
TF Card Slot
TF Card Slot
USB
Charging Port
USB Charging Port
USB
Charging Port
USB Charging Port
USB Charging Port
USB Charging Port
USB Charging Port
USB Charging Port
Bottom
Bottom
Bottom
Bottom
Bottom
Bottom
Top
Top
Back
Back
DIRECTORY
Product categories 1
Technical Parameters 4
APP Download&Installation 5
Register and log in 5
Add Device 6
View&Setting 9
FAQ 9
Device prompt and indicator condition 10
1 2 3 4

1
FAQ
Q:How to share the device ?
A:In real-time video viewing screen, click the top right corner device
button to enter setup interface, click the "share equipment", then click
"add device", sharing by entering mobile number or email address, click
A:1.Check the power supply andthe network if it is normal
2.Restart the device
4.Check whether the home broadband is normal
APP Download&Installation
1:Quick download APP by scanning QR Code as following.
Add Device
In APP Home page, click on the "Add Device" or upper right "+", you can
Please make sure the camera in distribution network model (status
heard“,click “Next”.
2:Search for 'TuyaSmart ' app in App Store(for IOS)/App Market, or scan
the above QR code to download.
This camera only support 2.4G WiFi, not support 5G
retuordnaenohpeht,erusekamesaelpdnaretuoriFiW
Network is 2.4 G WiFi connection
To ensure the normal use of the APP function, when
installing "TuyaSmart" APP, please allow and open the APP
all permissions!
Register and log in
enter the registration screen, enter a phone number registered account.
Registration is completed, then login APP.
After login the APP, can be directly select "add device" or choose to
create family after add, create family methods: APP at the bottom right
you can name for this device
View&Setting
Click device, enter the camera preview control interface (figure 10),
interface display picture, for clarity and full screen switch operations and,
at the bottom of the menu can provide photos, intercom, video playback,
alarm Settings, pendant, direction and so on.
Click upper right Setting button, and enter the Settings interface (as
and so on.
Device prompt and indicator condition
Prompt state Device state
Drop 1 sound
Equipment in accordance with the "reset button"
5 seconds, enter the reset state instantly, 1
"drop" sound equipment
Drop 2 sound
Distribution network process, equipment, lens
scanning QR code APP instant success, sound
equipment "drops" 2
Soft Music
In the process of distribution network, equipment
successfully connected ,routers equipment will
play some soft music
Indicator State Device state
Device reset (wait for distribution network state,)
long press equipment "reset button" 5 seconds
Device is in wake-up sate and has been
successfully connected routers and servers
and router disconnected or router network)
No lighting Device was sleeping or blackout or user active
closed working indicator light
status)
APP appear QR Code distribution network guide interface, aim the QR
click on the "I Heard a Prompt" , enter the next step;
Equipment began to connect to the server, please wait until the complete
765 8 9 10

1
FAQ
Q:How to share the device ?
A:In real-time video viewing screen, click the top right corner device
button to enter setup interface, click the "share equipment", then click
"add device", sharing by entering mobile number or email address, click
A:1.Check the power supply andthe network if it is normal
2.Restart the device
4.Check whether the home broadband is normal
APP Download&Installation
1:Quick download APP by scanning QR Code as following.
Add Device
In APP Home page, click on the "Add Device" or upper right "+", you can
Please make sure the camera in distribution network model (status
heard“,click “Next”.
2:Search for 'TuyaSmart ' app in App Store(for IOS)/App Market, or scan
the above QR code to download.
This camera only support 2.4G WiFi, not support 5G
retuordnaenohpeht,erusekamesaelpdnaretuoriFiW
Network is 2.4 G WiFi connection
To ensure the normal use of the APP function, when
installing "TuyaSmart" APP, please allow and open the APP
all permissions!
Register and log in
enter the registration screen, enter a phone number registered account.
Registration is completed, then login APP.
After login the APP, can be directly select "add device" or choose to
create family after add, create family methods: APP at the bottom right
you can name for this device
View&Setting
Click device, enter the camera preview control interface (figure 10),
interface display picture, for clarity and full screen switch operations and,
at the bottom of the menu can provide photos, intercom, video playback,
alarm Settings, pendant, direction and so on.
Click upper right Setting button, and enter the Settings interface (as
and so on.
Device prompt and indicator condition
Prompt state Device state
Drop 1 sound
Equipment in accordance with the "reset button"
5 seconds, enter the reset state instantly, 1
"drop" sound equipment
Drop 2 sound
Distribution network process, equipment, lens
scanning QR code APP instant success, sound
equipment "drops" 2
Soft Music
In the process of distribution network, equipment
successfully connected ,routers equipment will
play some soft music
Indicator State Device state
Device reset (wait for distribution network state,)
long press equipment "reset button" 5 seconds
Device is in wake-up sate and has been
successfully connected routers and servers
and router disconnected or router network)
No lighting Device was sleeping or blackout or user active
closed working indicator light
status)
APP appear QR Code distribution network guide interface, aim the QR
click on the "I Heard a Prompt" , enter the next step;
Equipment began to connect to the server, please wait until the complete
765 8 9 10

1
FAQ
Q:How to share the device ?
A:In real-time video viewing screen, click the top right corner device
button to enter setup interface, click the "share equipment", then click
"add device", sharing by entering mobile number or email address, click
A:1.Check the power supply andthe network if it is normal
2.Restart the device
4.Check whether the home broadband is normal
APP Download&Installation
1:Quick download APP by scanning QR Code as following.
Add Device
In APP Home page, click on the "Add Device" or upper right "+", you can
Please make sure the camera in distribution network model (status
heard“,click “Next”.
2:Search for 'TuyaSmart ' app in App Store(for IOS)/App Market, or scan
the above QR code to download.
This camera only support 2.4G WiFi, not support 5G
retuordnaenohpeht,erusekamesaelpdnaretuoriFiW
Network is 2.4 G WiFi connection
To ensure the normal use of the APP function, when
installing "TuyaSmart" APP, please allow and open the APP
all permissions!
Register and log in
enter the registration screen, enter a phone number registered account.
Registration is completed, then login APP.
After login the APP, can be directly select "add device" or choose to
create family after add, create family methods: APP at the bottom right
you can name for this device
View&Setting
Click device, enter the camera preview control interface (figure 10),
interface display picture, for clarity and full screen switch operations and,
at the bottom of the menu can provide photos, intercom, video playback,
alarm Settings, pendant, direction and so on.
Click upper right Setting button, and enter the Settings interface (as
and so on.
Device prompt and indicator condition
Prompt state Device state
Drop 1 sound
Equipment in accordance with the "reset button"
5 seconds, enter the reset state instantly, 1
"drop" sound equipment
Drop 2 sound
Distribution network process, equipment, lens
scanning QR code APP instant success, sound
equipment "drops" 2
Soft Music
In the process of distribution network, equipment
successfully connected ,routers equipment will
play some soft music
Indicator State Device state
Device reset (wait for distribution network state,)
long press equipment "reset button" 5 seconds
Device is in wake-up sate and has been
successfully connected routers and servers
and router disconnected or router network)
No lighting Device was sleeping or blackout or user active
closed working indicator light
status)
APP appear QR Code distribution network guide interface, aim the QR
click on the "I Heard a Prompt" , enter the next step;
Equipment began to connect to the server, please wait until the complete
765 8 9 10

1
FAQ
Q:How to share the device ?
A:In real-time video viewing screen, click the top right corner device
button to enter setup interface, click the "share equipment", then click
"add device", sharing by entering mobile number or email address, click
A:1.Check the power supply andthe network if it is normal
2.Restart the device
4.Check whether the home broadband is normal
APP Download&Installation
1:Quick download APP by scanning QR Code as following.
Add Device
In APP Home page, click on the "Add Device" or upper right "+", you can
Please make sure the camera in distribution network model (status
heard“,click “Next”.
2:Search for 'TuyaSmart ' app in App Store(for IOS)/App Market, or scan
the above QR code to download.
This camera only support 2.4G WiFi, not support 5G
retuordnaenohpeht,erusekamesaelpdnaretuoriFiW
Network is 2.4 G WiFi connection
To ensure the normal use of the APP function, when
installing "TuyaSmart" APP, please allow and open the APP
all permissions!
Register and log in
enter the registration screen, enter a phone number registered account.
Registration is completed, then login APP.
After login the APP, can be directly select "add device" or choose to
create family after add, create family methods: APP at the bottom right
you can name for this device
View&Setting
Click device, enter the camera preview control interface (figure 10),
interface display picture, for clarity and full screen switch operations and,
at the bottom of the menu can provide photos, intercom, video playback,
alarm Settings, pendant, direction and so on.
Click upper right Setting button, and enter the Settings interface (as
and so on.
Device prompt and indicator condition
Prompt state Device state
Drop 1 sound
Equipment in accordance with the "reset button"
5 seconds, enter the reset state instantly, 1
"drop" sound equipment
Drop 2 sound
Distribution network process, equipment, lens
scanning QR code APP instant success, sound
equipment "drops" 2
Soft Music
In the process of distribution network, equipment
successfully connected ,routers equipment will
play some soft music
Indicator State Device state
Device reset (wait for distribution network state,)
long press equipment "reset button" 5 seconds
Device is in wake-up sate and has been
successfully connected routers and servers
and router disconnected or router network)
No lighting Device was sleeping or blackout or user active
closed working indicator light
status)
APP appear QR Code distribution network guide interface, aim the QR
click on the "I Heard a Prompt" , enter the next step;
Equipment began to connect to the server, please wait until the complete
765 8 9 10

1
FAQ
Q:How to share the device ?
A:In real-time video viewing screen, click the top right corner device
button to enter setup interface, click the "share equipment", then click
"add device", sharing by entering mobile number or email address, click
A:1.Check the power supply andthe network if it is normal
2.Restart the device
4.Check whether the home broadband is normal
APP Download&Installation
1:Quick download APP by scanning QR Code as following.
Add Device
In APP Home page, click on the "Add Device" or upper right "+", you can
Please make sure the camera in distribution network model (status
heard“,click “Next”.
2:Search for 'TuyaSmart ' app in App Store(for IOS)/App Market, or scan
the above QR code to download.
This camera only support 2.4G WiFi, not support 5G
retuordnaenohpeht,erusekamesaelpdnaretuoriFiW
Network is 2.4 G WiFi connection
To ensure the normal use of the APP function, when
installing "TuyaSmart" APP, please allow and open the APP
all permissions!
Register and log in
enter the registration screen, enter a phone number registered account.
Registration is completed, then login APP.
After login the APP, can be directly select "add device" or choose to
create family after add, create family methods: APP at the bottom right
you can name for this device
View&Setting
Click device, enter the camera preview control interface (figure 10),
interface display picture, for clarity and full screen switch operations and,
at the bottom of the menu can provide photos, intercom, video playback,
alarm Settings, pendant, direction and so on.
Click upper right Setting button, and enter the Settings interface (as
and so on.
Device prompt and indicator condition
Prompt state Device state
Drop 1 sound
Equipment in accordance with the "reset button"
5 seconds, enter the reset state instantly, 1
"drop" sound equipment
Drop 2 sound
Distribution network process, equipment, lens
scanning QR code APP instant success, sound
equipment "drops" 2
Soft Music
In the process of distribution network, equipment
successfully connected ,routers equipment will
play some soft music
Indicator State Device state
Device reset (wait for distribution network state,)
long press equipment "reset button" 5 seconds
Device is in wake-up sate and has been
successfully connected routers and servers
and router disconnected or router network)
No lighting Device was sleeping or blackout or user active
closed working indicator light
status)
APP appear QR Code distribution network guide interface, aim the QR
click on the "I Heard a Prompt" , enter the next step;
Equipment began to connect to the server, please wait until the complete
765 8 9 10

1
FAQ
Q:How to share the device ?
A:In real-time video viewing screen, click the top right corner device
button to enter setup interface, click the "share equipment", then click
"add device", sharing by entering mobile number or email address, click
A:1.Check the power supply andthe network if it is normal
2.Restart the device
4.Check whether the home broadband is normal
APP Download&Installation
1:Quick download APP by scanning QR Code as following.
Add Device
In APP Home page, click on the "Add Device" or upper right "+", you can
Please make sure the camera in distribution network model (status
heard“,click “Next”.
2:Search for 'TuyaSmart ' app in App Store(for IOS)/App Market, or scan
the above QR code to download.
This camera only support 2.4G WiFi, not support 5G
retuordnaenohpeht,erusekamesaelpdnaretuoriFiW
Network is 2.4 G WiFi connection
To ensure the normal use of the APP function, when
installing "TuyaSmart" APP, please allow and open the APP
all permissions!
Register and log in
enter the registration screen, enter a phone number registered account.
Registration is completed, then login APP.
After login the APP, can be directly select "add device" or choose to
create family after add, create family methods: APP at the bottom right
you can name for this device
View&Setting
Click device, enter the camera preview control interface (figure 10),
interface display picture, for clarity and full screen switch operations and,
at the bottom of the menu can provide photos, intercom, video playback,
alarm Settings, pendant, direction and so on.
Click upper right Setting button, and enter the Settings interface (as
and so on.
Device prompt and indicator condition
Prompt state Device state
Drop 1 sound
Equipment in accordance with the "reset button"
5 seconds, enter the reset state instantly, 1
"drop" sound equipment
Drop 2 sound
Distribution network process, equipment, lens
scanning QR code APP instant success, sound
equipment "drops" 2
Soft Music
In the process of distribution network, equipment
successfully connected ,routers equipment will
play some soft music
Indicator State Device state
Device reset (wait for distribution network state,)
long press equipment "reset button" 5 seconds
Device is in wake-up sate and has been
successfully connected routers and servers
and router disconnected or router network)
No lighting Device was sleeping or blackout or user active
closed working indicator light
status)
APP appear QR Code distribution network guide interface, aim the QR
click on the "I Heard a Prompt" , enter the next step;
Equipment began to connect to the server, please wait until the complete
765 8 9 10