TV One 1T-DA-672 User manual

1T-DA-672
HDMI V1.4 Distribution Amplifier
Instruction Manual
99 Washington Street
Melrose, MA 02176
Phone [phone]
Toll Free 1-800-517-8431
Visit us at www.TestEquipmentDepot.com

Table of Contents
1.0
Introduction
2
2.0
Specifications
4
3.0
Checking Package Contents
5
4.0
Connecting the Hardware
5
5.0
Operating The Unit
6
6.0
Troubleshooting
7
7.0
Limited Warranty
8
8.0
Regulatory Compliance
9
9.0
Contact Information
9

2
1.0 INTRODUCTION
The tvONE 1T-DA-672 HDMI Distribution Amplifier provides dual, independent outputs
from a single HDMI input for distribution to devices capable of receiving and/or displaying
such signals. The product is compatible with HDMI v1.4 specifications; a cutting-edge
technology that supports Deep Color (10-bit and12-bit) video. In addition, all devices exhibit
high bandwidth (up to 300MHz - 9Gbps) and provide signal amplification and equalization
for high performance processing of audio and video allowing the signals to travel great
distances without quality loss. As a bonus feature, all HDMI outputs can also be cascaded.
1.1 Liability Statement
Every effort has been made to ensure that this product is free of errors. tvONE cannot be
held liable for the use of this hardware or any direct or indirect consequential damages
arising from its use. It is the responsibility of the user of the hardware to check that it is
suitable for his/her requirements and that it is installed correctly. All rights reserved. No
parts of this manual may be reproduced or transmitted by any form or means electronic or
mechanical, including photocopying, recording or by any information storage or retrieval
system without the written consent of the publisher.
tvONE reserves the right to revise any of its hardware and software following its policy to
modify and/or improve its products where necessary or desirable. This statement does not
affect the legal rights of the user in any way.
All third party trademarks and copyrights are recognised. The tvONE logo, Magenta logo,
CORIO word and the CORIO logo are registered trademarks of tvONE. All other
trademarks are the property of their respective holders.

3
1.2 Features
The 1T-DA-672 HDMI Distribution Amplifier has many features that enable it to perform in a
superior manner. Among these features you will find:
HDMI v1.4, HDCP 1.1 and DVI 1.0 compliant
Allows distribution of 2 outputs
Supports 3D video resolutions (Frame Packing, Side by Side)
Supports 10/12-bit color depth display
Supports PC resolutions to 4kx2k
Supports HDTV resolutions to 1080p
Supports SDTV resolutions of 480i and 576i
Supports DVI when using optional HDMI to DVI Adaptors
Signal Equalization feature enables longer cable runs
Supports automatic discovery of monitor EDID
1.3 Getting the Best Results
There are many factors affecting the quality of results when distributing HDMI type signals.
Some basic precautions will ensure the best possible performance from your new HDMI
DA.
Output display device –The quality of the output signal will depend largely upon the
type and quality of the HDMI display device used. For instance, some video
projectors just look better than others.
Distance between the DA sources and the display –This plays a major role in the
final result. Long distances are possible, but special measures should be taken in
order to avoid signal loss. These include using high quality cables. Line amplifiers or
the use of signal extension products may also be necessary for the longest runs.
Input/Output connection cables –Low quality cables are susceptible to interference.
They degrade signal quality due to poor matching and can cause elevated noise
levels. Cables should be of the best quality.
Interference from nearby electrical devices –These can have an adverse effect on
signal quality. For example, an older computer monitor often emits very high
electromagnetic fields that can interfere with the performance of video equipment in its
proximity.

4
2.0 SPECIFICATIONS:
Video Inputs
HDMI
1x via HDMI connector
Video Output
HDMI
2x via HDMI connector
General
Video Bandwidth
Color Depth
Maximum PC/DVI Resolutions
Supported HDTV Formats
Compliance
Signal Equalization
300MHz/9Gbps
10/12-bit color depth display
4kx2k (3840x2160@24/25/30Hz, 4096x2160@24Hz)
480i, 480p, 576i, 576p, 720p, 1080i and 1080p
HDMI V1.4, HDCP V1.1, DVI V1.0
Internal
Maximum Distances
Source to DA
DA to Display
20m (60’) for 1080p/8-bit, 15m (45’) for 1080p/12-bit
15m (45’) for 1080p/8-bit, 10m (30’) for 1080p/12-bit
Warranty
Limited Warranty
3 Years Parts and Labor
Mechanical
1T-DA-672 (H-W-D)
1T-DA-672 Weight
25 x 102 x 145mm (1.0” x 4” x 5.7”)
0.298g (0.66 lbs.)
Environmental
Operating Temperature
Operating Humidity
0to +40C (+32to +104F)
20% to 90%, Non-condensing
Storage Temperature
Storage Humidity
0to +60C (+32to +140F)
20% to 90%, Non-condensing
Power Requirement
External Power Supply
5VDC@2.6A
Regulatory Approvals
HDMI DA
FCC, CE, RoHS
Power Supply
UL, CUL, CE, PSE, GS, RoHS
Accessories Included
1x AC Power Adapter
US, UK or Euro
1x Instruction Manual