TV One 1T-DA8CVB User manual

Instruction Manual
1T-DA8CVB and 1T-DA8CVR
Composite Video Distribution Amplifiers
Composite Video Distribution Amplifier

Table of Contents
1.0 Introduction 2
2.0 Specifications 3
3.0 Package Contents 3
4.0 Connecting the Hardware 4
5.0 Operating The Unit 5
6.0 Troubleshooting 5
7.0 Limited Warranty 5
8.0 Regulatory Compliance 6
9.0 Contact Information 7

2
1.0 INTRODUCTION
Thanks for purchasing this Distribution Amplifier from TV One. These Distribution
Amplifiers are designed to provide a quickly implemented solution for distributing
Composite BNC, RCA and mini-din YC (S-Video) signals to multiple devices. TV
One offers a full line of high quality Seamless Switchers, Video Scalers,
Up/Down/Cross Converters, Analog-Digital Converters (SD/HD-SDI, HDMI, DVI),
Format Converters, Standards Converters, TBC/Frame Synchronizers, Matrix
Routing Switchers, Signal Distribution Amplifiers and Cat.5 Transmission
Systems.
1.1 Liability Statement
Every effort has been made to ensure that this product is free of errors. TV One
cannot be held liable for the use of this hardware or any direct or indirect
consequential damages arising from its use. It is the responsibility of the user of
the hardware to check that it is suitable for his/her requirements and that it is
installed correctly. All rights reserved. No parts of this manual may be
reproduced or transmitted by any form or means electronic or mechanical,
including photocopying, recording or by any information storage or retrieval
system without the written consent of the publisher.
TV One reserves the right to revise any of its hardware and software following its
policy to modify and/or improve its products where necessary or desirable. This
statement does not affect the legal rights of the user in any way.
All third party trademarks and copyrights are recognized. TV One, TV One-task
and CORIO logosare the registered Trademarks of TV One. All other trademarks
are the property of their respective holders.
1.2 Features
These Distribution Amplifiers have many features that enable them to perform in
a superior manner. Among those features you will find:
Ultra Compact Form Factor
High Performance Signal Distribution
Plug and Play––No boot-up required
Multiple Models to support standard video connectors
Locking Power Connector
100 Mhz Bandwidth

3
2.0 SPECIFICATIONS
Distribution Amplifiers
1T-DA8CVB 1x8 Composite Video on BNC
1T-DA8CVR 1x8 Composite Video on RCA
1T-DA8SV 1x8 YC (s-Video) on 4-Pin Mini-DIN
Performance
Bandwidth 250MHz,+/-3db
Impedance 75
Distortion <0.5db
Differential Gain <0.1%
Differential Phase <0.1
Isolation >65db
Signal/Noise Ratio >65db
Signal Gain Unity
Television Standards PAL-NTSC
Mechanical
Size (H-W-D) 25x175x100mm (1"x7"x4")
1T-DA8CVB Weight (Net) 510 g (1.13 lbs)
1T-DA8CVR Weight (Net) 400 g (0.88 lbs)
1T-DA8SV Weight (Net) 400 g (0.88 lbs)
Warranty
Limited Warranty 3 Years Parts and Labor
Environmental
Operating Temperature 0° to +70°C (+32° to 158° C)
Operating Humidity 10% to 90%, Non-condensing
Storage Temperature -25° C to +95 ° C (-13° to +203° F)
Storage Humidity 10% to 90%, Non-condensing
Power Requirement
External Power Supply 12VDC@500mA - Locking DC
Regulatory Approvals
Amplifier Units FCC, CE, RoHS
Power Supplies UL, CUL, CE, PSE, GS, RoHS
Accessories Included
1x Power Adapter US, UK or Euro
1x Operations Manual
3.0 CHECKING PACKAGE CONTENTS
Before attempting to use this unit, please check the packaging and make certain
the following items are contained in the shipping carton:
1x Distribution Amplifier
1x Power Adaptor
1x Operation Manual