TV One ONErack 1RK-5RU-KIT User manual

®
We En
g
ineer Confidence
®
®
We En
g
ineer Confidence
®
MNL-1RK-CHASSIS-V1.30
Mar 2019
1RK-CHASSIS ONErack chassis
Installation Guide V1.30

In this guide
In the box 1
Building a kit chassis 2
Building the chassis 3
Contact us 6

MNL-1RK-CHASSIS-V1.30 1
In the box
2 side panels (identical)
6 mounting rails
4Boltstrips
24 M4 screws
1 M6 rack mounting kit
4
4
4
In the unlikely event that a component is missing or damaged, please
contact [e-mail] or [e-mail].
Tools
Pozidriv®PZ2 crosshead screwdriver

2tvONE
Building a kit chassis
If you purchased your chassis as part of the
ONErack kit, you can use the kit box to help
you align and steady the mounting rails as you
attach the first side panel. The kit box contains
holes for 4RU, 5RU, and 6RU chassis. Make
sure you use the correct holes for your chassis.
Nowgotostep3of Building the chassis on page 5.

MNL-1RK-CHASSIS-V1.30 3
Building the chassis
1. Position the three lower rails with:
A. The numbers facing upwards
B. The space for the bolt strip facing outwards
Use M4 screws to connect the rails to the side panel.

4tvONE
2. Position the three upper rails with:
A. The numbers facing downwards
B. The space for the bolt strip facing outwards
Use M4 screws to connect the rails to the side panel.

MNL-1RK-CHASSIS-V1.30 5
3. Slide an M3 bolt strip into each of the four mounting rails shown
here.
4. Use the remaining 12 M4 screws to connect the other side panel
to the mounting rails.

6tvONE
Contact us
tvone.com
[e-mail]
Support NCSA: [e-mail]
Support EMEA: [e-mail]
Support Asia: [e-mail]
Information in this document is subject to change without notice. No part of this
publication may be reproduced, stored in a retrievalsystem, or transmitted in any form
or any means electronic or mechanical, including photocopying and recording for any
purpose other than the purchaser's personaluse without the written permissionof
tvONE.
Copyright © 2019 tvONE™. All rights reserved.
Registered in the U.S. Patent and Trademark Office.