TV One ONErack MNL-1RK-CHASSIS v1.10 User manual

Chassis
MNL-1RK-CHASSIS v1.10
ONErack
patent pending
Installation Guide

1 ONErack
Tools
Pozidriv® PZ2 crosshead screwdriver
In the box
2
Side panels
(identical)
6
Mounting
rails
3
M3 bolt
strips
24
M4 screws
1
M6 rack
mounting kit
4 x 4 x 4 x
In the unlikely event that a component is missing or damaged, please contact
[email protected]m or [email protected]

tvONE 2
Building the chassis
To avoid damaging your ONErack, build it in a clean, tidy area.
1. Use two M4 screws to
connect each mounting
rail to one side panel.
Make sure each mounting
rail is aligned as shown.
2. Slide an M3 bolt strip into
each of three mounting
rails, as shown.
*
*
*
*
*
*

3 ONErack
3. Use the remaining 12 M4
screws to connect the
other side panel to the
mounting rails.
Contact us
www.tvone.com
[email protected]m
tvONE NCSA
North, Central and South
America
tvONE EMEA
Europe, Middle East, Africa and
Asia Pacific
2791 Circleport Drive,
Erlanger, KY 41018, USA
Continental Approach,
Westwood Industrial Estate,
Margate, Kent, CT9 4JG, UK
Tel [phone]
Fax [phone]
Tel [phone]
Fax [phone]
Sales: [e-mail]
Support: [email protected]om
Sales: [e-mail]
Support: [email protected]
Information in this document is subject to change without notice. No part of this publication may be
reproduced, stored in a retrieval system, or transmitted in any form or any means electronic or
mechanical, including photocopying and recording for any purpose other than the purchaser's personal use
without the written permission of tvONE.
Copyright 2016 tvONE. All rights reserved.