4
Pairing to link
1. Setup Bluetooth link between transmitter and speaker
•Power on both transmitter and speaker
•The blue LED blinks at low speed (1Hz).
•For the first time use, stay pushing the pairing button of transmitter
and wait the LED1 of transmitter to blink at medium speed(2Hz).
•Then, devices are entered pairing status and setup link automatically.
•As the link is established, the LED1 on both devices are blinking at full
speed(4Hz).
•Plugging transmitter into the phone jack of any audio player and
enjoying the music from speaker
Note : F“Pairing to Link”is a general operation to create and exchange a
link key between two devices. The devices use the link key for
future authentication as exchanging information and,thus,setup a
linkbetween them.
FThe link will be always existed between these devices once you
set them up. You do not need to repeat the setup procedure in the
next time.
2. Setup Bluetooth link between speaker and computer (notebook, PDA, or
Mobile phone). The computer requires Bluetooth-enabled device and A2DP
technologies.
•Activate the Bluetooth application program in your computer.
•Search for the speaker device.
•Click link icon in the Bluetooth application program to link with
the speaker.
•If pairing code is required, key in “0000”.
•The link will be set and the LED1 of speaker will be blinking at full
speed(4Hz).
•Go to the device manager of the computer OS and redirect the
speaker device to the bluetooth speaker device. (For different
Bluetooth application program, there will be different bluetooth device
name.)
•Now, the music in your computer is played in the speaker.
Note : FFor Bluetooth application program in your computer,
please consult your computer manual for Bluetooth operations.
FPlease be aware the Bluetooth technology in your devices
should be version 1.2 and compatible with A2DP (Advanced Audio
Distribution Profile) to connect with speaker.
