TwinMOS Boom BTT001 User manual

All specification and information are subject to change without further notice.
iPod® is a trademark of Apple Computer, Inc.
TwinMOS Technologies Inc.
BooM2
Bluetooth 2.1ch Audio System for iPod®
User’s Manual
Table of Contents
1. Getting Started 1
2. Device Elements 2
3. System Installation 4
4. Pairing and linking Bluetooth 5
5. System Specification 6
1 Getting started
• Package includes
1. BooM System x 1
2. BooM Box x 1
3. IR Remote Control x 1
4. Bluetooth Audio Transmitter x 1
5. AC Adapter 100V ~ 240V, 50~60Hz x 1
6. 3.5 mm audio extension cable x 1
7. RCA video extension cable x 1
8. AC Adapter 100V ~ 240V, 50~60Hz x 1
9. Power cable x 1
10. Europe plug adapter x 1
11. User’s Manual x 1
12. Warranty Card x 1

All specification and information are subject to change without further notice.
iPod® is a trademark ofApple Computer, Inc.
VER 1.0 Page
1
2 Device Elements
2.1 BooM System (BTTA01)
2.2 BooM Box (IPTA02)
Top view
Front view Side view
Speaker
RCAcable
Bluetooth button
Volume upVolume down
iPod®socket
Shuffle socket
Video out
Power jack (DC 12V)
BooM Box
Line-in jack
Power button
BT LED

All specification and information are subject to change without further notice.
iPod® is a trademark ofApple Computer, Inc.
VER 1.0 Page
2
2.3 Remote Control
2.4 Bluetooth Audio Transmitter (BTT001)
Play /Pause
Next Track
Backward
Repeat
Random
On/Off
Mute
VOL UP
VOL Down
Woofer VOL UP
Woofer VOL Down
Bluetooth
Top view
Front view Side view
Pairing button
LED1(blue)
LED2(orange)
& LED3(green)
Power on/off switch
Battery charging

All specification and information are subject to change without further notice.
iPod® is a trademark ofApple Computer, Inc.
VER 1.0 Page
3
3 System Installation
Unpack the BooM2 system and check if
the package contains all the devices
and accessories.
Plug the RCA cable of BooM Box into the
“BooM Box” jack on the back of BooM
System. (White RCA plug to white RCA jack.)
Connect the power adaptor to the
“Power jack” of BooM System
Push the power button to turn on BooM
System.
Insert your iPod®s into the corresponding
socket. Do not plug iPod® Shuffle and other
iPod®devices at the same time.
Use IR remote control to operate
iPod® and BooM System*. Press
Bluetooth ( )button is to activate
the Bluetooth function in BooM
System.
Touch the buttons ”+” (Volume up)
or ”-“ (Volume down) to adjust volume.
Push both buttons at the same time to
mute the BooM System. Press
button is to activate the
Bluetooth function of BooM System.
Connect the video cable (yellow RCA cable)
to a TV Video-in to view photo or video on
TV.(for iPod®Photo and Video series only,
can’t apply to iPod® Naro.)
You can also connect a MP3 player to
the BooM System Via a audio
extension cable. Be aware that
other music player may perform
unstable audio power output to this
speaker system. Please use only
ordinary mp3 players.
Notice:
 If a 3.5mm audio cable is plugged, the iPod®interface will be disabled and no sound is output to
BooM.
 Remote control features apply to most models of iPod®except Shuffle.
 Hitting by abnormal electric shock from external power source, the sound of BooM will be
diminished or mute. Please restart the BooM System upon such situation.

All specification and information are subject to change without further notice.
iPod® is a trademark ofApple Computer, Inc.
VER 1.0 Page
4
4 Pairing and Linking Bluetooth
4.1 Setup Bluetooth link between transmitter and BooM2
4.1.1 Power on BTT001 and activate BTTA01 Bluetooth function via
remote control or press button on BooM System.
4.1.2 The LED1 of transmitter and BT LED of BooM System will blink
at low frequency. (1 Hz.)
4.1.3 For the 1st time usage, keep pressing the pairing button of
BTT001 and wait the LED1 of BTT001 to blink at medium
frequency.(2 Hz.) Both devices enter the pairing state and will
start to setup link automatically.
4.1.4 After the link is established, the LED1 of BTT001 and BT LED of
BooM2 start to blink at full speed. (4Hz.)
4.1.5 Plug BTT001 into the earphone jack of a MP3 player and enjoy
the music from the BTTA01.
Notice :
Bluetooth pairing is required only for the first time operation of both devices. After successful
pairing, both devices will recognize and link each other automatically next time.
4.2 Setup Bluetooth link between BooM2 and A2DP-enabled
Computers (PC, Notebook, PDA, or Mobile phone)
4.2.1 Activate the Bluetooth application program/function of your
computers.
4.2.2 Search for BT device “TwinMOS Speaker”.
4.2.3 Click link icon of the Bluetooth application program to pair the
BTTA01.(BooM2 System)
4.2.4 If pairing code is required, please enter “0000”.
4.2.5 The link will be set and the LED1 of BTTA01 will start to blink at
full speed.(4Hz.)
4.2.6 Go to the device manager of the OS and redirect the speaker
device to the Bluetooth speaker device. (For different Bluetooth
application program, the device name will be different.)
4.2.7 Now, the sound of computer is aired to BooM System via
Bluetooth connection.
Notice:
Regarding the operation of the Bluetooth application program in your computer, please
consult your computer manual.
Your computer, notebook, PDA and Mobile Phone must be Bluetooth 1.2 compliant and
A2DP-enabled (Advanced Audio Distribution Profile) to transfer stereo audio stream to BooM
System.

All specification and information are subject to change without further notice.
iPod® is a trademark ofApple Computer, Inc.
VER 1.0 Page
5
5 Specifications
5.1 BTTA01+IPTA02, BooM2 BT 2.1ch Audio System
Configuration BTTA01(BooM System)+IPTA01(BooM Box)
Model
Voltage input 100V~240V,0.8A,50~60Hz
Speaker output BooM System – 8 watts per Channel
BooM Box – 25 watts
Frequency Response 50Hz – 20KHz @ -3dB
THD% 0.1%
Signal to Noise Ratio >80dB
Size BooM System – 402 x80 x 57 mm
BooM Box – 229 mm(diameter),232mm(high)
Weight BooM System – 650g
BooM Box – 2kg
Docking iPod®G3/G4/G5,iPod®mini//nano/ *shuffle
Bluetooth Receiver Build-in
RF BT V1.2, Class II, 2.4GHz
Max. RF distance 50 feet/15 meter (open space)
Bluetooth Profile A2DP (AdvancedAudio Distribution Profile)
Codec method: Sub Band Codec(SBC)
Antenna type PIFA
Security Pairing, Encryption, and Authentication
RF Power RF output power 0 ~ 2 dBm
Frequency band 2402 – 2480 MHz
Modulation FHSS(Frequency-Hopping Spread Spectrum)
Data rate 1 Mbps
Sensitivity < 10-3BER@-80dBm
*Remote control features apply to most models of iPod®except Shuffle.

All specification and information are subject to change without further notice.
iPod® is a trademark ofApple Computer, Inc.
VER 1.0 Page
6
5.2 BTT001, Bluetooth Audio Transmitter
BTT001
General Factors
RF BT V1.2 Class II, 2.4GHz
Max. RF Distance 15 Meters in open space
BT Profile A2DP (Advanced Audio Distribution Profile)
Data Rate 1 Mbps
Battery 1. Rechargeable Li+ Polymer Battery
2. Battery Life : 3 hours
Audio Interface Std. 3.5mm analog Line-In for L/R Stereo
User Interface
LED1(Blue)
Indicator for Power On, BT Pairing & Linking
Power on→Blinking at 1 Hz
Pairing →Blinking at 2 Hz
Linking →Blinking at 4 Hz
LED2(Orange) Shinning for low Battery
LED3(Green) Indicator for Battery Charging :
On →Charging is progressing.
Off →Battery is full.
Pairing Button Keep pressing to link with new BT device.
Power On Switch Switch to turn on device.
Battery Charging Jack 3.0mm in diameter
FCC Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.

All specification and information are subject to change without further notice.
iPod® is a trademark ofApple Computer, Inc.
VER 1.0 Page
7
TwinMOS BooM Series 1-year Limitd Warranty
This is important document. Attach your bill of sale to this card and keep it in a safe place. Your
bill of sale is your warranty. The TwinMOS BooM series warranty remains ONE YEAR the day
of the first consumer purchase.
Who is protected by this warranty?
The TwinMOS BooM Series warranty protects the original owner and all subsequent owners if
the product is purchased via an authorized dealer.
What is covered by this warranty?
Except as specified below, The TwinMOS BooM Series warranty covers all defects in material
and workmanship. The following are not covered: Damage caused by accident, misuse, abuse,
product modification, or neglect; damage occurring during shipment; damage from failure to
follow the setup instructions in the user’s manual; damage resulting the performance of repairs
by someone not authorized by TwinMOS; any claims based on misrepresentation by the seller.
TwinMOS’s liability is limited to the repair and replacement, at our option, of any defective
product and shall not incidental and consequential damages. TwinMOS reserves the right to
replace a discontinued model with a comparable model.Any replacement, accessories or
parts may be new or rebuilt.
To obtain warranty service
If you need warranty service for TwinMOS BooM series products, please contact and ask for
RMA numbers at our worldwide sales offices in the regions listed below.
TwinMOS Technologies Inc.
(Taipei, Taiwan)
19F,No.90,Hsin-Tai Wu Rd., Sec,1,
Hsichih, Taipei Hsien, Taiwan, R.O.C.
221(Hsichih Eastern Science Park
Building C)
TEL:[phone]
TwinMOS Technologies
(Shanghai) Co.,Ltd.
Building 1, No.115, Lane 572, BiBo Rd.,.
ZhangJiang Hi-Tech Park, ShangHai
Zip:201203
Tel:[phone]
TwinMOS Technologies Inc.
(India)Pvt,Ltd.
412, ShakuntalaAppartments, 59, Nehru
Place, New Delhi-110019
Tel:[phone]
TwinMOS Technologies Japan Inc.
5F,Nisshon Nihonbashi Bldg.,
10-18,Nihonbashi Tomizawa-cho
Chuo-ku, Tokoy 103-0006 Japan
Tel:[phone]
TwinMOS Technologies Korea Inc.
No.1130 Hyundai World Tower 907,
Mok5-dong,,
Seoul, Korea
Tel:[phone]
TwinMOS Technologies (S) Pte Inc.
175A Bencoolen Street
No.05-09/10/11,Burlington Square
Singapore 189650
Tel:[phone]
TwinMOS Technologies Middle East LLC
The Attrium Centre, 7th floor, # 709,
P.O.Box: 49740, Bur Dubai UAE
Tel:[phone]
TwinMOS Technologies Europe B.V.
Gyroscoopweg. 134-136
1042 AZ Amsterdam
Tel:[phone]
TwinMOS Technologies USA Inc.
48521 Warm Springs Boulevard, Suite
317, Fremont, CA 94539 U.S.A.
Tel:[phone]