TXper nVS-1P User manual

Quick Installation Guide
1CH/4CH Network Video Server
www.telexper.com

1
1
1CH/4CH Network Video Server
Product Front View: nVS-1P nVS-4P
Product Rear View: nVS-1P nVS-4P

2
2
Notice:
* For nVS-1P & nVS-4P, the power is provided via PoE by
Gigabit PoE HUB. Thus, it is not necessary to connect
the DC12V In (pin-3) and GND (pin-4).
* Please use the CAT-6 RJ-45 cable to connect each
Telexper device.
* Please use the 75Ωcoaxial video cable connecting the
camera to the video server.
* The DC12V Output at pin-5 provides the max 8W
electric power.
* The effective distance away from the PoE Hub is 100
meters.
The states of the Power LED
* Red Color: Power on when connected to the Gigabit
PoE HUB
* Red Flashiness: When the LAN is active

3
3
Quick Installation
Step 1: nVS-1P nVS-4P
Step2 Step3
Step4
Step5

4
4
Bracket Support:
nVS-1P nVS-4P
IP CCTV Installation Diagram
Connect
Cameras by
using the 75
Ω
ΩΩ
Ωcoaxial
video cable to
nVS
Connect the
nVS by using
the CAT-6
RJ-45 cable to
PoE Hub
U
plink to
network
nVS
-
1P
nVS
-
4P
Power Cord