TYAN FT83A-B7129 Quick start guide

FT83A-B7129
Service Engineer’s Manual

2
http://www.tyan.com
PREFACE
Copyright
This publication, including all photographs, illustrations, and software, is protected
under international copyright laws, with all rights reserved. Neither this manual, nor
any material contained herein, may be reproduced without written consent of
manufacturer.
Copyright 2021 MITAC COMPUTING TECHNOLOGY CORPORATION. All rights
reserved. TYAN®is a registered trademark of MITAC COMPUTING
TECHNOLOGY CORPORATION.
Version 1.0c
Disclaimer
Information contained in this document is furnished by MiTAC Computer
Corporation and has been reviewed for accuracy and reliability prior to printing.
TYAN®assumes no liability whatsoever, and disclaims any express or implied
warranty, relating to sale and/or use of TYAN®products including liability or
warranties relating to fitness for a particular purpose or merchantability. TYAN®
retains the right to make changes to produce descriptions and/or specifications at
any time, without notice. In no event will TYAN®be held liable for any direct or
indirect, incidental or consequential damage, loss of use, loss of data or other
malady resulting from errors or inaccuracies of information contained in this
document.
Trademark Recognition
All registered and unregistered trademarks and company names contained in this
manual are property of their respective owners including, but not limited to the
following.
TYAN®is a trademark of MITAC COMPUTING TECHNOLOGY CORPORATION.
Intel®is a trademark of Intel®Corporation.
AMI®, AMIBIOS® and combinations thereof are trademarks of AMI Technologies.
Microsoft®, Windows®are trademarks of Microsoft Corporation.
IBM®, PC®, AT®and PS/2®are trademarks of IBM Corporation.
Winbond®is a trademark of Winbond Electronics Corporation.

3
http://www.tyan.com
FCC Declaration
Notice for the USA
Compliance Information Statement (Declaration of Conformity Procedure) DoC FCC
Part 15: This device complies with part 15 of the FCC Rules.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following conditions:
‧This device may not cause harmful interference.
‧This device must accept any interference received, including interference that may
cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his
own expense.
Notice for Canada
This Class A digital apparatus complies with Canadian ICES-003. Cet appareil
numérique de la Classe A est conforme àla norme NMB-003 du Canada.
●Notice for Europe (CE Mark)
This product is in conformity with the Council Directive 2014/30/EU and 2014/35/EU.

4
http://www.tyan.com
Warning
This equipment is compliant with Class A of CISPR 32. In a residential environment
this equipment may cause radio interference.
This equipment is not suitable for use in locations where children are likely to be
present.
CAUTION
Lithium battery included with this board. Do not puncture, mutilate, or dispose of
battery in fire. There will be danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type recommended by manufacturer.
Dispose of used battery according to manufacturer instructions and in accordance
with your local regulations.
The elements of the instructional safeguard shall be as follows:
-element 1a: IEC 60417-6056 (2011-05) for moving fan blades or
IEC 60417-6057 (2011-05) for other moving parts
-element 2:”Moving parts”or “Moving fan blade”as applicable, or equivalent text
-element 3: optional
-element 4: Keep body parts away from moving parts”or “Keep body parts away
from fan blades”or “Keep body parts out of the motion path”as applicable, or
equivalent text
●VCCI-A
この装置は、クラスＡ情報技術装置です。この装置を家庭環境で使用すると電波妨
害を引き起こすことがあります。この場合には使用者が適切な対策を講ずるよう要
求されることがあります。 VCCI-A
●Safety: IEC/EN 62368-1
This equipment is compliant with CB/LVD of Safety: IEC/EN 62368-1:2014.
Warning
Keep new and used batteries away from children.
If the battery compartment does not close securely, stop using the product and
keep it away from children.

5
http://www.tyan.com
If you think batteries might have been swallowed or placed inside any part of the
body, seek immediate medical attention.
About this Manual
This Manual is intended for trained service technician/personnel with hardware
knowledge of personal computers. It is aimed to provide you with instructions on
installing your TYAN FT83A-B7129.
How this guide is organized
This guide contains the following parts:
Chapter 1: Overview
This chapter give an introduction to the FT83A-B7129 barebones, standard
parts list, and accessories. describes the external components, gives a table of
key
Chapter2: Setting Up
This chapter Covers procedures on installing the CPU, memory modules, add
on card and hard drives. Give an overview about the FT83A-B7129 barebone
from an overall angle.
Chapter 3: Replacing the Pre-installed Components
This chapter covers the removal and replacement procedures for pre-installed
components.
Chapter 4: Motherboard Information
This chapter lists the hardware setup procedures that you need to abide by when
installing system components. It includes description of the jumpers and connectors
on the motherboard.
Chapter5: BIOS Setup
This chapter tells how to change system settings through the BIOS setup menu.
Detailed descriptions of the BIOS parameters are also provided.
Chapter 6: Diagnostics
This chapter introduces some BIOS codes and technical terms to provide better
service for the customers.
Appendix:
This Chapter Describes the Fan and Temp sensors location; list the cable
connection and FRU part tables for reference of system setup and technical
support in case a problem arises with your system.

6
http://www.tyan.com
Safety and Compliance Information
Before installing and using TYAN FT83A-B7129, take note of the following
precautions:
·Read all instructions carefully.
·Do not place the unit on an unstable surface, cart, or stand.
·Do not block the slots and opening on the unit, which are provided for
ventilation.
·Only use the power source indicated on the marking label. If you are not
sure, contact the power company.
·The unit uses a three-wire ground cable, which is equipped with a third
pin to ground the unit and prevent electric shock. Do not defeat the
purpose of this pin. If your outlet does not support this kind of plug, contact
your electrician to replace your obsolete outlet.
·Do not place anything on the power cord. Place the power cord where it
will not be in the way of foot traffic.
·Follow all warnings and cautions in this manual and on the unit case.
·Do not push objects in the ventilation slots as they may touch high
voltage components and result in shock and damage to the components.
·When replacing parts, ensure that you use parts specified by the
manufacturer.
·When service or repairs have been done, perform routine safety checks
to verify that the system is operating correctly.
·Avoid using the system near water, in direct sunlight, or near a heating
device.
·Cover the unit when not in use.

7
http://www.tyan.com
Safety Information
Retain and follow all product safety and operating instructions provided
with your equipment. In the event of a conflict between the instructions in
this guide and the instructions in equipment documentation, follow the
guidelines in the equipment documentation.
Observe all warnings on the product and in the operating instructions. To
reduce the risk of bodily injury, electric shock, fire and damage to the
equipment, observe all precautions included in this guide.
You must become familiar with the safety information in this guide before
you install, operate, or service TYAN products.
Symbols on Equipment
Caution. This symbol indicates a potential hazard.
The potential for injury exists if cautions are not
observed. Consult equipment documentation for
specific details.
Caution. Slide-mounted equipment is not to be
used as a shelf or a work space.
Warning. This symbol indicates the presence of
hazardous energy circuits or electric shock
hazards. Refer all servicing to qualified personnel.
Warning. This symbol indicates the presence of a
hot surface or hot component. If this surface is
contacted, the potential for injury exists.
To reduce risk of injury from a hot component,
allow the surface to cool before touching.
CAUTION: Risk of Explosion if Battery is replaced
by an Incorrect Type. Dispose of Used Batteries
According to the Instructions.
ATTENTION: Risque d’explosion si la batterie est
remplacée par un type incorrect. Mettre au rebus
les batteries usagées selon les instructions.
Multiple power connections. Prior to servicing,
disconnect all power cords.
Raccordements de puissance multiples. Avant
l’entretien, vous devez débranchez tous les
cordons d’alimentation.

8
http://www.tyan.com
General Precautions
·Follow all caution and warning instructions marked on the equipment and
explained in the accompanying equipment documentation.

Machine Room Environment
 ·Make sure that the area in which you install the system is properly
ventilated and climate-controlled.
·Ensure that the voltage and frequency of your power source match the
voltage and frequency inscribed on the electrical rating label of the
equipment.
·Do not install the system in or near a plenum, air duct, radiator, or heat
register.
·Never use the product in a wet location.
Equipment Chassis
·Do not block or cover the openings to the system.
·Never push objects of any kind through openings in the equipment.
Dangerous voltages might be present.
·Conductive foreign objects can produce a short circuit and cause fire,
electric shock, or damage to your equipment.
·Lift equipment using both hands and with your knees bent.
Equipment Racks
To avoid injury or damage to the equipment:
·Observe local occupational health and safety requirements and guidelines
for manual materials handling.
·Do not attempt to move a rack by yourself; a minimum of two people are
needed to move a rack.
·Do not attempt to move a fully loaded rack. Remove equipment from the
rack before moving it.
·Do not attempt to move a rack on an incline that is greater than 10 degrees
from the horizontal.

9
http://www.tyan.com
·Make sure the rack is properly secured to the floor or ceiling.
·Make sure the stabilizing feet are attached to the rack if it is a single-rack
installation.
·Make sure racks are coupled together if it is a multiple-rack installation.
·Make sure the rack is level and stable before installing an appliance in the
rack.
·Make sure the leveling jacks are extended to the floor.
·Make sure the full weight of the rack rests on the leveling jacks.
·Always load the rack from the bottom up. Load the heaviest component in
the rack first.
·Make sure the rack is level and stable before pulling a component out of the
rack.
·Make sure only one component is extended at a time. A rack might become
unstable if more than one component is extended.
To avoid damage to the equipment:
·The rack width and depth must allow for proper serviceability and cable
management.
·Ensure that there is adequate airflow in the rack. Improper installation or
restricted airflow can damage the equipment.
·The rack cannot have solid or restricted airflow doors. You must use a
mesh door on the front and back of the rack or remove the doors to ensure
adequate air flow to the system.
·If you install the Model in a rack, do not place equipment on top of the unit.
It will cause restricted airflow and might cause damage to the equipment.
·Make sure the product is properly matted with the rails. Products that are
improperly matted with the rails might be unstable.
·Verify that the AC power supply branch circuit that provides power to the
rack is not overloaded. This will reduce the risk of personal injury, fire, or
damage to the equipment. The total rack load should not exceed 80 percent
of the branch circuit rating. Consult the electrical authority having jurisdiction
over your facility wiring and installation requirements.

10
http://www.tyan.com
Equipment Power Cords
·Use only the power cords and power supply units provided with your
system. The system might have one or more power cords.
·Plug the power cord into a grounded (earthed) electrical outlet that is easily
accessible at all times.
·In all European electrical environments, you must ground the Green/Yellow
tab on the power cord. If you do not ground the Green/Yellow tab, it can
cause an electrical shock due to high leakage currents.
·Do not place objects on AC power cords or cables. Arrange them so that no
one might accidentally step on or trip over them.
·Do not pull on a cord or cable. When unplugging from the electrical outlet,
grasp the cord by the plug.
·To reduce the risk of electrical shock, disconnect all power cords before
servicing the appliance.
Equipment Batteries
·The system battery contains lithium manganese dioxide. If the battery pack
is not handled properly, there is risk of fire and burns.
·Do not disassemble, crush, puncture, short external contacts, or dispose of
the battery in fire or water.
·Do not expose the battery to temperatures higher than 60°C (140°F).
·The system battery is not replaceable. If the battery is replaced by an
incorrect type, there is danger of explosion. Replace the battery only with a
spare designated for your product.
·Do not attempt to recharge the battery.
·Dispose of used batteries according to the instructions of the manufacturer.
Do not dispose of batteries with the general household waste. To forward
them to recycling or proper disposal, use the public collection system or return
them to TYAN, your authorized TYAN partner, or their agents.
Equipment Modifications
·Do not make mechanical modifications to the system. TYAN is not
responsible for the regulatory compliance of TYAN equipment that has been
modified.

11
http://www.tyan.com
Equipment Repairs and Servicing
·The installation of internal options and routine maintenance and service of
this product should be performed by trained service technicians/personnel
who are knowledgeable about the procedures, precautions, and hazards
associated with equipment containing hazardous energy levels.
·Do not exceed the level of repair specified in the procedures in the product
documentation. Improper repairs can create a safety hazard.
·Allow the product to cool before removing covers and touching internal
components.
·Remove all watches, rings, or loose jewelry when working before removing
covers and touching internal components.
·Do not use conductive tools that could bridge live parts.
·Use gloves when you remove or replace system components; they can
become hot to the touch.
·If the product sustains damage requiring service, disconnect the product
from the AC electrical outlet and refer servicing to an authorized service
provider. Examples of damage requiring service include:
–The power cord, extension cord, or plug has been damaged.
–Liquid has been spilled on the product or an object has fallen into the
product.
–The product has been exposed to rain or water.
–The product has been dropped or damaged.
–The product does not operate normally when you follow the operating
instructions.
Instructional safeguard requirement
An instructional safeguard shall be provided to reduced the likelihood of
unintentional contact with a moving part in accordance with Clause F.5 except
that element 3 is optional.

12
http://www.tyan.com
Table of Contents
Chapter 1: Overview .....................................................................14
1.1 About the TYAN FT83A-B7129...........................................14
1.2 Product Models....................................................................14
1.3Features...............................................................................15
1.4Standard Parts List..............................................................21
1.4.1 Box Contents................................................................21
1.4.2 Accessories ..................................................................21
1.5About the Product................................................................22
1.5.1 System Front View .......................................................22
1.5.2 System Rear View........................................................24
1.5.3 LED Definitions.............................................................25
1.5.4 Internal View.................................................................26
1.5.5 Chassis Dimensions.....................................................27
Chapter 2: Setting Up ...................................................................28
2.0.1 Before you Begin..........................................................28
2.0.2 Work Area.....................................................................28
2.0.3 Tools.............................................................................28
2.0.4 Precautions...................................................................29
2.1 Installing Motherboard Components.....................................30
2.1.1 Removing the Chassis Cover.......................................30
2.1.2 Installing the CPU, Heat sink and Air Duct...................32
2.1.3 Installing the Memory ...................................................34
2.1.4 Installing the Expansion Card (PCIE Board) ................35
2.1.5 Installing Hard Drives ...................................................39
2.2 Rack Mounting.................................................................45
2.2.1 Installing the Server in a Rack......................................45
2.2.2 Removing the Server from Rack ..................................50
Chapter 3: Replacing Pre-Installed Components......................51
3.1 Introduction..........................................................................51
3.2 Disassembly Flowchart........................................................51
3.3 Removing the Cover............................................................52
3.4 Replacing the Power Supply ...............................................52
3.5 Replacing the Front Panel Board ........................................53
3.5.1 Front Panel Board Features.............................................54
3.6 Replacing the USB Board....................................................55
3.6.1 Front Panel Board Features.............................................56
3.7Replacing the System Fan ..................................................57
3.8Replacing the Fan Board.....................................................59
3.8.1 Fan Board Features..........................................................60
3.9Replacing the Riser Board...................................................61

13
http://www.tyan.com
3.9.1 Riser Board Features .......................................................62
3.10 Replacing the HDD Backplane Board ...............................63
3.10.1 HDD Backplane Board Features....................................65
3.10.2 Connector Definition.......................................................67
3.11 Replacing PCIE Board.......................................................68
3.11.1 PCIE Board Features .....................................................69
3.12 Replacing the Rear IO Board ............................................71
3.12.1 Rear IO Board Features.................................................72
3.13Replacing the Motherboard...............................................73
Chapter 4: Motherboard Information ..........................................76
4.1 Board Image........................................................................77
4.2 Block Diagram .....................................................................78
4.3 Motherboard Mechanical Drawing.......................................79
4.4 Board Parts, Jumpers and Connectors...............................80
4.5 Thermal Interface Material...................................................87
4.6 Tips on Installing Motherboard in Chassis ..........................88
4.7 Finishing Up.........................................................................94
Chapter 5: BIOS Setup..................................................................95
5.1 About the BIOS....................................................................95
5.2 Main Menu...........................................................................97
5.3 Advanced Menu...................................................................98
5.4 Server Management..........................................................187
5.5 Security..............................................................................190
5.6 Boot ...................................................................................195
5.7 Save & Exit........................................................................198
Chapter 6: Diagnostics...............................................................200
6.1 Flash Utility........................................................................200
6.2 AMIBIOS Post Code..........................................................201
6.3 Intel MRC Post Code.........................................................207
Appendix II: PCIE Slot Location and Corresponding List......213
Appendix III: Fan and Temp Sensors........................................214
Appendix IV: Cable Connection Tables....................................220
Appendix V: Installing OCP Card..............................................224
Appendix VI: FRU Parts Table...................................................226
Appendix VII: Glossary...............................................................229
Appendix VIII: Technical Support..............................................235

14
http://www.tyan.com
Chapter 1: Overview
1.1 About the TYAN FT83A-B7129
Congratulations on your purchase of the TYAN®FT83A-B7129, a highly optimized
rack-mountable 4U barebone system. FT83A-B7129 is designed to support dual
Intel®Xeon®Scalable Processor Families and up to 2,048GB RDIMM, 4,096GB
LRDIMM 3DS, providing a rich feature set and incredible performance. Leveraging
advanced technology from Intel®, FT83A-B7129 server system is capable of
offering scalable 32 and 64-bit computing, high-bandwidth memory design, and
lightning-fast PCIE bus implementation.FT83A-B7129 not only enpowers your
company in today’s demanding IT environment but also offers a smooth path for
future application usage.
TYAN® also offers the FT83A-B7129 in a version that can support up to twelve (12)
2.5”/3.5”hot-swap SAS/SATA HDDs and (2) hot-swap 2.5" SATA HDD, (8)
hot-swap 2.5" NVMe HDD. FT83A-B7129 uses rack-mountable 4U chassis
featuring a robust structure and a solid mechanical enclosure. All of this provides
FT83A-B7129 the power and flexibility to meet the needs of nearly any server
application.
1.2 Product Models
The system board within the Tyan Barebone is defined by the following models:
B7129F83AV8E4HR-N: Intel-based platform
B7129F83AV14E8HR-N: Intel-based platform

15
http://www.tyan.com
1.3Features
B7129F83AV8E4HR-N Specifications
System
Form Factor
4U Rackmount
Chassis Model
FT83
Chassis Dimension
(D x W x H)
32.68" x 17.26" x 6.9" (830 x 438.4 x
176mm)
Motherboard Name
S7129GMRE#
Motherboard
Notification
# The motherboard not sold
separately
Gross Weight
46 kg (101.4 lbs)
Net weight
39.3 kg (86.6 lbs)
Front Panel
Buttons
(1) RST, (1) PWR w/ LED, (1) UID
LEDs
(1) HDD, (2) LAN, (1) ID, (1) System
Event
I/O Ports
(1) VGA port, (2) USB 3.0 ports,
(1) COM Port
External Drive Bay
Q'ty / Type
(12) 3.5"/2.5" Hot-Swap SAS/SATA
HDDs
HDD Backplane
Support
SAS 12Gb/s, SATA 6Gb/s, NVMe
Supported HDD
Interface
(12) SATA 6Gb/s with (4) NVMe ports
System Cooling Configuration
FAN
(8) hot-swappable 8cm fans
Power Supply
Type
RPSU
Input Range
AC 100-127V/12A , AC
200-240V/9.48A
Frequency
50-60 Hz
Output Watts
4,800 Watts
Efficiency
80 plus Platinum
Redundancy
3+1
Processor
Q'ty / Socket Type
(2) LGA4189
Supported CPU Series
Intel Xeon Scalable Processor, 3nd
Gen Intel Xeon Scalable Processor
Thermal Design Power
(TDP) Wattage
Max up to 270W
System Bus
Up to 11.2/10.4 GT/s with Intel
UltraPath Interconnect (UPI) support
Chipset
PCH
Intel C621A
Switch IC
(2) PLX PEX88096

16
http://www.tyan.com
CPU-GPU Link Topology
Dual-root
All GPU connected to CPUs evenly
Memory
Supported DIMM Qty
(16)+(16) DIMM slots
DIMM Type / Speed
DDR4 ECC RDIMM/RDIMM
3DS/LRDIMM/LRDIMM 3DS 3200
Capacity
Up to 2,048GB RDIMM, 4,096GB
LRDIMM 3DS
Memory channel
8 Channels per CPU, 2 DIMM slots per
Channel
Memory voltage
1.2V
Expansion Slots
PCIE
(11) PCI-E Gen4 x16 slot
Pre-installed TYAN
Riser Card
(PCIE Gen4)
(2) M7129F83A-L16 riser card for
(2) PCI-E Gen4 x16 slot (left)
Pre-installed TYAN
RIO Card
F7129F83A-RIO
Others
(1) PCI-E Gen4 x16 OCP 3.0 slot
Physical Dimension
Abbreviation
FH/FL (Full-height, Full-length): 4.4" x
12.3" (111.2 x 312mm)
LAN
Q'ty / Port
(1) GbE port dedicated for IPMI
PHY
Realtek RTL8211FD
Storage
SATA
Connector
(3) SFF-8643 for (12)
SATA ports
Controller
Intel C621A
Speed
6Gb/s
RAID
RAID 0/1/10/5 (Intel RSTe)
NVMe
Connector (U.2)
(2) SFF-8654 for (4) NVMe
ports
Connector (M.2)
(1) 22110/2280 (by PCI-E
interface)
Graphic
Connector type
D-Sub 15-pin
Resolution
Up to 1920x1200
Chipset
Aspeed AST2600
I/O Ports
USB
(2) USB3.0 ports (@ rear),
(2) USB3.0 ports (@ front)
COM
(1) DB-9 COM port (@ front)
VGA
(1) D-Sub 15-pin port (@ front)
RJ-45
(1) dedicated GbE for IPMI
TPM (Optional)
TPM Support
Please refer to our TPM supported list.
System Monitoring
Chipset
Aspeed AST2600

17
http://www.tyan.com
Temperature
Monitors temperature for CPU &
memory & system environment
Voltage
Monitors voltage for CPU, memory,
chipset & power supply
LED
Over temperature warning indicator,
Fan & PSU fail LED indicator
Others
Watchdog timer support
Server Management
Onboard Chipset
Onboard Aspeed AST2600
BIOS
Brand / ROM size
AMI, 32MB
Feature
Hardware Monitor, SMBIOS
3.0/PnP/Wake on LAN, Boot from
USB device/PXE via LAN/Storage,
User Configurable FAN PWM Duty
Cycle, Console Redirection, ACPI
sleeping states S4,S5, ACPI 6.1
Operating System
OS supported list
Please refer to our AVL support lists.
Regulation
FCC (SDoC)
Class A
CE (DoC)
Class A
CB/LVD
Yes
RCM
Class A
VCCI
Class A
Operating Environment
Operating Temp.
10°C ~ 35°C (50°F~ 95°F)
Non-operating Temp.
- 40°C ~ 70°C (-40°F ~ 158°F)
In/Non-operating
Humidity
90%, non-condensing at 35°C
Note
Please refer to the TYAN NVIDIA
Compatibility List for the operating
temperature while GPGPU deployed
RoHS
RoHS 6/6 Compliant
Yes
Package Contains
Barebone
(1) FT83A-B7129 Barebone
Manual
(1) Quick Installation Guide

18
http://www.tyan.com
B7129F83AV14E8HR-N Specifications
System
Form Factor
4U Rackmount
Chassis Model
FT83
Chassis Dimension
(D x W x H)
32.68" x 17.26" x 6.9" (830 x 438.4 x
176mm)
Motherboard Name
S7129GMRE#
Motherboard
Notification
# The motherboard not sold
separately
Gross Weight
46 kg (101.4 lbs)
Net weight
39.3 kg (86.6 lbs)
Front Panel
Buttons
(1) RST, (1) PWR w/ LED, (1) UID
LEDs
(1) HDD, (2) LAN, (1) ID, (1) System
Event
I/O Ports
(1) VGA port, (2) USB 3.0 ports, (1)
COM Port
External Drive Bay (3.5")
Q'ty / Type
(12) 3.5"/2.5" Hot-Swap SAS/SATA
HDDs, (2) hot-swap 2.5" SATA HDD,
(8) hot-swap 2.5" NVMe HDD
HDD Backplane
Support
SAS 12Gb/s, SATA 6Gb/s
Supported HDD
Interface
(14) SATA 6Gb/s
External Drive Bay (2.5")
HDD Backplane
Support
SATA/NVMe
Q'ty / Type
(10) 2.5" Hot-Swap SAS/SATA HDDs
Supported HDD
Interface
(2) SATA/ (8) NVMe
System Cooling Configuration
FAN
(8) hot-swappable 8cm fans
Power Supply
Type
RPSU
Input Range
AC 100-127V/12A , AC
200-240V/9.48A
Frequency
50-60 Hz
Output Watts
4,800 Watts
Efficiency
80 plus Platinum
Redundancy
3+1
Processor
Q'ty / Socket Type
(2) LGA4189
Supported CPU Series
Intel Xeon Scalable Processor, 3nd
Gen Intel Xeon Scalable Processor
Thermal Design Power
(TDP) Wattage
Max up to 270W
System Bus
Up to 11.2/10.4 GT/s with Intel

19
http://www.tyan.com
UltraPath Interconnect (UPI) support
Chipset
PCH
Intel C621A
Switch IC
(2) PLX PEX88096
CPU-GPU Link Topology
Dual-root
All GPU connected to CPUs evenly
Memory
Supported DIMM Qty
(16)+(16) DIMM slots
DIMM Type / Speed
DDR4 ECC RDIMM/RDIMM
3DS/LRDIMM/LRDIMM 3DS 3200
Capacity
Up to 2,048GB RDIMM, 4,096GB
LRDIMM 3DS
Memory channel
8 Channels per CPU, 2 DIMM slots per
Channel
Memory voltage
1.2V
Expansion Slots
PCIE
(11) PCI-E Gen4 x16 slot
Pre-installed TYAN
Riser Card
(PCIE Gen4)
(2) M7129F83A-L16 riser card for
(2) PCI-E Gen4 x16 slot (left)
Pre-installed TYAN
RIO Card
F7129F83A-RIO
Others
(1) PCI-E Gen4 x16 OCP 3.0 slot
Physical Dimension
Abbreviation
FH/FL (Full-height, Full-length): 4.4" x
12.3" (111.2 x 312mm)
LAN
Q'ty / Port
(1) GbE dedicated for IPMI
PHY
Realtek RTL8211FD
Storage
SATA
Connector
(3) SFF-8643 for
(12) SATA ports
Controller
Intel C621A
Speed
6Gb/s
RAID
RAID 0/1/10/5 (Intel RSTe)
sSATA
RAID
RAID 0/1 (Intel RSTe)
NVMe
Connector (U.2)
(2) SFF-8654 for (4) NVMe
ports
Connector (M.2)
(1) 22110/2280 (by PCI-E
interface)
Graphic
Connector type
D-Sub 15-pin
Resolution
Up to 1920x1200
Chipset
Aspeed AST2600
I/O Ports
USB
(2) USB3.0 ports (@ rear),
(2) USB3.0 ports (@ front)
COM
(1) DB-9 COM port (@ front)

20
http://www.tyan.com
VGA
(1) D-Sub 15-pin port (@ front)
RJ-45
(1) dedicated GbE for IPMI
TPM (Optional)
TPM Support
Please refer to our TPM supported list.
System Monitoring
Chipset
Aspeed AST2600
Temperature
Monitors temperature for CPU &
memory & system environment
Voltage
Monitors voltage for CPU, memory,
chipset & power supply
LED
Over temperature warning indicator,
Fan & PSU fail LED indicator
Others
Watchdog timer support
Server Management
Onboard Chipset
Onboard Aspeed AST2600
BIOS
Brand / ROM size
AMI, 32MB
Feature
Hardware Monitor, SMBIOS
3.0/PnP/Wake on LAN, Boot from
USB device/PXE via LAN/Storage,
User Configurable FAN PWM Duty
Cycle, Console Redirection, ACPI
sleeping states S4,S5, ACPI 6.1
Operating System
OS supported list
Please refer to our AVL support lists.
Regulation
FCC (SDoC)
Class A
CE (DoC)
Class A
CB/LVD
Yes
RCM
Class A
VCCI
Class A
Operating Environment
Operating Temp.
10°C ~ 35°C (50°F~ 95°F)
Non-operating Temp.
- 40°C ~ 70°C (-40°F ~ 158°F)
In/Non-operating
Humidity
90%, non-condensing at 35°C
Note
Please refer to the TYAN NVIDIA
Compatibility List for the operating
temperature while GPGPU deployed
RoHS
RoHS 6/6 Compliant
Yes
Package Contains
Barebone
(1) FT83A-B7129 Barebone
Manual
(1) Quick Installation Guide
NOTE:
1. The specifications are subject to change without prior notice.
2. Please visit our website for the latest specifications.