TYVA PowerCase E2 User manual
PowerCase
Portable power station
Moduloo Ex range
Quick start guide
V1.0 - 20/09/2023
Package content
Included in delivery
Optional accessories
Obtain additional accessories for your PowerCase by contacting TYVA Energie:
Fast mains
charger
Portable power station
PowerCase
Quick start guide
220 VAC 300 W
mains charger
2/8
RCD module
Electrical specications
Mechanical specications
455 x 268 x
282 mm
Dimensions
Operating
- 10 to + 40 °C
Charge
0 to + 40 °C
Temperature
19.8 kg
Weight
IP54
Sealing
Li-ion NMC
Chemistry
Aluminium
Outer case
PowerCase E2
Available energy /kWh 2
Output power /VAC 220
Frequency /Hz 50
16 A output 1
Maximum continuous discharge power /kW 3
DC charger input /W 300 - 1000
Recommended charge time /hours 5
Handles 2
Power outlet E2
Input power /VAC 220
Maximum continuous charge power /kW 0.8
Maximum continuous charge current /A 15
3/8
Recharge
Outlet charge
1. Remove the protective cap from the recharge outlet.
2. Place the end of the charger in front of the PowerCase’s outlet, while ensuring that the two elements
correctly t together.
3. Plug the end of the charger in the PowerCase’s outlet with a slight tilt to the right. Keep rotating until you
hear a click indicating the end of the charger is locked on the outlet.
4. Follow up the state of charge thanks to the LED displays on the front panel of the PowerCase.
300 W
mains charger
User interface
PowerCase
2Type 2 power outlet
220 VAC / 16 A / 50 Hz / 3 kW max
1Safety vent
3DC charge outlet
58.8 V / 5 - 15 A
4ON / OFF button
5LED displays
Battery state of charge
1
2
3
4
5
4/8
Starting up
ON / OFF
button
Power up / down
1. Press the ON / OFF button once.
2. The indicator light on the button is blinking
twice to indicate the system’s switching on. It
stays lit once the PowerCase is ready for use.
3. Press the ON / OFF button for at least 3
seconds to switch off the station. Make sure
not to store it while discharged.
1
Use
1. Plug your device to the PowerCase using
a compatible type 2 outlet on the station’s
power outlet.
2. You are now powering your application thanks
to the PowerCase and you can use it as you
wish.
3. Unplug the cable and switch off the
PowerCase to end the use.
2
The PowerCase can only be used in a - 10 °C to + 40 °C temperature range.
It follows a specic security protocol that cannot be bent outside this range.
Charge is impossible if you exceed the 0 to + 45 °C temperature range.
Discharge is impossible if you exceed the - 20 °C to + 60 °C temperature range.
5/8
TYVA Smart Dashboard
Download
Android devices
Download the app via
the Google Play Store
Download our TYVA Smart Dashboard monitoring app, the genuine mobile dashboard available on Android and
iOS smartphones and tablets, then connect yourself to the system with Bluetooth!
iOS devices
Download the app via
the App Store
By downloading the TYVA Smart Dashboard app, you accept the terms and conditions of TYVA Energie’s Privacy policy.
Learn more: https://tyva-energie.com/en/privacy-policy/
The TYVA Smart Dashboard digital app allows you to supervise the global system of your portable power
station made up of TYVA Energie’s lithium batteries. It includes four tabs:
Interface
Global
overview of
information
Homepage
Temperature
and voltage
data
Properties
Temperature,
power, voltage and
current follow up
Graphs
Warnings (blue
icon) and errors
(orange icon)
Alerts
6/8
Status
Indicator light
The light in the middle of the ON/OFF button repeatedly blinks depending on the PowerCase’s various states
as described below:
Digital alerts
Notications can be seen in the « Alerts » tab of TYVA Smart Dashboard app:
• Low Voltage
• High Voltage
• NTC Issue
• Warning Bluetooth
• Data Log Issue
• Under-temperature
• Over-temperature
• Under-voltage
• Over-voltage
• Over-current
• PDU Lock
• PDU Failure
• PDU Over-temperature
• Charge Error
• Cellule Issue
• Short Circuit
• Slave Silent
• AFE Issue
• Short Circuit on
Precharge
Status Type of pulse Description
Idle 1 ash
PduCurrentError 2 ashes
VoltageError 3 ashes
TemperatureError 4 ashes
SystemError 5 ashes
Charge mode Continuous light
disrupted by 1 ash
Discharge mode
Continuous light
disrupted by 2
ashes
7/8
Access to the Moduloo
Ex range’s guides, user
manuals and support
Any question?
Prior to this guide, you must
imperatively refer to the safety
instructions and the directives listed
in the user manual of the PowerCase
Table of contents
