Ubiquiti RocketDish RD-5G30 User manual

25.02.2020 RD-5G30 Quck Start Gude
https://dl.ubnt.com/qsg/RD-5G30/RD-5G30_EN.html 1/12
D  sh Reector Antenna Feed Mount Bracket
Protect  ve Shroud Pole Clamps (Qty. 2) Stab  l  zer Brackets (Qty. 2)
RF Cables (Qty. 2) Elevat  on Rod M10x150 Carr  age Bolts (Qty. 4)
M10x100 Bolts (Qty. 2) M10x25 Carr  age Bolts (Qty. 3) M4 Screws (Qty. 4)
Package Contents
RD-5G30 Qu  ck Start Gu  de

25.02.2020 RD-5G30 Quck Start Gude
https://dl.ubnt.com/qsg/RD-5G30/RD-5G30_EN.html 2/12
Installat  on Requ  rements
5 GHz Rocket® rad  o (sold separately)
Ph  ll  ps #1 screwdr  ver
16 mm or 5/8" wrench
24 mm wrench
Sh  elded Category 5 (or above) cabl  ng w  th dra  n w  re should be used for all w  red
Ethernet connect  ons and should be grounded through the AC ground of the PoE.
We recommend that you protect your networks from harmful outdoor env  ronments
and destruct  ve ESD events w  th  ndustr  al-grade, sh  elded Ethernet cable from
Ub  qu  t  . For more deta  ls, v  s  t u  .com/toughcable
Hardware Installat  on
IMPORTANT: Handle the D  sh Reector w  th care. Deformat  ons  n  ts shape
may reduce the antenna’s effect  veness.
1.
IMPORTANT: The D  sh Reector and Antenna Feed are keyed so the
Antenna Feed can only be  nstalled  n a s  ngle or  entat  on.
IMPORTANT: Do not handle the antenna by the Antenna Feed once the feed
 s connected.
2.
RD-5G30 Qu  ck Start Gu  de

25.02.2020 RD-5G30 Quck Start Gude
https://dl.ubnt.com/qsg/RD-5G30/RD-5G30_EN.html 3/12
3.
4.
RD-5G30 Qu  ck Start Gu  de

25.02.2020 RD-5G30 Quck Start Gude
https://dl.ubnt.com/qsg/RD-5G30/RD-5G30_EN.html 4/12
5.
6.
7.
RD-5G30 Qu  ck Start Gu  de

25.02.2020 RD-5G30 Quck Start Gude
https://dl.ubnt.com/qsg/RD-5G30/RD-5G30_EN.html 5/12
8.
9.
10.
RD-5G30 Qu  ck Start Gu  de

25.02.2020 RD-5G30 Quck Start Gude
https://dl.ubnt.com/qsg/RD-5G30/RD-5G30_EN.html 6/12
11.
12.
13.
RD-5G30 Qu  ck Start Gu  de

25.02.2020 RD-5G30 Quck Start Gude
https://dl.ubnt.com/qsg/RD-5G30/RD-5G30_EN.html 7/12
14.
RD-5G30 Qu  ck Start Gu  de

25.02.2020 RD-5G30 Quck Start Gude
https://dl.ubnt.com/qsg/RD-5G30/RD-5G30_EN.html 8/12
15.
RD-5G30 Qu  ck Start Gu  de

25.02.2020 RD-5G30 Quck Start Gude
https://dl.ubnt.com/qsg/RD-5G30/RD-5G30_EN.html 9/12
16.
17.
RD-5G30 Qu  ck Start Gu  de

25.02.2020 RD-5G30 Quck Start Gude
https://dl.ubnt.com/qsg/RD-5G30/RD-5G30_EN.html 10/12
Spec  f  cat  ons
RocketD  sh RD-5G30
D  mens  ons 650 x 650 x 304 mm
(25.59 x 25.59 x 11.97")
We  ght 9.8 kg
(21.61 lb)
Frequency 5.1 - 5.9 GHz
Ga  n 30 dB 
HPOL Beamw  dth 5° (3 dB)
VPOL Beamw  dth 5° (3 dB)
Front-to-Back Rat  o -34 dB
Max. VSWR 1.7:1
W  nd Surv  vab  l  ty 200 km/h
(125 mph)
W  nd Load  ng 787 N @ 200 km/h
(177 lbf @ 125 mph)
Polar  zat  on Dual L  near
RD-5G30 Qu  ck Start Gu  de

25.02.2020 RD-5G30 Quck Start Gude
https://dl.ubnt.com/qsg/RD-5G30/RD-5G30_EN.html 11/12
RocketD  sh RD-5G30
Cross-Pol Isolat  on 35 dB M  n.
Mount  ng Un  versal Pole Mount, Rocket Bracket, and
Weatherproof RF Jumpers Included
Safety Not  ces
1. Read, follow, and keep these  nstruct  ons.
2. Heed all warn  ngs.
3. Only use attachments/accessor  es spec  f  ed by the manufacturer.
WARNING: Do not use th  s product  n locat  on that can be submerged by water.
WARNING: Avo  d us  ng th  s product dur  ng an electr  cal storm. There may be a remote
r  sk of electr  c shock from l  ghtn  ng.
Electr  cal Safety Informat  on
1. Compl  ance  s requ  red w  th respect to voltage, frequency, and current requ  rements  nd  cated
on the manufacturer’s label. Connect  on to a d  fferent power source than those spec  f  ed may
result  n  mproper operat  on, damage to the equ  pment or pose a f  re hazard  f the l  m  tat  ons
are not followed.
2. There are no operator serv  ceable parts  ns  de th  s equ  pment. Serv  ce should be prov  ded only
by a qual  f  ed serv  ce techn  c  an.
L  m  ted Warranty
u  .com/support/warranty
The l  m  ted warranty requ  res the use of arb  trat  on to resolve d  sputes on an  nd  v  dual bas  s, and,
where appl  cable, spec  fy arb  trat  on  nstead of jury tr  als or class act  ons.
Compl  ance
RF Exposure Warn  ng
The antenna and transm  tter must be  nstalled to prov  de a separat  on d  stance from all persons
and must not be located or operat  ng  n conjunct  on w  th any other antenna or transm  tter. For the
spec  f  c separat  on d  stance, refer to the Qu  ck Start Gu  de for your Rocket dev  ce (transm  tter).
L’antenne et l’émetteur do  t être  nstallé pour fourn  r une d  stance de séparat  on de toute les
personnes et ne do  t pas être s  tué ou opérant en conjonct  on avec une autre antenne ou un autre
émetteur. Pour la d  stance spéc  f  que de séparat  on, se référer au Gu  de de démarrage rap  de pour
votre appare  l Rocket (l’émetteur).
WEEE Compl  ance Statement
RD-5G30 Qu  ck Start Gu  de

25.02.2020 RD-5G30 Quck Start Gude
https://dl.ubnt.com/qsg/RD-5G30/RD-5G30_EN.html 12/12
Declarat  on of Conform  ty
Onl  ne Resources
© 2020 Ub  qu  t  Inc. All r  ghts reserved.
RD-5G30 Qu  ck Start Gu  de