Ubiquiti airMAX Quick Mount User manual

Tool-less Mount for Ubiquiti® CPE Devices
Model: Quick-Mount
Quick-Mount Quick Start Guide

Package Contents
Mount Arm
Universal Ball Mount
Bracket Mount
Rotation Collar
Stacking Washer
Ball Mount Washer
Supported Products
The Quick Mount is compatible with the GigaBeam™, LTU™ Lite, NanoBeam®, NanoStation®,
NanoStationloco, and UniFi® Building-to-Building Bridge.
•NBE-2AC-13, NBE-M5-16, UBB, or GBE using the Universal Ball Mount
•NBE-5AC-Gen2 or NBE-M5-19 using the Universal Ball Mount and Metal Washer
•loco5AC, NS-5AC, or LTU-Lite using the Ball Mount Assembly

Hardware Overview
Stacking Washer
Ball Mount Washer
Part of the Quick-Mount assembly that locks the
Rotation Collar into place.
Used in conjunction with the Universal Ball
Mount when installing the NBE
-5AC-Gen2 or
NBE-M5-19.
Rotation Collar
Universal Ball Mount
Part of the Quick-Mount assembly that sta
bilizes
the base of the Mount Arm.
Used when installing the NBE-5AC-Gen2,
NBE
-2AC-13, NBE-M5-19, NBE-M5-
16, UBB,
or GBE.
Mount Arm
Bracket Mount
Adjustable mount compatible with a variety of
Ubiquiti CPE devices.
Used when installing the loco5AC, NS-5AC,
or LTU-Lite.

Models
•NBE-2AC-13
•NBE-M5-16
•UBB
•GBE
Components
Note:
The device’s Lock Ring will also be used.

Models
•NBE-5AC-Gen2
•NBE-M5-19
Components
Note:
The device’s Lock Ring will also be used.

Models
•loco5AC
•NS-5AC
•LTU-Lite
Components

Installation
Before You Begin
Insert the Mount Arm into the Rotation Collar and press until it is locked in.
Note:
The screw end should extend past the Rotation Collar for installation, as shown
below.

1.
Optional

2.
3.
4.

5.
Note:
Add the Ball Mount Washer when installing the NBE-5AC-Gen2 or NBE-M5-
19.
OR