Ubiquiti Quick-Mount User manual

Mount Arm Universal Ball Mount Bracket Mount
Rotation Collar Stacking Washer Ball Mount Washer
Package Contents
Supported Products
The Quick Mount is compatible with the GigaBeam™, LTU™ Lite, NanoBeam®,
NanoStation®, NanoStationloco, and UniFi® Building-to-Building Bridge.
NBE-2AC-13, NBE-M5-16, UBB, or GBE using the Universal Ball Mount
NBE-5AC-Gen2 or NBE-M5-19 using the Universal Ball Mount and Metal Washer
loco5AC, NS-5AC, or LTU-Lite using the Ball Mount Assembly
Quick-Mount Quick Start Guide

Stacking Washer
Hardware Overview
Part of the Quick-Mount assembly that locks the Rotation Collar into place.
Quick-Mount Quick Start Guide

Rotation Collar
Mount Arm
Ball Mount Washer
Universal Ball Mount
Bracket Mount
Part of the Quick-Mount assembly that stabilizes the base of the Mount Arm.
Adjustable mount compatible with a variety of Ubiquiti CPE devices.
Used in conjunction with the Universal Ball Mount when installing the NBE ‐ 5AC ‐ Gen2
or NBE-M5-19.
Used when installing the NBE-5AC-Gen2, NBE-2AC-13, NBE-M5-19, NBE-M5-16, UBB, or
GBE.
Used when installing the loco5AC, NS ‐ 5AC, or LTU-Lite.
Models
NBE-2AC-13
NBE-M5-16
UBB
GBE
Components
Quick-Mount Quick Start Guide

Note: The device’s Lock Ring will also be used.
Models
NBE-5AC-Gen2
NBE-M5-19
Components
Quick-Mount Quick Start Guide

Note: The device’s Lock Ring will also be used.
Models
loco5AC
NS-5AC
LTU-Lite
Components
Quick-Mount Quick Start Guide

Installation
Before You Begin
Insert the Mount Arm into the Rotation Collar and press until it is locked in.
Quick-Mount Quick Start Guide

Note: The screw end should extend past the Rotation Collar for installation, as
shown below.
Quick-Mount Quick Start Guide

1.
Optional
Quick-Mount Quick Start Guide

2.
Quick-Mount Quick Start Guide

3.
Quick-Mount Quick Start Guide

4.
5.
Quick-Mount Quick Start Guide

Note: Add the Ball Mount Washer when installing the NBE-5AC-Gen2 or NBE-
M5-19.
OR
6.
Quick-Mount Quick Start Guide

OR
7.
Quick-Mount Quick Start Guide

OR
Specications
Quick-Mount
Quick-Mount Quick Start Guide

Quick-Mount
Dimensions 104 x 122 x 81 mm (4.09 x 4.80 x 3.19")
Weight 375 g (0.83 lb)
Device Support
Ball Mount Assembly
Universal Ball Mount
Universal Ball Mount with Ball
Mount Washer

loco5AC, NS-5AC, or LTU-Lite
NBE-2AC-13, NBE-M5-16, UBB, or GBE
NBE-5AC-Gen2, NBE-M5-19
Limited Warranty
ui.com/support/warranty
The limited warranty requires the use of arbitration to resolve disputes on an individual basis, and,
where applicable, specify arbitration instead of jury trials or class actions.
Declaration of Conformity
Online Resources
© 2019-2020 Ubiquiti Inc. All rights reserved.
Quick-Mount Quick Start Guide